ER-CV-AMP3

From Land Boards Wiki
Revision as of 13:32, 28 December 2022 by Blwikiadmin (talk | contribs) (→‎Application)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

ER-PROTO-02-CV AMP P1080931-720px.jpg

Control Voltages Amplifier

  • Three in/outs
  • 5V in, 10V out
  • Built on ER-PROTO-02 card
  • 2x5 Power connector

Application

  • Erica Synths DIY Sequencer has 10V control signals in
  • HAGIWO (and many others) uses Arduino Nano(s) to create 5V control voltages
  • This card translates the GATE signal from 0-6V to 0-10V

Design

ER-PROTO-02-CTLS FRONT CAD.PNG

Analog circuitry

ER-PROTO-02-CV AMP-U1 Back 3D.png ER-PROTO-02-CV AMP-U1 Fromt 3D.png

  • RX resistors are on Controls Card

ER-CV-AMP3 U1.PNG

Jacks

ER-CV-AMP3 J29.PNG

Power Connector / U1 Power

ER-PROTO-02-DB REAR PWR.png

  • 2x5 box connector

ER-CV-AMP3 J9.PNG

Build

ER-PROTO-02-DB REAR PWR.png

ER-PROTO-02-CV AMP P1080933-720px.jpg

Retrieved from "http://land-boards.com/blwiki/index.php?title=ER-CV-AMP3&oldid=23064"