Difference between revisions of "DCE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 5: | Line 5: | ||
[[File:DTE_DCE.png]] | [[File:DTE_DCE.png]] | ||
| + | |||
| + | == DTE (reference) == | ||
* The [[DTE]] (PC) has the male connector | * The [[DTE]] (PC) has the male connector | ||
Revision as of 16:22, 22 February 2020
DCE - RS-232 to TTL
- RS-232 to TTL converter
- The DCE (peripheral) has the female.
DTE (reference)
- The DTE (PC) has the male connector
Pin SIG. Signal Name DTE (PC) 1 DCD Data Carrier Detect in 2 RXD Receive Data in 3 TXD Transmit Data out 4 DTR Data Terminal Ready out 5 GND Signal Ground - 6 DSR Data Set Ready in 7 RTS Request to Send out 8 CTS Clear to Send in 9 RI Ring Indicator in
H1
- Signal referenced to H1 connector
- GND
- RTS (out)
- VCC
- RX (in)
- Tx (out)
- CTS (in)
