Difference between revisions of "QM Tech Cyclone V FPGA Board"

From Land Boards Wiki
Jump to navigation Jump to search
Line 97: Line 97:
 
* Takes a while to program
 
* Takes a while to program
 
* Press button near VGA
 
* Press button near VGA
 +
 +
set_global_assignment -name FAMILY "Cyclone V"
 +
set_global_assignment -name DEVICE 5CEFA2F23I7
 +
set_global_assignment -name TOP_LEVEL_ENTITY TS2_68000_Top
 +
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.0
 +
set_global_assignment -name PROJECT_CREATION_TIME_DATE "07:21:26  JULY 04, 2020"
 +
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition"
 +
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
 +
set_global_assignment -name MIN_CORE_JUNCTION_TEMP "-40"
 +
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 100
 +
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
 +
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)"
 +
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
 +
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation
 +
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
 +
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
 +
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
 +
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
 +
set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"
 +
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS ON
 +
set_global_assignment -name SMART_RECOMPILE ON
 +
# Clock and reset
 +
set_location_assignment PIN_M9 -to i_CLOCK_50
 +
set_location_assignment PIN_V18 -to n_reset
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset
 +
# Serial
 +
set_location_assignment PIN_B11 -to cts1
 +
set_location_assignment PIN_F10 -to rts1
 +
set_location_assignment PIN_C11 -to rxd1
 +
set_location_assignment PIN_G10 -to txd1
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rxd1
 +
set_location_assignment PIN_L17 -to serSelect
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to serSelect
 +
# SRAM
 +
set_location_assignment PIN_E2 -to n_sRamCS
 +
set_location_assignment PIN_L2 -to n_sRamOE
 +
set_location_assignment PIN_D6 -to n_sRamWE
 +
set_location_assignment PIN_E9 -to sramAddress[19]
 +
set_location_assignment PIN_B5 -to sramAddress[18]
 +
set_location_assignment PIN_B6 -to sramAddress[17]
 +
set_location_assignment PIN_A7 -to sramAddress[16]
 +
set_location_assignment PIN_A10 -to sramAddress[15]
 +
set_location_assignment PIN_A9 -to sramAddress[14]
 +
set_location_assignment PIN_B7 -to sramAddress[13]
 +
set_location_assignment PIN_A5 -to sramAddress[12]
 +
set_location_assignment PIN_D9 -to sramAddress[11]
 +
set_location_assignment PIN_C6 -to sramAddress[10]
 +
set_location_assignment PIN_E7 -to sramAddress[9]
 +
set_location_assignment PIN_G2 -to sramAddress[8]
 +
set_location_assignment PIN_N2 -to sramAddress[7]
 +
set_location_assignment PIN_U2 -to sramAddress[6]
 +
set_location_assignment PIN_W2 -to sramAddress[5]
 +
set_location_assignment PIN_Y3 -to sramAddress[4]
 +
set_location_assignment PIN_U1 -to sramAddress[3]
 +
set_location_assignment PIN_N1 -to sramAddress[2]
 +
set_location_assignment PIN_L1 -to sramAddress[1]
 +
set_location_assignment PIN_G1 -to sramAddress[0]
 +
set_location_assignment PIN_C1 -to sramData[0]
 +
set_location_assignment PIN_G6 -to sramData[1]
 +
set_location_assignment PIN_G8 -to sramData[2]
 +
set_location_assignment PIN_F7 -to sramData[3]
 +
set_location_assignment PIN_H8 -to sramData[4]
 +
set_location_assignment PIN_H6 -to sramData[5]
 +
set_location_assignment PIN_C2 -to sramData[6]
 +
set_location_assignment PIN_D3 -to sramData[7]
 +
# SD Card
 +
set_location_assignment PIN_B15 -to sdCS
