Difference between revisions of "TinySA"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 21: | Line 21: | ||
* Built | * Built | ||
** Standard 10% resistor values | ** Standard 10% resistor values | ||
| − | ** R2 = 2 paralleled 120 Ohm 1/4W resistors paralleled with 820 ohms | + | ** R2 = 2 paralleled 120 Ohm 1/4W resistors paralleled with 470 ohms = 53.2 ohms |
| + | ** R1 = 820 in parallel with 22K = 790.6 ohms | ||
| + | ** Flat from 0-30 MHz | ||
** Measured -29.6dB | ** Measured -29.6dB | ||
| − | |||
** 53.4 ohms | ** 53.4 ohms | ||
Revision as of 00:31, 6 September 2021
TinySA - Spectrum Analyzer
- Maximum input level
- 0 dBm = 1 mW
- dBm = 10*LOG(milliwatts)
- -10 dBm = 0.1 mW
- +10dBm = 10 mW
- +20dBm = 1000 mW
- 3.3V at 50 Ohm = 0.2178W
- 217.8 mW = 23.4 dBm
- tinySA wiki
Attenuators
30 dBm Attenuator
- Built
- Standard 10% resistor values
- R2 = 2 paralleled 120 Ohm 1/4W resistors paralleled with 470 ohms = 53.2 ohms
- R1 = 820 in parallel with 22K = 790.6 ohms
- Flat from 0-30 MHz
- Measured -29.6dB
- 53.4 ohms
Videos
