|
|
| (34 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | [[file:Eurorack_Plywood_Box_02_cropped-720px.jpg]]
| |
| − |
| |
| | == Synth Modules (Standalone) == | | == Synth Modules (Standalone) == |
| | | | |
| − | * Synthesizer interfaces and modules
| + | * [[Synth Modules (Standalone)]] |
| − | ** [[MIDI-IN-OUT]] - MIDI In/Out
| |
| − | ** [[SCF-2]] - Dual 3.5mm Audio Jacks (Scale, Clip, Filter_
| |
| − | ** [[SYNTH-VCO-01]] - Synth Voltage Controlled Oscillator
| |
| − | ** [[SYNTH-MIDI-CTL-01]] - Synth MIDI Controller
| |
| − | ** [[SYNTH-MIDI-CV4-01]] - 4 Output MIDI to CV controller
| |
| − | | |
| − | === MIDI-IN-OUT ===
| |
| − | | |
| − | [[file:MIDI-IN-OUT_REV1_FRONT_3D.png]]
| |
| − | | |
| − | * [[MIDI-IN-OUT]] - MIDI In/Out
| |
| − | * MIDI In/Out Jacks
| |
| − | * 5V MIDI
| |
| − | * 3.3V or 5V Serial connections
| |
| − | * MIDI In is opto-isolated
| |
| − | * (2) 4-40 Mounting holes
| |
| − | | |
| − | === SCF-2 ===
| |
| − | | |
| − | * [[SCF-2]] - Dual 3.5mm Audio Jacks (Scale, Clip, Filter)
| |
| − | | |
| − | [[FILE:SCF-2_REV_1_FRONT_3D.png]]
| |
| − | | |
| − | * Digital Inputs or Outputs
| |
| − | * (2) 3.5mm Jacks
| |
| − | * Scaling resistors
| |
| − | * Schottky Clamping Diodes
| |
| − | * Filter cap
| |
| − | * Ring pin brought to connector
| |
| − | ** Ring pin is not used in Synth applications
| |
| − | ** Card can be used as a 3.5mm breakout
| |
| − | * (2) 4-40 mounting holes
| |
| − | | |
| − | === SYNTH-VCO-01 ===
| |
| − | | |
| − | * [[SYNTH-VCO-01]] - Synth Voltage Controlled Oscillator
| |
| − | | |
| − | [[FILE:SYNTH-VCO-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | * Build of [https://note.com/solder_state/n/nca6a1dec3921 Pico VCO by HAGIWO]
| |
| − | * Digital Voltage Controlled Oscillator (VCO)
| |
| − | * Three modes: Wavefold, FM and AM
| |
| − | * PWM output with 2 pole low pass filter
| |
| − | * Each mode has eight built-in waveforms
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XIAO RP2040] CPU
| |
| − | * (5) Pushbuttons
| |
| − | ** Octave Up/Down
| |
| − | ** Mode Up/Down (Wavefold, FM and AM)
| |
| − | ** Push Timbre switches between 8 waveforms
| |
| − | * (2) Knobs
| |
| − | ** Freq fine adjust
| |
| − | ** Mod adjust
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (4) 6-32 mounting holes
| |
| − | ** Stacks with [[SYNTH-MIDI-CTL-01]] card
| |
| − | | |
| − | === SYNTH-MIDI-CTL-01 ===
| |
| − | | |
| − | * [[SYNTH-MIDI-CTL-01]] - Synth MIDI Controller
| |
| − | | |
| − | [[FILE:SYNTH-MIDI_CTL-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | | |
| − | * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
| |
| − | ** Translate from Japanese to English using browser
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XAIO RP2040 CPU]
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
| |
| − | * MIDI In/Out
| |
| − | ** Standard MIDI Jacks
| |
| − | ** MIDI out jack for future functionality
| |
| − | * (2) 0-5V Analog CV outs
| |
| − | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
| |
| − | *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
| |
| − | ** Use with [[SYNTH-VCO-01]]
| |
| − | *** CV1 = V/OCT
| |
| − | *** CV2 = MOD
| |
| − | * (2) Digital Outs, eX:
| |
| − | ** Gate
| |
| − | ** Clock
| |
| − | * Pot supports setting Clock rate
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (6) 6-32 Mounting holes
| |
| − | ** Stacks with [[SYNTH-VCO-01]] card
| |
| − | | |
| − | === SYNTH-MIDI-CV4-01 ===
| |
| − | | |
| − | * [[SYNTH-MIDI-CV4-01]] - 4 Output MIDI to CV controller
| |
| − | | |
| − | [[FILE:SYNTH-MIDI_CV4-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
