SWLEDX8

Features

This card provides a very easy way to mount switches and/or LEDs in an enclosure.

• (8) LEDs
• (8) Slide Switches
• 2x10 pin connector
  • 0.1" pitch connector
• 59mmx38mm
• (4) #4-40 mounting holes
• Optional part of a two-card system with SWLEDX8-I2C

Build Options

• P1 header can be in installed on the front or rear of the car
• P1 header can be right angle or straight

P1 right angle mounted on rear

P1 straight mounted on rear

• Useful when stacked above SWLEDX8-I2C card
  • Only need 1 header if soldering directly to both boards

Connector

• Connector can be mounted on the rear side of the card to connect to SWLEDX8-I2C

• S0-S7 - Switches
• L0-L7 = LEDs

Mechanicals

Example Applications

The corner mounting holes make the card easy to use. Here's some applications using the card.

Z80-MBC2 - LEDs Application

MultiComp in a Box - Switches Application

Assembly Sheet

• SW8LED Assembly Sheet Rev2