Editing ESP32-VGA

Jump to navigation Jump to search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision Your text
Line 110: Line 110:
 
# VP/I36
 
# VP/I36
  
== Connectors ==
+
== Connectors (Revs 2, 3 boards) ==
  
=== P1 - PS/2 Mouse ===
+
=== P1 - PS/2 Mouse - Revs 2, 3 ===
  
 
* DIN 6 connector
 
* DIN 6 connector
Line 122: Line 122:
 
</pre>
 
</pre>
  
=== P2 - PS/2 Keyboard ===
+
=== P2 - PS/2 Keyboard - Revs 2, 3 ===
  
 
* Purple DIN 6 connector
 
* Purple DIN 6 connector
Line 132: Line 132:
 
</pre>
 
</pre>
  
=== P3 - VGA ===
+
=== P3 - VGA - Revs 2, 3 ===
  
 
* ESP32 pins
 
* ESP32 pins
Line 147: Line 147:
 
</pre>
 
</pre>
  
=== P4 - Audio Out - RCA Jack ===
+
=== P4 - Audio Out - RCA Jack - Revs 2, 3 ===
  
 
* ESP32 pins
 
* ESP32 pins
Line 155: Line 155:
 
</pre>
 
</pre>
  
=== J1 - 5V Power ===
+
=== J1 - 5V Power - Revs 2, 3 ===
  
 
* Center +5V
 
* Center +5V
  
=== J2 - FTDI #1 ===
+
=== J2 - FTDI #1 - Revs 2, 3 ===
  
 
* This interface is in common with the USB-to-Serial interface on the ESP32 module
 
* This interface is in common with the USB-to-Serial interface on the ESP32 module
Line 176: Line 176:
 
</pre>
 
</pre>
  
==== Connect to FTDI card ====
+
==== Connect to FTDI card - Rev 2 ====
  
 
* Set FTDI jumper to 3.3V
 
* Set FTDI jumper to 3.3V
Line 182: Line 182:
 
[[File:FTDI_rot.jpg]]
 
[[File:FTDI_rot.jpg]]
  
=== J3 - FTDI #2 ===
+
=== J3 - FTDI #2 - Rev 2 ===
  
 
* Most recent (2020-02) ANSI terminal uses pin 34 for Rx
 
* Most recent (2020-02) ANSI terminal uses pin 34 for Rx
Line 199: Line 199:
 
</pre>
 
</pre>
  
==== Connect to FTDI card ====
+
==== Connect to FTDI card - Rev 2  ====
  
 
* Set FTDI jumper to 3.3V (image below shows jumper set to 5V which is wrong)
 
* Set FTDI jumper to 3.3V (image below shows jumper set to 5V which is wrong)
Line 205: Line 205:
 
[[File:FTDI_rot.jpg]]
 
[[File:FTDI_rot.jpg]]
  
=== J3 - FTDI #2 ===
+
=== J3 - FTDI #2 - Rev 3 ===
  
 
* Most recent (as of 2020-02) ANSI terminal uses pin 34 for Rx
 
* Most recent (as of 2020-02) ANSI terminal uses pin 34 for Rx
Line 222: Line 222:
 
</pre>
 
</pre>
  
=== J4 - SD Card ===
+
=== J4 - SD Card - Revs 2, 3 ===
  
 
* Brought to GVS header pins (Rev 1)
 
* Brought to GVS header pins (Rev 1)

Please note that all contributions to Land Boards Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Land Boards Wiki:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)