PiPicoMite02 Rev1 Assembly Sheet

From Land Boards Wiki
Jump to navigation Jump to search

PiPicoMite-02 P18268 720px.jpg

PicoMite02 Rev1 CAD.PNG

Parts List[edit]

Find Qty Ref Des Part Number Find Qty Ref Des Part Number
1 4 C1, C2, C7, C8 0.1uF 15 1 J1 Header, 1x5
2 2 C3, C5 47nF 16 2 J2, J3 Header, Female. 1x20
3 2 C4, C6 47uF 17 1 J4 Header, 1x2
4 1 D1 MBR0520T1J 18 1 J5 Header, Vert, 2x2
5 1 D2 (alt for D1) 1N5819 Mouser 19 1 J6 Header, Vert, 2x8
6 7 R1-R3, R5, R10, R12, R15 2.2K 20 1 J7 Header, Vert, 2x3
7 2 R4, R9 270 21 1 J8 AudioJack3 Mouser
8 1 R6 390 22 1 J9 CONN, DB15HD, BLUE (VGA) Mouser
9 1 R7 820 23 1 J10 USB-B Mouser
10 2 R8, R13 1K 24 1 J11 PS2_DIN6 ebay search
11 2 R11, R14 47 25 1 P1 DB37 female
12 2 R16, R17 10K 26 1 U1 Raspberry Pi Pico Digikey Adafruit]
13 1 U3 TXS0104EDR or TXS0104ED 27 2 U2, U4 MCP23017_SP Adafruit optional Socket. 28-pin, 0.3in Mouser quality part
14 1 SD1 Conn, SD Card Mouser

Notes[edit]

  1. Install either D1 or D2
  2. Can use 1N400x in place of Schottky diode at D1/D2 location
  3. DC can be provided via header pins on J7 so J10 (USB B power connector) can be omitted
  4. U2, U4 sockets are optional
  5. Install shunts at J4, J5 as required per wiki page
  6. Resistor pads fit either 1/8W or 1/4W parts (1/4W shown here)

Res 8th Qrtr W P18205.JPG