 +
set_location_assignment PIN_B16 -to sdMISO
 +
set_location_assignment PIN_C15 -to sdMOSI
 +
set_location_assignment PIN_C16 -to sdSCLK
 +
set_location_assignment PIN_D17 -to driveLED
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdMISO
 +
# Video
 +
set_location_assignment PIN_A15 -to hSync
 +
set_location_assignment PIN_D12 -to videoR1
 +
set_location_assignment PIN_E12 -to videoR0
 +
set_location_assignment PIN_C13 -to videoG1
 +
set_location_assignment PIN_D13 -to videoG0
 +
set_location_assignment PIN_A13 -to videoB1
 +
set_location_assignment PIN_B13 -to videoB0
 +
set_location_assignment PIN_A14 -to vSync
 +
# PS/2
 +
set_location_assignment PIN_AA2 -to ps2Clk
 +
set_location_assignment PIN_AA1 -to ps2Data
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Clk
 +
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Data
 +
# SDRAM
 +
set_location_assignment PIN_AA7 -to n_sdRamCas
 +
set_location_assignment PIN_AB5 -to n_sdRamCe
 +
set_location_assignment PIN_AB6 -to n_sdRamRas
 +
set_location_assignment PIN_W9 -to n_sdRamWe
 +
set_location_assignment PIN_P9 -to sdRamAddr[14]
 +
set_location_assignment PIN_T7 -to sdRamAddr[13]
 +
set_location_assignment PIN_Y9 -to sdRamAddr[12]
 +
set_location_assignment PIN_T9 -to sdRamAddr[11]
 +
set_location_assignment PIN_R6 -to sdRamAddr[10]
 +
set_location_assignment PIN_W8 -to sdRamAddr[9]
 +
set_location_assignment PIN_T8 -to sdRamAddr[8]
 +
set_location_assignment PIN_U8 -to sdRamAddr[7]
 +
set_location_assignment PIN_V6 -to sdRamAddr[6]
 +
set_location_assignment PIN_U7 -to sdRamAddr[5]
 +
set_location_assignment PIN_U6 -to sdRamAddr[4]
 +
set_location_assignment PIN_N6 -to sdRamAddr[3]
 +
set_location_assignment PIN_N8 -to sdRamAddr[2]
 +
set_location_assignment PIN_P7 -to sdRamAddr[1]
 +
set_location_assignment PIN_P8 -to sdRamAddr[0]
 +
set_location_assignment PIN_AB11 -to sdRamClk
 +
set_location_assignment PIN_V9 -to sdRamClkEn
 +
set_location_assignment PIN_P12 -to sdRamData[15]
 +
set_location_assignment PIN_R12 -to sdRamData[14]
 +
set_location_assignment PIN_U12 -to sdRamData[13]
 +
set_location_assignment PIN_R11 -to sdRamData[12]
 +
set_location_assignment PIN_R10 -to sdRamData[11]
 +
set_location_assignment PIN_U11 -to sdRamData[10]
 +
set_location_assignment PIN_T10 -to sdRamData[9]
 +
set_location_assignment PIN_U10 -to sdRamData[8]
 +
set_location_assignment PIN_AA8 -to sdRamData[7]
 +
set_location_assignment PIN_AB8 -to sdRamData[6]
 +
set_location_assignment PIN_AA9 -to sdRamData[5]
 +
set_location_assignment PIN_Y10 -to sdRamData[4]
 +
set_location_assignment PIN_AB10 -to sdRamData[3]
 +
set_location_assignment PIN_AA10 -to sdRamData[2]
 +
set_location_assignment PIN_Y11 -to sdRamData[1]
 +
set_location_assignment PIN_AA12 -to sdRamData[0]
 +
#50-pin I/O Connector
 +
set_location_assignment PIN_AB15 -to IO_PIN[3]
 +
set_location_assignment PIN_AA15 -to IO_PIN[4]
 +
set_location_assignment PIN_Y14 -to IO_PIN[5]
 +
set_location_assignment PIN_Y15 -to IO_PIN[6]
 +
set_location_assignment PIN_AB17 -to IO_PIN[7]
 +
set_location_assignment PIN_AB18 -to IO_PIN[8]
 +
set_location_assignment PIN_Y16 -to IO_PIN[9]
 +
set_location_assignment PIN_Y17 -to IO_PIN[10]
 +
set_location_assignment PIN_AA17 -to IO_PIN[11]
 +
set_location_assignment PIN_AA18 -to IO_PIN[12]
 +
set_location_assignment PIN_AA19 -to IO_PIN[13]
 +
set_location_assignment PIN_AA20 -to IO_PIN[14]
 +
set_location_assignment PIN_Y19 -to IO_PIN[15]
 +
set_location_assignment PIN_Y20 -to IO_PIN[16]
 +
set_location_assignment PIN_AB20 -to IO_PIN[17]
 +
set_location_assignment PIN_AB21 -to IO_PIN[18]
 +
set_location_assignment PIN_AB22 -to IO_PIN[19]
