Difference between revisions of "ER-VCA2-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 23: | Line 23: | ||
* POT2 = RV2 = Modulation Adjust Channel 2 | * POT2 = RV2 = Modulation Adjust Channel 2 | ||
| − | === J2 - Daughtercard === | + | === J2 - Daughtercard Eurorack Power === |
[[file:ER-VCA2-01-DB_J2.PNG]] | [[file:ER-VCA2-01-DB_J2.PNG]] | ||
Revision as of 00:32, 11 November 2022
Contents
Features
- Dual Voltage Controlled Amplifier (VCA)
- Based on HAGIWO's LM13700 Dual VCA - Modular Synth Made for 550 Yen
- LM13700 Operational Transconductance Amplifier
- Adjust POTS between VCA and Mod
- 3U tall
- 6HP wide
- 3 card set
- LM13700 based
- Eurorack
- +/- 12V Power, 10-pin power connector
Connectors
J1 - Daughtercard Pots
- POT1 = RV1 = Modulation Adjust Channel 1
- POT2 = RV2 = Modulation Adjust Channel 2
J2 - Daughtercard Eurorack Power
J3 - Daughtercard
- Controls card J3 = OUT1 (bottom left jack)
- Controls card J4 = OUT2 (bottom right jack)
- Controls card J5 = MOD1 (middle left jack)
- Controls card J6 = MOD2 (middle right jack)
- Controls card J7 = IN1 (top left jack)
- Controls card J8 = IN2 (top right jack)
Reference
- Dual Log/Linear VCA - Article by Ray Wilson
- Has adjustment procedure
Video
Checkout
Rev 1
- Headers between cards do not line up
- Fix on Controls card
- Make Rev 2 Controls card
- Move down bottom header J2 to match daughtercard
- Bend pins on bottom header between cards
- Fix on Controls card
