Difference between revisions of "Main Page"
Blwikiadmin2 (talk | contribs) (→FPGA Adapter Cards) |
Blwikiadmin2 (talk | contribs) (→I/O Cards) |
||
Line 134: | Line 134: | ||
* [[SPI-POTX2]] - I2C Dual potentiometer | * [[SPI-POTX2]] - I2C Dual potentiometer | ||
* [[SIOProc-01]] - Serial I/O Processor | * [[SIOProc-01]] - Serial I/O Processor | ||
+ | * [[DCE RS-232-to-TTL]] | ||
+ | * [[DTE RS-232-to-TTL]] | ||
== Open Data Acquisition System (ODAS) == | == Open Data Acquisition System (ODAS) == |
Revision as of 16:36, 8 September 2019
Contents
- 1 Arduino Compatible
- 2 Arduino Tinys
- 3 Analog/Audio
- 4 Beaglebone Capes
- 5 Digital to Analog
- 6 Edison cards
- 7 FPGA Adapter Cards
- 8 GVS Sensors
- 9 Ham Radio
- 10 I/O Cards
- 11 Open Data Acquisition System (ODAS)
- 12 Lights
- 13 Other Sensors
- 14 Power Cards
- 15 Prototyping
- 16 Raspberry Pi Boards
- 17 Test Equipment
- 18 X10
Arduino Compatible
All of our Arduino compatible boards have solid mounting holes and can be mounted in enclosures for real world applications.
- ATProgHead - AVR programming head (for use with the GVSDuino)
- GVSDuino - Arduino UNO compatible with GVS pins
- GVS-32U4 - Arduino Leonardo compatible with GVS pins
- MiniDuino - Arduino UNO compatible with convenient headers
- Screwduino - Arduino UNO compatible with easy to connect screw terminals
- FTDI-USB-TTL - USB interface for GVSDuino, MiniDuino. and Screwduino
- NANO-BKOUT - Arduino Nano Breakout Board
- UNO-DB25 - Arduino UNO mount board with DB-25 connector (ODAS compatible form factor)
- OPTOUSB - Opto-coupled USB to FTDI port
- BLUE-PILL-HUB - ATM32F1 Board with I2C Hub
Arduino Tinys
Our family of Arduino compatibles uses the 8-pin ATTiny85 for a compact and inexpensive solution.
- TinyDuino85 - ATTiny85 board
- TinyGrid85 - ATTiny85 board with generous breadboard area for quick prototyping
- Tiny85ISP - ATTiny85 ISP based Programmer board
Analog/Audio
- ANA-SIG-CON
- HVDigitalPot2
- HVDigitalPot2F
- RF-Amp (Not built yet)
- RF-Amp-1
- SPI-POTX2
These boards include audio building blocks and larger functions.
- AudioAmp384 - 5 W Audio Amplifier
- AudioAmp386 - 3/4 W Audio Amplifier
- IntegTheremin - Integrated Theremin
- XR-2206 - Exar Function Generator set up to do sine waves, works great with HVDigitalPot, HVDigitalPot2 or HVDigitalPot2F
Beaglebone Capes
Add 5V I/O to the BeagleBone Black.
- BBB-COMMS-2 - Beaglebone cape with Communications and I/O
- BBB-GVS - 5V GVS Beaglebone cape
- BBB-GVS-3 - GVS Beaglebone cape, Analog buffering
Digital to Analog
There are plenty of digital pots out there but few that let you run the wipers to voltages higher than 5V.
