Difference between revisions of "I2C-RPT-08"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 39: | Line 39: | ||
* [[Arduino Based Test Station]] | * [[Arduino Based Test Station]] | ||
* Connects directly to I2C port on the [[BLUE-PILL-HUB]] | * Connects directly to I2C port on the [[BLUE-PILL-HUB]] | ||
+ | ** 9600 baud, no hardware handshake | ||
** I2C address offset = 0x0 | ** I2C address offset = 0x0 | ||
** [[BLUE-PILL-HUB]] is set to offset=0x1 so it does not conflict | ** [[BLUE-PILL-HUB]] is set to offset=0x1 so it does not conflict |
Revision as of 12:03, 1 August 2020
Features
- I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer
- PCA9548A
- Eight I2C Ports
- 100KHz/400KHz operation
- Host port
- Controlled via I2C
- 3.3V or 5V host operation
- 3.3V or 5V slave ports operation
- Voltage translation between the ports
- Ex: a Raspberry PI which runs 3.3V can control I2C devices which run at 5V
- On-board termination resistors
- 49x49mm form factor
- 4 solid 4-40 mounting holes
- Arduino Based Test Station
- Connects directly to I2C port on the Blue Pill Hub
- I2C address offset = 0x0
- Blue Pill Hub is set to offset=0x1 so it does not conflict
- Uses 8x of I2CIO-8 cards
- ODAS Tester Github Repo
Schematic
Drivers/Example Code
- Github repo - Driver code
- Github repo - Example code
Testing
- Arduino Based Test Station
- Connects directly to I2C port on the BLUE-PILL-HUB
- 9600 baud, no hardware handshake
- I2C address offset = 0x0
- BLUE-PILL-HUB is set to offset=0x1 so it does not conflict
- Uses 8x of I2CIO-8 cards
- ODAS Tester Github Repo
Issues
- Silkscreen shows SCK, should be SCL