 +
set_location_assignment PIN_AA22 -to IO_PIN[20]
 +
set_location_assignment PIN_Y22 -to IO_PIN[21]
 +
set_location_assignment PIN_W22 -to IO_PIN[22]
 +
set_location_assignment PIN_W21 -to IO_PIN[23]
 +
set_location_assignment PIN_Y21 -to IO_PIN[24]
 +
set_location_assignment PIN_V21 -to IO_PIN[25]
 +
set_location_assignment PIN_U22 -to IO_PIN[26]
 +
set_location_assignment PIN_W19 -to IO_PIN[27]
 +
set_location_assignment PIN_V20 -to IO_PIN[28]
 +
set_location_assignment PIN_U20 -to IO_PIN[29]
 +
set_location_assignment PIN_U21 -to IO_PIN[30]
 +
set_location_assignment PIN_T22 -to IO_PIN[31]
 +
set_location_assignment PIN_R22 -to IO_PIN[32]
 +
set_location_assignment PIN_R21 -to IO_PIN[33]
 +
set_location_assignment PIN_P22 -to IO_PIN[34]
 +
set_location_assignment PIN_T19 -to IO_PIN[35]
 +
set_location_assignment PIN_T20 -to IO_PIN[36]
 +
set_location_assignment PIN_P17 -to IO_PIN[37]
 +
set_location_assignment PIN_P16 -to IO_PIN[38]
 +
set_location_assignment PIN_N21 -to IO_PIN[39]
 +
set_location_assignment PIN_N20 -to IO_PIN[40]
 +
set_location_assignment PIN_M20 -to IO_PIN[41]
 +
set_location_assignment PIN_M21 -to IO_PIN[42]
 +
set_location_assignment PIN_N19 -to IO_PIN[43]
 +
set_location_assignment PIN_M18 -to IO_PIN[44]
 +
set_location_assignment PIN_L19 -to IO_PIN[45]
 +
set_location_assignment PIN_L18 -to IO_PIN[46]
 +
set_location_assignment PIN_L22 -to IO_PIN[47]
 +
set_location_assignment PIN_M22 -to IO_PIN[48]
 +
#
 +
set_global_assignment -name ENABLE_SIGNALTAP OFF
 +
set_global_assignment -name USE_SIGNALTAP_FILE stp1.stp
 +
set_global_assignment -name ENABLE_OCT_DONE OFF
 +
set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF
 +
set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF
 +
set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
 +
set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF
 +
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"
 +
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise
 +
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall
 +
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise
 +
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall
 +
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
 +
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO"
 +
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO"
 +
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/Debounce/LongDebounce/debounce.vhd"
 +
set_global_assignment -name VHDL_FILE Components/RAM_16Kx16.vhd
 +
set_global_assignment -name VHDL_FILE Components/RAM_4Kx16.vhd
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SBCTextDisplayRGB.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SansBoldRomReduced.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SansBoldRom.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/DisplayRam2K.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/DisplayRam1K.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/CGABoldRomReduced.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/CGABoldRom.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/UART/bufferedUART.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68KdotC_Kernel.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68K_Pack.vhd"
 +
set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68K_ALU.vhd"
 +
set_global_assignment -name VHDL_FILE TS2_68000_Top.vhd
 +
set_global_assignment -name QIP_FILE Components/Monitor_68K_ROM.qip
 +
set_global_assignment -name QIP_FILE Components/RAM_8Kx16.qip
 +
set_global_assignment -name NUM_PARALLEL_PROCESSORS ALL
 +
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
  