- HVDigitalPot - High Voltage Digital Pot (7-bits)
- HVDigitalPot2 - High Voltage Digital Pot (10-bits)
- HVDigitalPot2F - High Voltage Digital Pot Faster (10-bits)
Edison cards
- Eddie-01 - Edison GVS card
FPGA Adapter Cards
- EP2C5-DB - Grant Searle's Multi-Computer Daughtercard
- BASE-EP4CE6 - Cyclone IV FPGA Baseboard with pin headers
- RETRO-EP4CE6 - Retro-computing Baseboard
- EPXX-GVS - I/O Connectors for the A-CExx FPGA card (below)
Purchased FPGA Cards
- GitHub FPGA pages
- Cyclone II EP2C5 Mini Dev Board
- WaveShare CoreEP4CE6 EP4CE6E22C8N FPGA Board
- zrTech V2 EP4CE6 Cyclone IV FPGA EP4CE6E22C8N Development Board USB V2
- A-C4E6 Cyclone IV FPGA EP4CE6E22C8N Development Board
- A-C4E10 Cyclone IV FPGA EP4CE10E22C8N Development Board
- A-ESTF_V2_EP4CE22 Board
- DE0-Nano Board
GVS Sensors
We like sensors with GVS pinouts. They go well with our Arduino Compatible boards (GVSDuino, GVS-32U4, or TinyDuino85)
- DS18S20 - One Wire Temperature Sensor
- DS18S20-LDR - One Wire Temperature Sensor plus Light Dependent Resistor (LDR) Sensor
- GVS-Switch - Switch
- GVSUNI - Universal GVS Sensor card
- IR_Sensor - Infrared Sensor
- IRSens-2 - Infrared Sensor v2
- LDRSensor - Light Dependent Resistor (LDR)Sensor
- NewPot - Potentiometer
- NewPot2 - Potentiometer
- Sw5Way - A 5 way switch on a single analog input line
- Sw5-2 - A discrete 5 way switch on a single analog input line
Ham Radio
- ANTUNER - Antenna Tuner
- FM-NOTCH Filter
- Software Defined Radio (SDR)
I/O Cards
- BASE-EP4CE6 - Cyclone IV FPGA Baseboard
- DisplayProc-01 - Display Processor
- ESP-BKOUT - ESP8266 ESP-01 breakout card
- ESP-12E-01 - ESP8266 ESP-12E breakout card
- ESP32-HUB - ESP32 ESP32 I2C Hub breakout card
- EP2C5-DB - Grant Searle's Multi-Computer Daughtercard
- I2C16Bit - MCP23017 based small form factor card
- I2C8Bit - MCP23008 based small form factor card
- I2C-RPT - 4-channel I2C Repeater
- I2C-RPT-08 - 8-channel I2C Repeater
- I2C-TEMP - I2C Temperature sensor
- I2CIO-8 - I2C Digital I/O test/demo card
- I2CIO-8X - I2C Digital I/O test/demo card
- MyMenu - 5 way switch plus OLED for a standalone menu system
- One Wire Logger - Much more than just a sensor, it's a complete datalogger with display
- OptoSmall - 4 Channel Opto-Isolator card
- OptoFast - 4 Channel Opto-Isolator card with speed enhancement
- OptoFastBi - 4 Channel (Two in each direction) Opto-Isolator card
- OPTOFAST-2 - 4 Channel Opto-Isolator card with even better speed enhancement
- SIG-CON-01 - Signal Conditioner card
- SPI-POTX2 - I2C Dual potentiometer
- SIOProc-01 - Serial I/O Processor
- DCE RS-232-to-TTL
- DTE RS-232-to-TTL
Open Data Acquisition System (ODAS)
Documentation | Function | # I/O | In/Out | Opto Isolated | Connector |
---|---|---|---|---|---|
OptoIn8-I2C | Eight Channel Optically Isolated Input Card | 8 | In | Yes | DB-25 |
OptoOut8-I2C | Eight Channel Optically Isolated Output Card | 8 | Out | Yes | DB-25 |
DigIO16-I2C | 16 Channel Digital I/O Card with I2C bus | 16 | I/O | No | DB-25 |
DIGIO-128 | 128 Channel Digital I/O Card with I2C bus | 128 | I/O | No | 0.1" Headers |
DAS-32U4 | Arduino compatible Processor Card | 20+ | I/O | No | GVS |
DIGIO32-I2C | 32-Bit Digio Card with DB-37 connector | 32 | I/O | No | DB-37 |
PROTO16-I2C | 16-Bit Digio Card with open logic area and DB-25 connector | 16 | I/O | No | DB-25 |
