Difference between revisions of "TinySA"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 24: | Line 24: | ||
** R1 = 820 in parallel with 22K = 790.6 ohms | ** R1 = 820 in parallel with 22K = 790.6 ohms | ||
** Flat from 0-30 MHz | ** Flat from 0-30 MHz | ||
| − | ** Measured - | + | ** Measured attenuation is flat |
| − | ** 53. | + | *** -30.01dB at 1 MHz |
| + | *** -30.24dB at 30 MHz | ||
| + | ** 53.1 ohms, 21.3nF | ||
| + | ** SWR 1.06 | ||
** 1/2W max | ** 1/2W max | ||
Revision as of 01:07, 6 September 2021
TinySA - Spectrum Analyzer
- Maximum input level
- 0 dBm = 1 mW
- dBm = 10*LOG(milliwatts)
- -10 dBm = 0.1 mW
- +10dBm = 10 mW
- +20dBm = 1000 mW
- 3.3V at 50 Ohm = 0.2178W
- 217.8 mW = 23.4 dBm
- tinySA wiki
Attenuators
30 dBm Attenuator
- Built
- Standard 5% resistor values
- R2 = 2 paralleled 120 Ohm 1/4W resistors paralleled with 470 ohms = 53.2 ohms
- R1 = 820 in parallel with 22K = 790.6 ohms
- Flat from 0-30 MHz
- Measured attenuation is flat
- -30.01dB at 1 MHz
- -30.24dB at 30 MHz
- 53.1 ohms, 21.3nF
- SWR 1.06
- 1/2W max
Videos