| |
| − | ** Translate from Japanese to English using browser
| |
| − | ** Removes Digital Outputs
| |
| − | ** Has 4 Analog Outputs instead of 2
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XAIO RP2040 CPU]
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
| |
| − | * MIDI In
| |
| − | ** Standard MIDI Jacks
| |
| − | ** MIDI out jack for future functionality
| |
| − | * (4) 0-5V Analog CV outs
| |
| − | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
| |
| − | *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
| |
| − | ** Use with [[SYNTH-VCO-01]]
| |
| − | *** CV_1 = V/OCT
| |
| − | *** CV_2 = MOD
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (6) 6-32 Mounting holes
| |
| − | ** Stacks with [[SYNTH-VCO-01]] card
| |
| | | | |
| | == Eurorack Modules == | | == Eurorack Modules == |
| | | | |
| − | === ER-ADSR-555-01 - Eurorack ADSR Module ===
| + | * [[Eurorack Synth Modules]] |
| − | | |
| − | [[ER-ADSR-555-01]]
| |
| − | | |
| − | [[file:ER-ADSR-555-01_Set.png]]
| |
| − | | |
| − | * Attack-Delay-Sustain-Release Eurorack ADSR Module
| |
| − | * 555 Based design
| |
| − | * [https://benjiaomodular.com/post/2022-02-02-mini-adsr/ Benjie Jiao MiniADSR]
| |
| − | ** Original was based on Barry Klein design
| |
| − | ** As built by [https://www.schmitzbits.de/adsr.html schmitzbits design] - "The Fastest Envelope in the West"
| |
| − | ** A, D, and R Pots should be log pots
| |
| − | * Pot silkscreen should show DECAY not DELAY
| |
| − | | |
| − | === ER-MIDI-CV4-01 - Eurorack 4X CV Module ===
| |
| − | | |
| − | [[ER-MIDI-CV4-01]]
| |
| − | | |
| − | [[FILE:ER-MIDI-CV4-01_SET_3D-720px.png]]
| |
| − | | |
| − | * Eurorack 6HP, 3U module
| |
| − | * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
| |
| − | ** Translate from Japanese to English using browser
| |
| − | ** Removes Digital Outputs
| |
| − | ** Has 4 Analog Outputs instead of 2
| |
| − | * Based also on [[SYNTH-MIDI-CV4-01]]
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XAIO RP2040 CPU]
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
| |
| − | * MIDI In on TRS Type A jack
| |
| − | * (4) 0-5V Analog CV outs
| |
| − | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
| |
| − | *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
| |
| − | ** Use with [[SYNTH-VCO-01]]
| |
| − | *** CV_1 = V/OCT
| |
| − | *** CV_2 = MOD
| |
| − | * Standard EuroRack 16 pin header
| |
| − | | |
| − | === ER-MIDI-THRU - Eurorack MIDI Thru===
| |
| − | | |
| − | [[ER-MIDI-THRU]]
| |
| − | | |
| − | [[FILE:ER-MIDI-THRU_SET-3D-720pxV.png]]
| |
| − | | |
| − | * MIDI In on DIN-5 or 3.5mm TRS Type A
| |
| − | * 4 Channel MIDI outputs on 3.5mm TRS Type A
| |
| − | * Activity LED
| |
| − | * 6 HP wide (30mm)
| |
| − | * 3U tall
| |
| − | * Eurorack power jack
| |
| − | ** Uses 5V
| |
| − | | |
| − | === ER-MIXER5-01 - Eurorack 5 Channel Mixer ===
| |
| − | | |
| − | * [[ER-MIXER5-01]]
| |
| − | * Eurorack 6HP
| |
| − | * Adapted from [https://note.com/solder_state/n/nffc1a33053be HAGIWO's 5 Channel Mixer Module]
| |
| − | * Separate individual input pots and output pot
| |
| − | * Use A taper pots to mix audio signals
| |
| − | * Use B taper pots to mix control voltage signals
| |
| − | * Views: Front Panel, Front (controls), Parts side
| |
| − | | |
| − | [[FILE:SYNTH-MIXER5-01_SET_FRONT_3D-720pxV.png]]
| |
| − | | |
| − | === SYNTH-MIXER6-01 - Eurorack 6 Channel Mixer ===
| |
| − | | |
| − | * [[SYNTH-MIXER6-01]] | |
| − | * Eurorack 6HP
| |
| − | * Adapted from [https://note.com/solder_state/n/nffc1a33053be HAGIWO's 5 Channel Mixer Module]
