EP2C5-DB
Contents
EP2C5-DB FPGA card
I love Grant Searle's Multicomp project. It lets you easily create 6502, Z80, 6809 Retrocomputers of the late 1970s era. This card provides all of the connections needed.
Grant's original design used an EP2 and that's exactly what this cards USES. Note that's not compatible with the latest version Altera/Intel Quartus but you can download older versions like 13.1 SP. Just make sure it supports the Cyclone II family of FPGAs. We also have an EP4 version of this card for sale on Tindie.
Features
- Cyclone II EP2C5 Mini Dev Board
- EP2C5T144C8N FPGA Card - Ebay listing
- 6 bit video on VGA (2:2:2 R:G:B)
- 128KB of SRAM for banked use in CP/M
- PS/2 Keyboard Mini-DIN connector
- Connector for serial ports
- Can attach inexpensive FTDI USB to serial converter
- SD Card
- DC power jack (on FPGA card)
EP2 Resources
- EP2CE5 had 13 of 1Kx9 SRAM blocks
Stackup with FTDI Card
VGA - Ideal Drive 2:2:2 Case
- FPGA has a 3.3V driver which can drive 8 mA
- Ideal case drive current
- 0.7V into 75 Ohms = 9.33 mA
- R-2R values
- Ideal resistor values are 417.9 ohms and 835.7 ohms
- Standard value 1% resistors
- 1% standard values are 422 (Mouser), 845 (Mouser) Ohms
- Get closest values
- 0V, 0.228V, 0.460V, 0.693V
- Voltage steps are:
- Current steps are:
Connectors
J1 - VGA
J4 - SD Card
J5 - Serial Ports 1/2
- Connects to FTDI Module
- RTS
- RXD
- TXD
- GND
FTDI Module
FTDI Wiring
- J5-1 (marked RTS on PCB) to FTDI CTS pin
- J5-3 (marked RX on PCB) to FTDI TX pin
- J5-5 (marked TX on PCB) to FTDI RX pin
- J5-7 (marked GND on PCB) to FTDI GND pin
J6 - 8-bit I/O connector
- FPGA Pins
- 3.3V
- 3.3V
- 25
- 31
- 41
- 40
- 43
- 42
- 45
- 44
- GND
- GND
J8 - 8-bit I/O connector
- FPGA Pins
- 3.3V
- 3.3V
- 48
- 47
- 52
- 51
- 58
- 55
- 76
- 69
- GND
- GND
Schematics
Multicomp Builds
Programming the Flash PROM Memory
Permanent (.pof file)
Temporary (.sof file)
Pin List (Multicomp)
set_global_assignment -name FAMILY "Cyclone IV E" set_global_assignment -name DEVICE EP4CE10E22C8 set_global_assignment -name TOP_LEVEL_ENTITY Microcomputer set_global_assignment -name ORIGINAL_QUARTUS_VERSION "13.0 SP1" set_global_assignment -name PROJECT_CREATION_TIME_DATE "17:55:48 OCTOBER 20, 2013" set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0 set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85 set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144 set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8 set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL" # Clocks and reset set_location_assignment PIN_17 -to clk set_location_assignment PIN_144 -to n_reset set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset # PS/2 set_location_assignment PIN_87 -to ps2Data set_location_assignment PIN_86 -to ps2Clk # ACIA (Serial) set_location_assignment PIN_60 -to serSelect set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to serSelect set_location_assignment PIN_104 -to urts1 set_location_assignment PIN_101 -to urxd1 set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rxd1 set_location_assignment PIN_103 -to utxd1 # External SRAM set_location_assignment PIN_4 -to n_sRamWE set_location_assignment PIN_126 -to n_sRamCS set_location_assignment PIN_134 -to n_sRamOE set_location_assignment PIN_32 -to sramAddress[16] set_location_assignment PIN_8 -to sramAddress[15] set_location_assignment PIN_30 -to sramAddress[14] set_location_assignment PIN_24 -to sramAddress[13] set_location_assignment PIN_28 -to sramAddress[12] set_location_assignment PIN_136 -to sramAddress[11] set_location_assignment PIN_132 -to sramAddress[10] set_location_assignment PIN_139 -to sramAddress[9] set_location_assignment PIN_142 -to sramAddress[8] set_location_assignment PIN_143 -to sramAddress[7] set_location_assignment PIN_141 -to sramAddress[6] set_location_assignment PIN_137 -to sramAddress[5] set_location_assignment PIN_135 -to sramAddress[4] set_location_assignment PIN_133 -to sramAddress[3] set_location_assignment PIN_129 -to sramAddress[2] set_location_assignment PIN_125 -to sramAddress[1] set_location_assignment PIN_121 -to sramAddress[0] set_location_assignment PIN_122 -to sramData[7] set_location_assignment PIN_120 -to sramData[6] set_location_assignment PIN_118 -to sramData[5] set_location_assignment PIN_114 -to sramData[4] set_location_assignment PIN_112 -to sramData[3] set_location_assignment PIN_113 -to sramData[2] set_location_assignment PIN_115 -to sramData[1] set_location_assignment PIN_119 -to sramData[0] # Composite Video set_location_assignment PIN_75 -to video set_location_assignment PIN_74 -to videoSync # VGA set_location_assignment PIN_64 -to videoB0 set_location_assignment PIN_63 -to videoB1 set_location_assignment PIN_67 -to videoG0 set_location_assignment PIN_65 -to videoG1 set_location_assignment PIN_70 -to videoR0 set_location_assignment PIN_69 -to videoR1 set_location_assignment PIN_71 -to hSync set_location_assignment PIN_72 -to vSync # SD Card set_location_assignment PIN_92 -to sdMISO set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdMISO set_location_assignment PIN_94 -to sdSCLK set_location_assignment PIN_93 -to sdMOSI set_location_assignment PIN_97 -to sdCS set_location_assignment PIN_3 -to driveLED # LED set_location_assignment PIN_E4 -to driveLED # J6 IO set_location_assignment PIN_25 -to J6IO8[0] set_location_assignment PIN_31 -to J6IO8[1] set_location_assignment PIN_41 -to J6IO8[2] set_location_assignment PIN_40 -to J6IO8[3] set_location_assignment PIN_43 -to J6IO8[4] set_location_assignment PIN_42 -to J6IO8[5] set_location_assignment PIN_45 -to J6IO8[6] set_location_assignment PIN_44 -to J6IO8[7] # J8 I/O set_location_assignment PIN_48 -to J8IO8[0] set_location_assignment PIN_47 -to J8IO8[1] set_location_assignment PIN_52 -to J8IO8[2] set_location_assignment PIN_51 -to J8IO8[3] set_location_assignment PIN_58 -to J8IO8[4] set_location_assignment PIN_55 -to J8IO8[5] set_location_assignment PIN_76 -to J8IO8[6] # set_location_assignment PIN_60 -to J8IO8[7]
