Difference between revisions of "FTDI-49MM"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
* FTDI FT230X IC | * FTDI FT230X IC | ||
* USB B connector (not micro or mini, but the beefy USB B connector) | * USB B connector (not micro or mini, but the beefy USB B connector) | ||
| + | * FTDI compatible pinout | ||
| + | * 3.3V or 5V selection jumper | ||
* Header for 5V power distribution | * Header for 5V power distribution | ||
| + | * Rx and Tx LEDs | ||
* (4) 4-40 mounting holes | * (4) 4-40 mounting holes | ||
** Mounts to 95mm to 45mm adapter | ** Mounts to 95mm to 45mm adapter | ||
Revision as of 11:22, 29 June 2020
Features
- FTDI FT230X IC
- USB B connector (not micro or mini, but the beefy USB B connector)
- FTDI compatible pinout
- 3.3V or 5V selection jumper
- Header for 5V power distribution
- Rx and Tx LEDs
- (4) 4-40 mounting holes
- Mounts to 95mm to 45mm adapter
- Stacks up with standoffs for use with other 95mm cards
Stackup with EP2 FPGA card
Pinout
- GND
- CTS* (in)
- VCC
- TX (out)
- RX (in)
- RTS* (out)
