Difference between revisions of "SWLEDX8"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 25: | Line 25: | ||
== P1 straight mounted on rear == | == P1 straight mounted on rear == | ||
| + | |||
| + | * Useful when stacked above [[SWLEDX8-I2C]] card | ||
| + | ** Only need 1 header if soldering directly to both boards | ||
[[file:SWLEDX8_Rev2_Front_(Straight)_3D.png]] | [[file:SWLEDX8_Rev2_Front_(Straight)_3D.png]] | ||
Revision as of 12:35, 25 May 2022
Contents
Features
This card provides a very easy way to mount switches and/or LEDs in an enclosure.
- (8) LEDs
- (8) Slide Switches
- 2x10 pin connector
- 0.1" pitch connector
- 59mmx38mm
- (4) #4-40 mounting holes
- Optional part of a two-card system with SWLEDX8-I2C
Build Options
- P1 header can be in installed on the front or rear of the car
- P1 header can be right angle or straight
P1 right angle mounted on rear
_3D.png)
_3D.png)
P1 straight mounted on rear
- Useful when stacked above SWLEDX8-I2C card
- Only need 1 header if soldering directly to both boards
_3D.png)
Connector
- Connector can be mounted on the rear side of the card to connect to SWLEDX8-I2C
- S0-S7 - Switches
- L0-L7 = LEDs
Mechanicals
Example Applications
The corner mounting holes make the card easy to use. Here's some applications using the card.
Z80-MBC2 - LEDs Application
MultiComp in a Box - Switches Application