| |
| − | * '''Rear card is too tall to fit in rack between rail'''
| |
| − | * Hacksaw off top of card - remove J1, J2, RV1, RV2 to make 4 in mixer
| |
| − | ** Too tight at the bottom, need to hack off J2, RV2
| |
| − | * Move up holes when mounting card to panel
| |
| − | * Views: Front (controls), Parts side, Front Panel
| |
| − | | |
| − | [[FILE:SYNTH-MIXER6-01_SET_FRONT_3D.png]]
| |
| − | | |
| − | === SYNTH-CV-POTS-5 ===
| |
| − | | |
| − | [[file:SYNTH-CV-POTS-5_REWORK_ANNOTATED_rear.png]]
| |
| − | | |
| − | * Provides 5 Control Voltage Pots for manual control and testing of CV inputs
| |
| − | * Use [[SYNTH-MIXER6-01]] card with rework
| |
| − | ** Do not install Opamp
| |
| − | ** Do not install any passives
| |
| − | ** Clip J2-J7 tip switch pins (edge of card) - verify grounds removed
| |
| − | ** Hacksaw off top of card - J1-J2, RV1-RV2
| |
| − | ** Cut etches from J3-J6 (tip) to RV3-RV6 (bottom pin)
| |
| − | ** Add wires J3-J7 (tips) to RV3-RV7 (center pins)
| |
| − | ** Add wire U1-7 to U1-2
| |
| − | ** Fill holes J8 pins 1,2
| |
| − | ** Install 2x4 header in J8 (pins 3-10)
| |
| − | ** P-Touch labels
| |
| − | *** Label over top 2 holes "CV-POTS-5"
| |
| − | *** Relabel next 5 holes as CV1-CV5
| |
| − | **** Blank label over bottom 2 holes
| |
| − | *** Label end of J8 "CV+"
| |
| − | | |
| − | === ER-PROTO-01 ===
| |
| − | | |
| − | [[ER-PROTO-01]]
| |
| − | | |
| − | [[FILE:ER-PROTO-PANEL-01-SET_FRONT_REAR-3D-720px.png]]
| |
| − | | |
| − | * Eurorack Prototyping card set
| |
| − | * 6 HP wide (30mm) front panel
| |
| − | * 3U tall
| |
| − | * 6 POTS
| |
| − | ** Series resistors on pot wiper
| |
| − | ** All 3 pot pins brought to top header
| |
| − | * 4 Jacks
| |
| − | * Tip/sleeve brought to header near middle/bottom
| |
| − | * Pots on top, jacks on bottom
| |
| − | ** Easier to adjust pots without bumping into pots
| |
| − | ** Pots more often accessed than jacks
| |
| − | * Large prototyping area
| |
| − | * +12V, -12V down board edges
| |
| − | * 5V/GND down center of card
| |
| − | * Bussed connections horizontally
| |
| − | * Front Panel with generic labels
| |
| − | ** Cover with White on Black P-Touch labels
| |
| − | | |
| − | === ER-VCA2-01 - 2 Channel Voltage Controlled Amplifier ===
| |
| − | | |
| − | * [[ER-VCA2-01]]
| |
| − | | |
| − | [[FILE:ER-VCA2-01-CTRLS_REV1_SET-3d-720PX.png]]
| |
| − | | |
| − | * Dual VCA
| |
| − | * Adjust between VCA and Mod
| |
| − | * 3U tall
| |
| − | * 6HP wide
| |
| − | * 3 card set
| |
| − | * LM13700 based
| |
| − | * Eurorack
| |
| − | * +/- 12V Power, 10-pin power connector
| |
| − | | |
| − | === ER-VCF-01 - Voltage Controlled Filter ===
| |
| − | | |
| − | [[ER-VCF-01]]
| |
| − | | |
| − | [[FILE:ER-ER-VCF-01-SET-3D-720PX.png]]
| |
| − | | |
| − | * 3U tall
| |
| − | * 6 HP (30mm) wide
| |
| − | * Uses [[ER-PROTO]] Front Panel and controls cards
| |
| − | ** Re-label jacks using P-Touch labels
| |
| − | * [https://github.com/tkilla64/eurorack/blob/main/diode-vcf/VCF.JPG Tommy Killander Design]
| |
| − | ** Low pass only version of Moritz design
| |
| − | * [https://www.youtube.com/watch?v=GX_bh88I6nM Video]
| |
| − | | |
| − | === ER-VCO-03 - Eurorack RP2040 VCO ===
| |
| − | | |
| − | * [[ER-VCO-03]]
| |
| − | * Eurorack 6HP
| |
| − | * (3) Card set
| |
| − | * Views: Control Panel rear side, Control Panel controls side, Logic card component side, Logic card rear side, Front Panel
| |
| − | | |
| − | [[FILE:SYNTH-VCO_CTL-01-CARD_SET-3D.png]]
| |
| − | | |
| − | === Eurorack +/- 12V Power Supply ===
| |
| − | | |
