Difference between revisions of "SWLEDX8-I2C"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Rev 2) |
||
| Line 48: | Line 48: | ||
* Functionally the same as Rev X1 | * Functionally the same as Rev X1 | ||
* Adds silkscreen Front/Rear | * Adds silkscreen Front/Rear | ||
| + | * Change Resistors from SMT (0805) to Through hole (1/8W) | ||
=== Rev X1 === | === Rev X1 === | ||
Revision as of 15:31, 23 May 2022
Contents
Features
- 16-Bit MCP23017
- I2C interface
- I2C Daisy-Chain (In/Out) connectors
- (3) I2C Address select jumpers for up to 8 devices per I2C bus
- SCL/SDA termination jumpers
- 2x10 pins
- 59mmx38mm
- (4) #4-40 mounting holes
- SWLEDx8-I2C can be used standalone or stacked together with the SWLEDX8 card
Build Options
- There are a number of options for using the card
- Stacked option with SWLEDX8 card
- Small footprint
- Low height/profile
Stacked option with SWLEDX8 card
- SWLEDX8 card mounts above this card
_REV2.png)
Small footprint option
_REV2.png)
Low height/profile option
_REV2.png)
Mechanicals
.PNG)
Rear Side Marking
_REV2.png)
Versions
Rev 2
- Functionally the same as Rev X1
- Adds silkscreen Front/Rear
- Change Resistors from SMT (0805) to Through hole (1/8W)
Rev X1
- Words, no issues
