Difference between revisions of "TinyGrid85"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | [[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/attiny85-board-with-prototyping-area-tinygrid85/]] | ||
| + | |||
[[File:TinyGrid85-GVS-640px.JPG]] | [[File:TinyGrid85-GVS-640px.JPG]] | ||
Revision as of 23:32, 29 December 2019
Features
- ATMEL ATTiny85 Microprocessor (or compatible 8-pin part)
- Arduino Compatible (works with Arduino bootloader and Arduino IDE)
- Prototyping area with power/ground connections
- Brings out all 5 I/O and reset lines to grid columns
- Laid out like a breadboard with vertically connected traces.
- Power and Ground horizontal connections though all columns
- Labeled (with letters/numbers) for easy documentation
- H1 - Install jumper to select regulator or remove for ISP +5V
- H2 - 6-pin ISP Download Header
- 5V Power Regulator with generous area under the regulator for heat dissipation
- 2.1mm Connector for AC/DC adapter 7-9V input
- (4) 4-40 or M3 screw holes for solid mounting
- 49x49 mm board