 
== Resources ==
 
== Resources ==
  
 
* [https://github.com/ChinaQMTECH/QM_CYCLONE_V GitHub Repo]
 
* [https://github.com/ChinaQMTECH/QM_CYCLONE_V GitHub Repo]

Revision as of 00:35, 11 August 2020

QMTECH 5CEFA2F23 Datasheet CCA Pic.PNG

  • QMTECH Altera Intel FPGA Core Board Cyclone V CycloneV 5CEFA2F23 SDRAM
    • On-Board FPGA: 5CEFA2F23I7N
    • On-Board FPGA external crystal frequency: 50MHz
    • 5CEFA2F23 has rich RAM resource up to 1,760Kb
    • 5CEFA2F23 has 25K logic cells
    • On-Board Micron MT25QL128A SPI Flash, 16M bytes for user configuration code
    • On-Board Winbond 32MB SDRAM, W9825G6KH-6
    • On-Board 3.3V power supply for FPGA by using MP2315 wide input range DC/DC
    • 5CEFA2F23 core board has two 64p, 2.54mm pitch headers for extending 108 user IOs. All 108 user IOs are precisely designed with length matching
    • 5CEFA2F23 core board has 3 user switches
    • 5CEFA2F23 core board has 2 user LEDs
    • 5CEFA2F23 core board has JTAG interface, by using 10p, 2.54mm pitch header
    • 5CEFA2F23 core board PCB size is: 6.7cm x 8.4cm
    • Default power source for board is: 1A@5V DC, the DC header type: DC-050, 5.5mmx2.1mm

FPGA

QMTECH 5CEFA2F23 Datasheet CCA FPGA-rotated.PNG

5CEFA2 FEATURES.PNG

5CEFA2F23 FPGA Resources

  • CLK_50M = PIN_BANK_3B_M9

LEDs/Switches

  • Power LED = D4 (On when 5V is applied)
  • User LED = LED_D5 = FPGA Pin_BANK_7A_D17
  • KEY0 = SW1 = FPGA Pin_BANK_4A_AB13
  • RESET_N = SW2 = FPGA PIN_BANK_4A_V16
  • nCONFIG = SW3 = FPGA PIN_BANK_9A_A4
  • JP5 - 5V

SDRAM

CycloneV SDRAM.png

SDRAM Pins

  • sdRamClk = PIN_BANK_3B_AB11
  • sdRamClkEn = PIN_BANK_3B_V9
  • n_sdRamCas = PIN_BANK_3B_AA7
  • n_sdRamCe = PIN_BANK_3B_AB5
  • n_sdRamRas = PIN_BANK_3B_AB6
  • n_sdRamWe = PIN_BANK_3A_W9
  • sdRamAddr[0] = PIN_BANK_3B_P8
  • sdRamAddr[1] = PIN_BANK_3A_P7
  • sdRamAddr[2] = PIN_BANK_3B_N8
  • sdRamAddr[3] = PIN_BANK_3A_N6
  • sdRamAddr[4] = PIN_BANK_3A_U6
  • sdRamAddr[5] = PIN_BANK_3A_U7
  • sdRamAddr[6] = PIN_BANK_3A_V6
  • sdRamAddr[7] = PIN_BANK_3A_U8
  • sdRamAddr[8] = PIN_BANK_3A_T8
  • sdRamAddr[9] = PIN_BANK_3A_W8
  • sdRamAddr[10] = PIN_BANK_3A_R6
  • sdRamAddr[11] = PIN_BANK_3B_T9
  • sdRamAddr[12] = PIN_BANK_3B_Y9
  • sdRamAddr[13] = PIN_BANK_3A_T7
  • sdRamAddr[14] = PIN_BANK_3B_P9
  • sdRamData[0] = PIN_BANK_3B_AA12
  • sdRamData[1] = PIN_BANK_3B_Y11
  • sdRamData[2] = PIN_BANK_3B_AA10
  • sdRamData[3] = PIN_BANK_3B_AB10
  • sdRamData[4] = PIN_BANK_3B_Y10
  • sdRamData[5] = PIN_BANK_3B_AA9
  • sdRamData[6] = PIN_BANK_3B_AB8
  • sdRamData[7] = PIN_BANK_3B_AA8
  • sdRamData[8] = PIN_BANK_3B_U10
  • sdRamData[9] = PIN_BANK_3B_T10
  • sdRamData[10] = PIN_BANK_3B_U11
  • sdRamData[11] = PIN_BANK_3B_R10
  • sdRamData[12] = PIN_BANK_3B_R11
  • sdRamData[13] = PIN_BANK_3B_U12
  • sdRamData[14] = PIN_BANK_3B_R12
  • sdRamData[15] = PIN_BANK_3B_P12

