Difference between revisions of "Extend IOP16 minimal example"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
= Overview = | = Overview = | ||
| − | * This is a guide to extending the IOP16 | + | * This is a guide to extending the IOP16 by adding IOP16 Peripherals to the minimal design |
| − | |||
* This guide requires general familiarity with [[IOP16_16-bit_I/O_CPU_Design|IOP16 16-bit I/O CPU Design]] | * This guide requires general familiarity with [[IOP16_16-bit_I/O_CPU_Design|IOP16 16-bit I/O CPU Design]] | ||
| + | |||
| + | = Baseline Design = | ||
| + | |||
* Start with [https://github.com/douggilliland/IOP16/tree/main/Higher_Level_Examples/TestIOP16_Minimal a good minimal example] | * Start with [https://github.com/douggilliland/IOP16/tree/main/Higher_Level_Examples/TestIOP16_Minimal a good minimal example] | ||
** Similar to Arduino "Blink Sketch" and uses | ** Similar to Arduino "Blink Sketch" and uses | ||
*** Timer Unit 0 1 second timer | *** Timer Unit 0 1 second timer | ||
*** On-board LED | *** On-board LED | ||
Revision as of 09:43, 11 April 2022
Overview
- This is a guide to extending the IOP16 by adding IOP16 Peripherals to the minimal design
- This guide requires general familiarity with IOP16 16-bit I/O CPU Design
Baseline Design
- Start with a good minimal example
- Similar to Arduino "Blink Sketch" and uses
- Timer Unit 0 1 second timer
- On-board LED
- Similar to Arduino "Blink Sketch" and uses
