Difference between revisions of "DRIVE50"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 6: | Line 6: | ||
* 3.3V or 5V | * 3.3V or 5V | ||
* 3-pin right angle 0.1" pitch input connector | * 3-pin right angle 0.1" pitch input connector | ||
| + | |||
| + | == Test == | ||
| + | |||
| + | * Supply Vcc 3.3V to 5V and ground | ||
| + | * Input is pulled up to Vcc | ||
| + | * Use 50 Ohm terminator | ||
| + | * Measure output with BNC T | ||
| + | ** Should be 1/2 of Vcc | ||
Revision as of 14:37, 6 July 2022
50 Ohm Driver Card
- BNC or SMA connector
- 3.3V or 5V
- 3-pin right angle 0.1" pitch input connector
Test
- Supply Vcc 3.3V to 5V and ground
- Input is pulled up to Vcc
- Use 50 Ohm terminator
- Measure output with BNC T
- Should be 1/2 of Vcc