ODAS-PSOC5 | PSOC 5LP on ODAS hardware | 30+ | I/O | No | 0.1", 2x20 |
OPSOC-95MM-01 | PSOC 5LP on ODAS hardware | 30+ | I/O | No | 0.1", DB62 |
CARRIER95TO49MM | Card Carrier/Adapter | N/A | I/O | No | 0.1" |
ODAS-RELAY-16 | 16 Channel Relay Card | N/A | I/O | No | 0.1" |
BASE-EP4CE6 | FPGA Board | N/A | I/O | No | 0.1" |
BLUE-PILL-HUB | STM32 CPU Board | N/A | I/O | No | 0.1" |
Lights
- CCLED - Constant Current 1W LED card
- LED1W - 1W LED card
- LED1W4X - 4X 1W LED card
- LED-TEST-2 - Test outputs with a card that has 16 LEDs on it
- LED-Test - Test outputs with a card that has 16 LEDs on it
- LED-18 - A board with 18 white LEDs and Microprocessor control
- LED-12 - A board with 12 LEDs controlled by a 555 Timer
- LED-32 - A board with 32 LEDs and a common ground
Other Sensors
GPS
- USB-GPS - USB GPS tracker
- USB-GPS-Hammond - The USB-GPS layed out to fit into a standard Hammond enclosure
Power Cards
- BrBdPwrSply - Breadboard Power Supply
- PowerDistrib - Power Distribution card
- POWER-49MM - Power Distribution card
- PwrSply317 - Adjustable Power Supply - a true classic
- PWR-BLK-01 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
- PWR-BLK-02 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
- PWR-BLK-03 - USB LiPo charger plus 5V Switching Mode Power Supply
- USB-POWER - USB 5V Switching Mode Power Supply
Prototyping
All of our boards are excellent for prototyping, but these are especially designed for that purpose.
- UNI-OPAMP-08 - 8 Channel OpAmp
- SWLEDX8 - 8 Switches and 8 LEDs
- SWLEDX8-I2C - 16 bit I2C connection to SWLEDX8 card
- GRID49 - 49x49mm card with prototyping area
Raspberry Pi Boards
Documentation | Function | 3.3V GPIO | 5V GPIO | Compatible with |
---|---|---|---|---|
RasPi-GVS | GVS card | 0 | 16 | All Raspberry Pi Models |
RPP-UIO-16 | GVS card 3.3V/5V | 26 | 0-16 | Raspberry Pi Models A+, B+, Pi 2 |
RASPI-PLUS-GVS | GVS card 5V | 9 | 16 | Raspberry Pi Models A+, B+, Pi 2 |
RASPI-PLUS-GVS-CFG | Configurable GVS hat | 26 | 0-8 | Raspberry Pi Models A+, B+, Pi 2 |
RPIO-TINY | GVS card | 17 | 0 | All Raspberry Pi Models |
RPIO-TINY-2 | GVS card | 17 | 0-8 | All Raspberry Pi Models |
RPIO-TINY-3 | GVS card | 17 | 0 | All Raspberry Pi Models |
RPI-MDI | Servo card | 3 | 0 | All Raspberry Pi Models |
RPI-CONSOLE | Console extender card (Mini USB) | N/A | N/A | All Raspberry Pi Models |
RPI-CONSOLE-U | Console extender card (Micro USB) | N/A | N/A | All Raspberry Pi Models |
RPI-I2C-HUB | I2C Hub/repeater/level translator card | N/A | N/A | All Raspberry Pi Models |
RPPSOC | Programmable System On a Chip | N/A | N/A | Raspberry Pi Models A+, B+, Pi 2, Pi 3 |
RPI-PWR | Raspberry Pi Recessed Power Card | N/A | N/A | All Raspberry Pi Models |
PIATX | Raspberry Pi <> ATX Case Connections | N/A | N/A | All Raspberry Pi Models |
PC-Case-USB | ATX Case USB Connections | N/A | N/A | All Raspberry Pi Models |
Test Equipment
- CCLOAD-01 - Constant current load
- DB25RIBBON - DB-25 to Ribbon Cable Adapter
- DB37RIBBON - DB-37 to Ribbon Cable Adapter
- DiffProbe - Differential Oscilloscope Probe
- FTDIBkout - FTDI Breakout for debugging 6 pin FTDI connections
- IReflow - IR Reflow Oven Controller
- PulseGen - Fast Pulse Generator/Coax tester
- TinyOptoProbe - Optocoupled Logic probe
- VREF4096 - 4.096 Voltage Reference
Ancillary
X10
- X10 Filter - Filter out the noise from LED lights