| − | * [https://www.mouser.com/ProductDetail/Hammond-Manufacturing/166JB24?qs=gF4h2Znc3LDhQdyLDLdnew%3D%3D 115VAC in, 24V CT, 24 VA Transformer]
| |
| − | ** 12*1.414 = ~17V
| |
| − | *** Leaves 5V for regulator headroom and ripple
| |
| − | * [https://www.mouser.com/ProductDetail/511-L7812CV L7812CV, +12V, 1.5A Regulator]
| |
| − | * [https://www.mouser.com/ProductDetail/511-L7912CV L7912CV, -12V, 1.5A Regulator]
| |
| − | | |
| − | [[FILE:DUAL_LINEAR_PS_SCHEM.PNG]]
| |
| − | | |
| − | === Eurorack DIY Panel ===
| |
| − | | |
| − | * Front/Back View
| |
| − | * Left = top
| |
| − | | |
| − | [[file:EUROPANEL-6HP_rev1_front_rear-3d.png]]
| |
| − | | |
| − | * Based on HAGIWO design
| |
| − | | |
| − | <video type="youtube">mtH72Yjct5I</video>
| |
| − | | |
| − | * 6HP wide
| |
| − | * 3U tall
| |
| − | * Power and Ground bus on either side of the card
| |
| − | * Reduces wiring
| |
| − | * Slotted mounting holes
| |
| − | * 5mm Grid on rear side makes it easier to locate connectors for drilling
| |
| | | | |
| | == MOD Designs == | | == MOD Designs == |
| | | | |
| − | * Good for prototyping, but not Eurorack | + | * [[Synth Mod Designs]] |
| − | * Stackable via standoffs
| |
| − | * 100mm wide
| |
| − | * 47mm deep
| |
| − | * 4-40 mounting holes
| |
| − | | |
| − | === MOD-SCF-JACKS ===
| |
| − | | |
| − | [[MOD-CF-JACKS]] | |
| − | | |
| − | [[file:MOD-SCF-JACKS_FRONT_3D.png]]
| |
| − | | |
| − | [[file:MOD-CF-JACKS_FILTER_J5.PNG]]
| |
| − | | |
| − | [[file:MOD-CF-JACKS_FILTER_SCHEM.PNG]]
| |
| − | | |
| − | === MOD-DIY ===
| |
| − | | |
| − | [[MOD-DIY]]
| |
| − | | |
| − | [[file:MOD-DIY_FRONT_3D.png]]
| |
| − | | |
| − | * DIY "breadboard"
| |
| − | * Rear pins bs to top/bottom
| |
| − | * Extra connections on edge
| |
| − | * Busses marked on silkscreen
| |
| − | * (2) Horizontal busses in center for power/ground
| |
| − | | |
| − | === MOD-MIDI-THRU ===
| |
| − | | |
| − | [[MOD-MIDI-THRU]]
| |
| − | | |
| − | [[file:MOD-MIDI-THRU_FRONT_3D.png]]
| |
| − | | |
| − | * DIN-5 in
| |
| − | * (4) TRS Type A outs
| |
| − | | |
| − | === MOD-NANO-CPU ===
| |
| − | | |
| − | [[MOD-NANO-CPU]]
| |
| − | | |
| − | [[file:MOD-NANO-CPU_FRONT-3D.png]]
| |
| − | | |
| − | * Arduino NANO
| |
| − | * Runs [https://sensorium.github.io/Mozzi/ MOZZI Arduino library]
| |
| − | ** MOZZI audio output
| |
| − | ** Standard or HiFi
| |
| − | * MIDI In on TRS Type A
| |
| − | * Remove J4 (EN_MIDI) when USB is plugged into NANO CPU
| |
| − | | |
| − | === MOD-POTS ===
| |
| − | | |
| − | [[MOD-POTS]]
| |
| − | | |
| − | [[file:MOD-POTS_FRONT_3D.png]]
| |
| − | | |
| − | * 4 pots
| |
| − | ** Type A = "Audio" log pots
| |
| − | *** Used for Volume controls
| |
| − | ** Type B = Linear pots
| |
| − | *** Used for CV
| |
| − | * All pins brought to connector
| |
| − | * Headers to optionally pull pot ends up/down
| |
| − | * Can be used as controls (end pulled up/down or volume controls (CW, CCW brought to pins)
| |
| − | * Optional R/C filter
| |
| − | | |
| − | === MOD-XIAO-RP2040-CPU ===
| |
| − | | |
| − | [[MOD-XIAO-RP2040-CPU]]
| |
| − | | |
| − | [[file:MOD-XIAO-RP2040-CPU_FRONT-3D.png]]
| |
| − | | |
| − | * XIAO RP2040 CPU
| |
| − | * MIDI In on TRS Type A
| |
| − | * (4) Analog Inputs or Digital GPIO
| |
| − | * (7) Digital GPIO
| |
| − | * SD Card on RP2040 SPI bus
| |
| − | | |
| − | == Box Build ==
| |
| − | | |
| − | [[file:Eurorack_Plywood_Box_02_cropped-720px.jpg]]
| |
| − | | |
| − | === Box Construction ===
| |
| − | | |
| − | * 3/4" plywood
| |
| − | * 84 HP
| |
| − | * 18-3/8" Wide
| |
| − | * 6-1/2" tall
| |
| − | * 4-3/4" deep
| |
| − | * Glued together/clamped
| |
| − | ** Need screws?
