Difference between revisions of "DCE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 16: | Line 16: | ||
# Tx (out) | # Tx (out) | ||
# CTS (in) | # CTS (in) | ||
| + | |||
| + | == DTE (reference) == | ||
| + | |||
| + | * The [[DTE]] (PC) has the male connector | ||
| + | |||
| + | <pre> | ||
| + | Pin SIG. Signal Name DTE (PC) | ||
| + | 1 DCD Data Carrier Detect in | ||
| + | 2 RXD Receive Data in | ||
| + | 3 TXD Transmit Data out | ||
| + | 4 DTR Data Terminal Ready out | ||
| + | 5 GND Signal Ground - | ||
| + | 6 DSR Data Set Ready in | ||
| + | 7 RTS Request to Send out | ||
| + | 8 CTS Clear to Send in | ||
| + | 9 RI Ring Indicator in | ||
| + | </pre> | ||
== DCE Assembly Sheet == | == DCE Assembly Sheet == | ||
* [[DCE Assembly Sheet]] | * [[DCE Assembly Sheet]] | ||
Revision as of 16:24, 22 February 2020
DCE - RS-232 to TTL
- RS-232 to TTL converter
- The DCE (peripheral) has the female.
H1 Connector
- Signal referenced to H1 connector
- GND
- RTS (out)
- VCC
- RX (in)
- Tx (out)
- CTS (in)
DTE (reference)
- The DTE (PC) has the male connector
Pin SIG. Signal Name DTE (PC) 1 DCD Data Carrier Detect in 2 RXD Receive Data in 3 TXD Transmit Data out 4 DTR Data Terminal Ready out 5 GND Signal Ground - 6 DSR Data Set Ready in 7 RTS Request to Send out 8 CTS Clear to Send in 9 RI Ring Indicator in