Programming the FPGA EEPROM (5CEFA2F23 FPGA)

  • File
  • Convert Programming File
  • Configuration Device = MT25QL128
  • Mode = Active Serial
  • Programming File Type: *.jic
  • Advanced = Check both Disables...
  • Select Flash Loader
  • Add Device = Cyclone V and 5CEFA2
  • Select SOF Data
  • Select Add File and select the .sof file
  • Generate
  • In Tools, Programmer
  • Mode: JTAG
  • Add file and select the .jic file
  • Select Program/Configure
  • Takes a while to program
  • Press button near VGA

set_global_assignment -name FAMILY "Cyclone V" set_global_assignment -name DEVICE 5CEFA2F23I7 set_global_assignment -name TOP_LEVEL_ENTITY TS2_68000_Top set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.0 set_global_assignment -name PROJECT_CREATION_TIME_DATE "07:21:26 JULY 04, 2020" set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files set_global_assignment -name MIN_CORE_JUNCTION_TEMP "-40" set_global_assignment -name MAX_CORE_JUNCTION_TEMP 100 set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1 set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)" set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW" set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)" set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS ON set_global_assignment -name SMART_RECOMPILE ON

  1. Clock and reset

set_location_assignment PIN_M9 -to i_CLOCK_50 set_location_assignment PIN_V18 -to n_reset set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset

  1. Serial

set_location_assignment PIN_B11 -to cts1 set_location_assignment PIN_F10 -to rts1 set_location_assignment PIN_C11 -to rxd1 set_location_assignment PIN_G10 -to txd1 set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rxd1 set_location_assignment PIN_L17 -to serSelect set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to serSelect

  1. SRAM

set_location_assignment PIN_E2 -to n_sRamCS set_location_assignment PIN_L2 -to n_sRamOE set_location_assignment PIN_D6 -to n_sRamWE set_location_assignment PIN_E9 -to sramAddress[19] set_location_assignment PIN_B5 -to sramAddress[18] set_location_assignment PIN_B6 -to sramAddress[17] set_location_assignment PIN_A7 -to sramAddress[16] set_location_assignment PIN_A10 -to sramAddress[15] set_location_assignment PIN_A9 -to sramAddress[14] set_location_assignment PIN_B7 -to sramAddress[13] set_location_assignment PIN_A5 -to sramAddress[12] set_location_assignment PIN_D9 -to sramAddress[11] set_location_assignment PIN_C6 -to sramAddress[10] set_location_assignment PIN_E7 -to sramAddress[9] set_location_assignment PIN_G2 -to sramAddress[8] set_location_assignment PIN_N2 -to sramAddress[7] set_location_assignment PIN_U2 -to sramAddress[6] set_location_assignment PIN_W2 -to sramAddress[5] set_location_assignment PIN_Y3 -to sramAddress[4] set_location_assignment PIN_U1 -to sramAddress[3] set_location_assignment PIN_N1 -to sramAddress[2] set_location_assignment PIN_L1 -to sramAddress[1] set_location_assignment PIN_G1 -to sramAddress[0] set_location_assignment PIN_C1 -to sramData[0] set_location_assignment PIN_G6 -to sramData[1] set_location_assignment PIN_G8 -to sramData[2] set_location_assignment PIN_F7 -to sramData[3] set_location_assignment PIN_H8 -to sramData[4] set_location_assignment PIN_H6 -to sramData[5] set_location_assignment PIN_C2 -to sramData[6] set_location_assignment PIN_D3 -to sramData[7]

  1. SD Card

set_location_assignment PIN_B15 -to sdCS set_location_assignment PIN_B16 -to sdMISO set_location_assignment PIN_C15 -to sdMOSI set_location_assignment PIN_C16 -to sdSCLK set_location_assignment PIN_D17 -to driveLED set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdMISO

  1. Video

set_location_assignment PIN_A15 -to hSync set_location_assignment PIN_D12 -to videoR1 set_location_assignment PIN_E12 -to videoR0 set_location_assignment PIN_C13 -to videoG1 set_location_assignment PIN_D13 -to videoG0 set_location_assignment PIN_A13 -to videoB1 set_location_assignment PIN_B13 -to videoB0 set_location_assignment PIN_A14 -to vSync

