Difference between revisions of "SWLEDX8"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[File:SWLEDX8-I2C- | + | [[File:SWLEDX8-I2C-P119-Orth-720px_2.jpg]] |
| + | |||
| + | <video type="youtube">Eh4sLUga6aM</video> | ||
== Features == | == Features == | ||
| + | |||
| + | This card provides a very easy way to mount switches and/or LEDs in an enclosure. | ||
* (8) LEDs | * (8) LEDs | ||
* (8) Slide Switches | * (8) Slide Switches | ||
| − | * 0.1" pitch connector | + | * 2x10 pin connector |
| − | + | ** 0.1" pitch connector | |
* 59mmx38mm | * 59mmx38mm | ||
* (4) #4-40 mounting holes | * (4) #4-40 mounting holes | ||
| − | * | + | * Optional part of a two-card system with [[SWLEDX8-I2C]] |
| + | |||
| + | == Build Options == | ||
| + | |||
| + | * P1 header can be in installed on the front or rear of the car | ||
| + | * P1 header can be right angle or straight | ||
| + | |||
| + | == P1 right angle mounted on rear == | ||
| + | |||
| + | [[file:SWLEDX8_Rev2_Front_(Right)_3D.png]] | ||
| + | |||
| + | [[file:SWLEDX8_Rev2_Rear_(Right)_3D.png]] | ||
| + | |||
| + | == P1 straight mounted on rear == | ||
| + | |||
| + | * Useful when stacked above [[SWLEDX8-I2C]] card | ||
| + | ** Only need 1 header if soldering directly to both boards | ||
| + | |||
| + | [[file:SWLEDX8_Rev2_Front_(Straight)_3D.png]] | ||
| + | |||
| + | [[file:SWLEDX8_Rev2_Straight_3D.png]] | ||
== Connector == | == Connector == | ||
| − | Connector | + | * Connector can be mounted on the rear side of the card to connect to [[SWLEDX8-I2C]] |
| + | |||
| + | * S0-S7 - Switches | ||
| + | * L0-L7 = LEDs | ||
| + | |||
| + | [[file:SWLEDX8_J1.PNG]] | ||
| + | |||
| + | == Mechanicals == | ||
| + | |||
| + | [[File:SW8LED-Rev2_MECHS.png]] | ||
| + | |||
| + | == Example Applications == | ||
| + | |||
| + | The corner mounting holes make the card easy to use. Here's some applications using the card. | ||
| + | |||
| + | === Z80-MBC2 - LEDs Application === | ||
| + | |||
| + | [[file:SWLEDX8_Application_Z80-MBC2.PNG]] | ||
| + | |||
| + | === MultiComp in a Box - Switches Application === | ||
| − | + | [[file:SWLEDX8_Application_MultiCompInABox.PNG]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | + | == Assembly Sheet == |
| − | [[ | + | * [[SW8LED Assembly Sheet Rev2]] |
Latest revision as of 18:37, 3 June 2022
Contents
Features
This card provides a very easy way to mount switches and/or LEDs in an enclosure.
- (8) LEDs
- (8) Slide Switches
- 2x10 pin connector
- 0.1" pitch connector
- 59mmx38mm
- (4) #4-40 mounting holes
- Optional part of a two-card system with SWLEDX8-I2C
Build Options
- P1 header can be in installed on the front or rear of the car
- P1 header can be right angle or straight
P1 right angle mounted on rear
_3D.png)
_3D.png)
P1 straight mounted on rear
- Useful when stacked above SWLEDX8-I2C card
- Only need 1 header if soldering directly to both boards
_3D.png)
Connector
- Connector can be mounted on the rear side of the card to connect to SWLEDX8-I2C
- S0-S7 - Switches
- L0-L7 = LEDs
Mechanicals
Example Applications
The corner mounting holes make the card easy to use. Here's some applications using the card.
Z80-MBC2 - LEDs Application
MultiComp in a Box - Switches Application
