Difference between revisions of "SMA-HDRS"

From Land Boards Wiki
Jump to navigation Jump to search
(Created page with "== SMA to Headers adapter == * Match QTP-Labs or Kits and Parts headers to SMA connector ** QRP-Labs 4 pin SSGG pinout ** Kits and Parts SFS pinout")
 
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[file:SMA-HDRS-3D.png]]
 +
 
== SMA to Headers adapter ==
 
== SMA to Headers adapter ==
  
* Match QTP-Labs or Kits and Parts headers to SMA connector
+
* Match QRP-Labs or Kits and Parts headers to SMA connector
 
** QRP-Labs 4 pin SSGG pinout
 
** QRP-Labs 4 pin SSGG pinout
 
** Kits and Parts SFS pinout
 
** Kits and Parts SFS pinout
 +
* Use Male or Female SMA
 +
* Use male pins or female headers
 +
* Unused header could be used as test point access
 +
 +
== QRP Labs ==
 +
 +
* Useful to test QRP-Labs [https://www.qrp-labs.com/bpfkit.html Bandpass] and [https://www.qrp-labs.com/lpfkit.html Low-Pass] filters
 +
* Note Left vs right side orientations
 +
 +
[[file:QRP-Labs_Filter.PNG]]
 +
 +
== Kits and Parts ==
 +
 +
* Symmetric - signal on center pin, ground on outside pins
 +
 +
[[file:K&P_Pins.PNG]]

Latest revision as of 10:50, 11 November 2021

SMA-HDRS-3D.png

SMA to Headers adapter

  • Match QRP-Labs or Kits and Parts headers to SMA connector
    • QRP-Labs 4 pin SSGG pinout
    • Kits and Parts SFS pinout
  • Use Male or Female SMA
  • Use male pins or female headers
  • Unused header could be used as test point access

QRP Labs

  • Useful to test QRP-Labs Bandpass and Low-Pass filters
  • Note Left vs right side orientations

QRP-Labs Filter.PNG

Kits and Parts

  • Symmetric - signal on center pin, ground on outside pins

K&P Pins.PNG