| |
| − | * Did '''not''' use 1/4-20 screws, drilled small holes into back of rails and screwed rails down w/ wood screws
| |
| − | * Rails are flush to box edges
| |
| − | * Next one
| |
| − | ** Screw in rails before gluing up box
| |
| − | | |
| − | === Box Hotel Services ===
| |
| − | | |
| − | * Mean Well Power Supply
| |
| − | ** [https://www.mouser.com/ProductDetail/709-RT85B RT-85B]
| |
| − | *** 88W Power Supply
| |
| − | *** 5V, 8A
| |
| − | *** +12V, 3.5A
| |
| − | *** -12V, 0.5A
| |
| − | * 16 pin power distribution via perfboard (4 connectors with room for 2 more?
| |
| − | | |
| − | == Reference Docs ==
| |
| − | | |
| − | * [https://doepfer.de/home_e.htm Doepfer Eurocard inventor/specs]
| |
| − | ** [https://doepfer.de/a100_man/a100t_e.htm Principles of Voltage Control]
| |
| − | * [https://www.tigoe.com/pcomp/code/communication/midi/ MIDI Communication]
| |
| − | * [https://www.perfectcircuit.com/signal/midi-to-cv Creative Control Strategies: MIDI to CV]
| |
| − | * [https://www.behance.net/gallery/113377671/EuroPi-Making-EuroRack-Affordable EuroPi]
| |
| − | * [https://reverb.com/news/beginners-guide-to-eurorack-case-basics-oscillators-filters Eurorack Beginners Guide]
| |
| − | * [https://en.wikipedia.org/wiki/Eurorack Eurorack Wiki page]
| |
| − | * [https://github.com/clacktronics/AudioJacks KiCad Audio Jack Symbols]
| |
| − | * [https://www.midisoft.de/ MidiSoft]
| |
| − | ** [https://www.midisoft.de/EuroRackDimensions/EuroRack_Dimensions.html EuroRack Dimensions]
| |
| − | ** [https://www.midisoft.de/EuroRackDimensions/holes.jpg Panel Holes]
| |
| − | * [https://minimidi.world/#how-trs-midi-works A simplified guide to TRS MIDI]
| |
| − | * [https://www.midi.org/midi-articles/updated-how-to-make-your-own-3-5mm-mini-stereo-trs-to-midi-5-pin-din-cables How to Make Your Own 3.5mm mini stereo TRS-to-MIDI 5 pin DIN cables]
| |
| − | * [https://division-6.com/learn/eurorack-power/ Eurorack Power Connectors]
| |
| − | * [https://www.midi.org/specifications-old/item/midi-din-electrical-specification MIDI Electrical spec]
| |
| − | | |
| − | === Projects ===
| |
| − | | |
| − | * [https://github.com/elkayem/midi2cv elkayem midi2cv GitHub page] - Nano based project
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use Python
| |
| − | ** Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
| |
| − | ** This card only drives Note (Voltes/Oct, Mod)
| |
| − | * [https://github.com/benevpi/PicoPicoSynth PicoPicoSynth]
| |
| − | * [https://github.com/Deftaudio/Midi-boards Deftaudio GitHub] - KiCad footprints
| |
| − | * [http://graybloomfield.com/guitar/synth/ graybloomfield] - Very nice Arduino based designs
| |
| − | * [https://github.com/TomWhitwell/TuringMachine Turing Machine]
| |
| − | * [https://github.com/gavD/arduino-drum-machine DIY Hackable Arduino Drum Machine]
| |
| − | ** [https://www.youtube.com/watch?v=4u4Px2gMwGw vIDEO]
| |
| − | * [https://www.notesandvolts.com/2014/07/build-auduino-granular-synth-part-1.html Build the Auduino Granular Synth]
| |
| − | * [https://benjiaomodular.com/ Benjie's Synth DIY notes] - Nice docs
| |
| − | * [https://www.reddit.com/r/synthdiy/ REDDIT Synth DIY]
| |
| − | * [https://github.com/tkilla64/eurorack tkilla64] Nice collection of Eurorack module designs - mostly Gerbers
| |
| − | * [https://github.com/ScottBillingsley/Philosophy-of-Noise Scott Billingsley Philosophy of Noise] - GitHub Repo
| |
| − | | |
| − | === Other Notes ===
| |
| − | | |
| − | ==== Daughterboard Heights ====
| |
| − | | |
| − | * From notes on [https://www.youtube.com/watch?v=HMDGYm91Q1Y How to Make Great Looking Modular Front Panels - Part 3 Module Circuit Board Layout]
| |
| − | ** The absolute maximum of other boards I've seen is 111,5 mm and the TipTop Happy Ending Kit offers a space of 112,5 mm
| |
| − | * 114.8mm measured between 3U Synthrotek rails
| |
| − | ** 128.5mm - 114.8mm = 13.7mm both sides, 6.875mm per side
| |
| − | ** 111.5mm daughtercard, leaves 8.5mm clearances top/bottom
| |
| − | | |
| − | ==== Part Orientations ====
| |
| − | | |
| − | * For pots with built-in pointers, pot pins go down for pointer to go up at center point
| |
| − | | |
| − | ==== Front Panel Jacks ====
| |
| − | | |
| − | * [[Eurorack Panel Jacks]]
| |
| − | | |
| − | ==== Alpha Pots ====
| |
| − | | |
