MyMenu Rev X4 Assembly Sheet

From Land Boards Wiki
Revision as of 18:48, 6 June 2022 by Blwikiadmin (talk | contribs) (Created page with "== CAD == File:MyMenu-X4-FRONT_REAR_CAD.PNG == Parts List == {| class="wikitable" !Qty !Value !RefDes ! !Qty !Value !RefDes |- |3 |0 (0805) |R14,R16,R18 | |3 |LED (0805...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

CAD

MyMenu-X4-FRONT REAR CAD.PNG

Parts List

Qty Value RefDes Qty Value RefDes
3 0 (0805) R14,R16,R18 3 LED (0805) D1-D3
4 0/OPEN (0805) R10,R11,R20,R21 2 CONN_4 P1,P3
6 10K (0805) R6-R9,R12,R19 1 CONN, 5x1 P2
2 2.2K (0805) R1,R2 5 SW_PUSH, 6mm SW1-SW5
3 330 (0805) R3-R5 1 MCP23008SO U1
3 DNP (0805) R13,R15,R17

OLED Card Power Option

OLEDS cards have varying power/ground pinouts. Install 0 ohm resistors or leave open resistors to match pinout of OLED card used

OLED card pin 1 = Vcc case, pin 2 = GND

  • Install R10, R21 = 0 ohms for pin 1 = VCC, pin 2 = GND
  • R11, R20 left open

OLED card pin 1 = GND case for pin 1 = GND, pin 2 = VCC

  • Install R11, R20 = 0 ohms for pin 1 = GND case
  • R10, R21 left open
Retrieved from "http://land-boards.com/blwiki/index.php?title=MyMenu_Rev_X4_Assembly_Sheet&oldid=16511"