| − | * Certain Alpha pot models can be mounted to a card behind the Front Panel
| |
| − | | |
| − | ===== Long Shaft with pointers =====
| |
| − | | |
| − | * [https://store.synthrotek.com/9mm-Plastic-Shaft-Potentiometer_p_785.html Synthrotek store page]
| |
| − | | |
| − | [[file:Synthrotek_9mm_Pots.PNG]]
| |
| − | | |
| − | * These pots have the same footprint as Alpha/Synthrotek metal shaft pots, but with a longer shaft
| |
| − | * They are knurled with a white pointer, so they don't need any knobs
| |
| − | * They are suitable for many different Eurorack projects
| |
| − | ** .05W
| |
| − | ** 20% Tolerance
| |
| − | | |
| − | ===== "Thonk" TALL TRIMMER 9MM POTS =====
| |
| − | | |
| − | * [https://www.thonk.co.uk/shop/ttpots/ Thonk] lists original manufacturer as [https://www.song-huei.com/ SONG HUEI]
| |
| − | ** [https://www.song-huei.com/product-R0904N-R0904N.html SONG HUEI R0904N Page]
| |
| − | * Shaft length of 25mm as measured from the "bottom" of the pot to the top of the shaft
| |
| − | * Pots have black shafts with white pointer of top
| |
| − | * [https://www.thonk.co.uk/wp-content/uploads/2014/10/R0904N_Thonk.pdf Datasheet SONG HUEI]
| |
| − | | |
| − | [[File:SongHui_PartPic.PNG]]
| |
| − | | |
| − | [[File:SongHuei_Ordering.PNG]]
| |
| − | | |
| − | [[File:SongHuei_Marking.PNG]]
| |
| − | | |
| − | [[File:SongHuei_Mechs.PNG]]
| |
| − | | |
| − | ===== Alpha pots =====
| |
| − | | |
| − | * [https://www.mouser.com/c/?q=RV09AF-40 RV09AF-40 Mouser Search]
| |
| − | | |
| − | [[file:RV09AF-40_ALPHA_POT_pic.png]]
| |
| − | | |
| − | [[file:RV09AF-40_ALPHA_POT_Mechs.png]]
| |
| − | | |
| − | [[file:RV09AF-40_ALPHA_POT_Ordering.PNG]]
| |
| − | | |
| − | === Module Kits ===
| |
| − | | |
| − | * [https://www.ericasynths.lv/ Erica Synths]
| |
| − | ** [https://github.com/erica-synths/diy-eurorack Erica Synths DIY GitHub]
| |
| − | * [https://syntherjack.net/category/project/ SyntherJack] - DIY Synths
| |
| − | * [https://www.befaco.org/# BEFACO] - Kits
| |
| − | * [https://store.kassutronics.net/eurorack-diy-c-1/ Kassutronics] DIY Store
| |
| − | ** [https://github.com/kassu/kassutronics Kassutronics] DIY GitHub
| |
| − | * [http://musicfromouterspace.com/index.php?MAINTAB=HOME&VPW=1024&VPH=500 Music From Outer Space]
| |
| − | * [https://www.thonk.co.uk/shop/ Thonk Shop] - in UK
| |
| − | * [https://www.synthrotek.com/ synthrotek]
| |
| − | * [https://github.com/TomWhitwell/TuringMachine TuringMachine Mark 2]
| |
| − | | |
| − | === Software ===
| |
| − | | |
| − | * [https://docs.circuitpython.org/projects/midi/en/latest/api.html adafruit_midi CircuitPython API]
| |
| − | ** [https://github.com/adafruit/Adafruit_CircuitPython_MIDI/tree/main/examples Example code]
| |
| − | * [https://learn.adafruit.com/raspberry-pi-pico-led-arcade-button-midi-controller-fighter/coding-the-raspberry-pi-pico-midi-controller MIDI Controller in Python]
| |
| − | * [https://learn.adafruit.com/qt-py-rp2040-usb-to-serial-midi-friends/coding-the-qt-py-rp2040-usb-to-serial-midi-friends USB to Serial MIDI]
| |
| − | * [http://www.midieditor.org/ MidiEditor]
| |
| − | * [https://hello-world.blog.ss-blog.jp/2016-10-16 Convert binary files to C data arrays (Arduino)] - In Japanese
| |
| − | * [https://github.com/AntumDeluge/bin2header Binary to C Array]
| |
| − | * [https://sensorium.github.io/Mozzi/ Arduino Mozzi Library]
| |
| − | * [https://github.com/marcel-licence/esp32_basic_synth esp32_basic_synth]
| |
| − | * [https://github.com/marcel-licence/esp32_usb_midi esp32_usb_midi]
| |
| − | * [https://github.com/FortySevenEffects/arduino_midi_library arduino_midi_library]
| |
| − | * [https://github.com/rppicomidi/midi2usbhost Pico MIDI Host to MIDI UART Adapter]
| |
| − | | |
| − | === Hardware/Parts ===
| |
| − | | |
| − | * [https://store.synthrotek.com/ Synthrotek Store]
| |
| − | * [https://www.thonk.co.uk/shop/thonkiconn/ THONKICONN – 3.5MM JACK SOCKETS]
| |
| − | * Potentiometers are usually marked with an "A" for logarithmic taper or a "B" for linear taper;
| |
| − | * [https://www.mouser.com/c/passive-components/potentiometers-trimmers-rheostats/potentiometers/?q=RV09AF&orientation=Vertical RV09AF vertical mount is Alpha pot] part number
| |
| − | * [https://www.tubesandmore.com/products/potentiometer-song-huei-linear-9mm-tall 9mm Pots]
| |
| − | | |
| − | === Samples ===
| |
| − | | |
| − | * [https://samplefocus.com/tag/drums Drum Samples]
| |
| − | | |
| − | == HAGIWO Builds ==
| |
| − | | |
| − | * [https://www.reddit.com/r/synthdiy/search/?q=HAGIWO&restrict_sr=1&sr_nsfw= HAGIWO on Reddit]
| |
| − | | |
| − | {| class="wikitable"
| |
| − | ! FUNCTION
| |
| − | ! 3.5MM
| |
| − | ! POTS
| |
| − | ! TOGG
| |
| − | ! PBS
| |
| − | ! ROT
| |
| − | ! DIN5
| |
| − | ! CPU
| |
| − | ! LINK
| |
| − | |-
| |
| − | | MIDI-IN-OUT
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | NONE
| |
| − | |
| |
| − | |-
| |
| − | | SCF-2
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIDI-CTL-01
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | XAIO RP2040
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIDI-CV4-01
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | XAIO RP2040
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIXER6-01
| |
| − | | 7
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nffc1a33053be
| |
| − | |-
| |
| − | | SYNTH-VCO-01
| |
| − | | 4
| |
| − | | 2
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XAIO RP2040
| |
| − | | https://note.com/solder_state/n/nca6a1dec3921
| |
| − | |-
| |
| − | | SYNTH-VCO-03
| |
| − | | 4
| |
| − | | 2
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XAIO RP2040
| |
| − | | https://note.com/solder_state/n/nca6a1dec3921
| |
| − | |-
| |
| − | | No.56 Sample Drum
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | ESP32C3
| |
| − | | https://note.com/solder_state/n/n950ed088c3cb
| |
| − | |-
| |
| − | | No.55 V2164 Dual VCA
| |
| − | | 6
| |
| − | | 6
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nd82c027d0597
| |
| − | |-
| |
| − | | No.54 PT2399 clock sync delay
| |
| − | | 4
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/nf6dc0a61e26d
| |
| − | |-
| |
| − | | No.52 Reverse step sequencer
| |
| − | | 4
| |
| − | | 8
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | CDT7350
| |
| − | | https://note.com/solder_state/n/n13c49f08ca1f
| |
| − | |-
| |
| − | | No.50 LFO/VCO rebuild
| |
| − | | 2
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/AD9833
| |
| − | | https://note.com/solder_state/n/nd2c22a73e8fe
| |
| − | |-
| |
| − | | No.49 Clock Divider
| |
| − | | 11
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | TC4040BP
| |
| − | | https://note.com/solder_state/n/n7979cda44dcb
| |
| − | |-
| |
| − | | No. 47 Sample & hold
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | LF398
| |
| − | | https://note.com/solder_state/n/n29b52f4f01f1
| |
| − | |-
| |
| − | | No.46 Dual Envelope generator
| |
| − | | 4
| |
| − | | 8
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n6fb73eb1d8b8
| |
| − | |-
| |
| − | | No.45 Diode clip Distortion
| |
| − | | 2
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n5f35e2e84a3e
| |
| − | |-
| |
| − | | No.44 Wave shaper & VCA
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nfdc2e198255a
| |
| − | |-
| |
| − | | No.43 Envelope Follower
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n110e9ba066b3
| |
| − | |-
| |
| − | | No.42 PCM drum
| |
| − | | 6
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NSX-1/SAMD
| |
| − | | https://note.com/solder_state/n/neabe7e014c11
| |
| − | |-
| |
| − | | No.40 Voltage controlled switch
| |
| − | | 8
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NJU211
| |
| − | | https://note.com/solder_state/n/n98883e71f814
| |
| − | |-
| |
| − | | No.39 Diode ladder VCF
| |
| − | | 3
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n598f23105ec4
| |
| − | |-
| |
| − | | No.38 Touch controller
| |
| − | | 5
| |
| − | | 1
| |
| − | | 1
| |
| − | | 4*
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MPR121
| |
| − | | https://note.com/solder_state/n/ncd42925f726b
| |
| − | |-
| |
| − | | No.37 Overflow folding VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XIAO
| |
| − | | https://note.com/solder_state/n/nf01e7c92b010
| |
| − | |-
| |
| − | | No.36 LM13700 Dual VCA
| |
| − | | 6
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | LM13700
| |
| − | | https://note.com/solder_state/n/n3357199504d8
| |
| − | |-
| |
| − | | No.35 CV to MIDI
| |
| − | | 6
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/nb618127f37c9
| |
| − | |-
| |
| − | | No.33 Dual Quantizer
| |
| − | | 7
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/nb8b9a2f212a2
| |
| − | |-
| |
| − | | No.32 Spin FV-1 multi FX
| |
| − | | 5
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/FV-1
| |
| − | | https://note.com/solder_state/n/n1c402a78a0fe
| |
| − | |-
| |
| − | | No.31 Ring modulator & wavefold
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | AD633
| |
| − | | https://note.com/solder_state/n/n9d138d74b39d
| |
| − | |-
| |
| − | | No.30 Euclidean rhythm sequencer
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n433b32ea6dbc
| |
| − | |-
| |
| − | | No.29 SH-101 type sequencer
| |
| − | | 7
| |
| − | | 1 TRIM
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/n80f4baf81226
| |
| − | |-
| |
| − | | No.28 DSP multi effector
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | DSP
| |
| − | | https://note.com/solder_state/n/nd9c984a9ab7a
| |
| − | |-
| |
| − | | No.27 5ch mixer
| |
| − | | 6
| |
| − | | 6
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nffc1a33053be
| |
| − | |-
| |
| − | | No.26 V2044 VCF
| |
| − | | 3
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | V2044 VCF
| |
| − | | https://note.com/solder_state/n/n0fabdc23fe1e
| |
| − | |-
| |
| − | | No.25 Oscillo scope & Spectrum analyzer
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n6b4cc8d1c6b9
| |
| − | |-
| |
| − | | No.24 V2164 Dual VCA
| |
| − | | 6
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | V2164
| |
| − | | https://note.com/solder_state/n/n14a8be5f7118
| |
| − | |-
| |
| − | | No.23 CHORD VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n681d2e07e324
| |
| − | |-
| |
| − | | No.22 Additive VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n30b3a8737b1e
| |
| − | |-
| |
| − | | No.20 CV/GATE 8step sequencer
| |
| − | | 3
| |
| − | | 8
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | CD4022BE /NE555
| |
| − | | https://note.com/solder_state/n/n4da93d157f26
| |
| − | |-
| |
| − | | No.19 FM VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n88317851a4c7
| |
| − | |-
| |
| − | | No.18 2OSC VCO
| |
| − | | 3
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n71c67b5aaeca
| |
| − | |-
| |
| − | | No.17 Multi mode Envelope generator
| |
| − | | 2
| |
| − | | 4
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n69643b792274
| |
| − | |-
| |
| − | | No.16 CV/Gate sequencer & Arpeggiator
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n7c2809976698
| |
| − | |-
| |
| − | | No.15 TR-808/909 sample player drum
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/n0209d16d0d08
| |
| − | |-
| |
| − | | No.14 KICK
| |
| − | | 3
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/ne33e32660d50
| |
| − | |-
| |
| − | | No.13 Noise & Hi-hat
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/nf65437f12790
| |
| − | |-
| |
| − | | No.12 Clock SYNC LFO
| |
| − | | 2
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n4c600f2431c3
| |
| − | |-
| |
| − | | No.11 MIDI to CV
| |
| − | | 4
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n17e028497eba
| |
| − | |-
| |
| − | | No.10 Gate Burst/Delay
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n28b5c43229af
| |
| − | |-
| |
| − | | No.9 6ch trigger sequencer
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n17c69afd484d
| |
| − | |-
| |
| − | | No.8 SX150 VCF
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MCP4726
| |
| − | | https://note.com/solder_state/n/n5136d98930a8
| |
| − | |-
| |
| − | | No.7 Quantizer
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/MCP4726
| |
| − | | https://note.com/solder_state/n/nde97a0516f03
| |
| − | |-
| |
| − | | No.6 Clock multi divide
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n8907f2f6e8f5
| |
| − | |-
| |
| − | | No.5 Generative sequencer
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MCP4911
| |
| − | | https://note.com/solder_state/n/n8a489f0b857a
| |
| − | |-
| |
| − | | No.4 samplar
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/TF PLAYER
| |
| − | | https://note.com/solder_state/n/n6057a5256042
| |
| − | |-
| |
| − | |}
| |
| − | | |
| − | == Videos ==
| |
| − | | |
| − | * Hooking together modules
| |
| − | | |
| − | <video type="youtube">J0iUN2B4aBQ</video>
| |
| − | | |
| − | <video type="youtube">UOQezMJ560o</video>
| |