  1. PS/2

set_location_assignment PIN_AA2 -to ps2Clk set_location_assignment PIN_AA1 -to ps2Data set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Data

  1. SDRAM

set_location_assignment PIN_AA7 -to n_sdRamCas set_location_assignment PIN_AB5 -to n_sdRamCe set_location_assignment PIN_AB6 -to n_sdRamRas set_location_assignment PIN_W9 -to n_sdRamWe set_location_assignment PIN_P9 -to sdRamAddr[14] set_location_assignment PIN_T7 -to sdRamAddr[13] set_location_assignment PIN_Y9 -to sdRamAddr[12] set_location_assignment PIN_T9 -to sdRamAddr[11] set_location_assignment PIN_R6 -to sdRamAddr[10] set_location_assignment PIN_W8 -to sdRamAddr[9] set_location_assignment PIN_T8 -to sdRamAddr[8] set_location_assignment PIN_U8 -to sdRamAddr[7] set_location_assignment PIN_V6 -to sdRamAddr[6] set_location_assignment PIN_U7 -to sdRamAddr[5] set_location_assignment PIN_U6 -to sdRamAddr[4] set_location_assignment PIN_N6 -to sdRamAddr[3] set_location_assignment PIN_N8 -to sdRamAddr[2] set_location_assignment PIN_P7 -to sdRamAddr[1] set_location_assignment PIN_P8 -to sdRamAddr[0] set_location_assignment PIN_AB11 -to sdRamClk set_location_assignment PIN_V9 -to sdRamClkEn set_location_assignment PIN_P12 -to sdRamData[15] set_location_assignment PIN_R12 -to sdRamData[14] set_location_assignment PIN_U12 -to sdRamData[13] set_location_assignment PIN_R11 -to sdRamData[12] set_location_assignment PIN_R10 -to sdRamData[11] set_location_assignment PIN_U11 -to sdRamData[10] set_location_assignment PIN_T10 -to sdRamData[9] set_location_assignment PIN_U10 -to sdRamData[8] set_location_assignment PIN_AA8 -to sdRamData[7] set_location_assignment PIN_AB8 -to sdRamData[6] set_location_assignment PIN_AA9 -to sdRamData[5] set_location_assignment PIN_Y10 -to sdRamData[4] set_location_assignment PIN_AB10 -to sdRamData[3] set_location_assignment PIN_AA10 -to sdRamData[2] set_location_assignment PIN_Y11 -to sdRamData[1] set_location_assignment PIN_AA12 -to sdRamData[0]

  1. 50-pin I/O Connector

set_location_assignment PIN_AB15 -to IO_PIN[3] set_location_assignment PIN_AA15 -to IO_PIN[4] set_location_assignment PIN_Y14 -to IO_PIN[5] set_location_assignment PIN_Y15 -to IO_PIN[6] set_location_assignment PIN_AB17 -to IO_PIN[7] set_location_assignment PIN_AB18 -to IO_PIN[8] set_location_assignment PIN_Y16 -to IO_PIN[9] set_location_assignment PIN_Y17 -to IO_PIN[10] set_location_assignment PIN_AA17 -to IO_PIN[11] set_location_assignment PIN_AA18 -to IO_PIN[12] set_location_assignment PIN_AA19 -to IO_PIN[13] set_location_assignment PIN_AA20 -to IO_PIN[14] set_location_assignment PIN_Y19 -to IO_PIN[15] set_location_assignment PIN_Y20 -to IO_PIN[16] set_location_assignment PIN_AB20 -to IO_PIN[17] set_location_assignment PIN_AB21 -to IO_PIN[18] set_location_assignment PIN_AB22 -to IO_PIN[19] set_location_assignment PIN_AA22 -to IO_PIN[20] set_location_assignment PIN_Y22 -to IO_PIN[21] set_location_assignment PIN_W22 -to IO_PIN[22] set_location_assignment PIN_W21 -to IO_PIN[23] set_location_assignment PIN_Y21 -to IO_PIN[24] set_location_assignment PIN_V21 -to IO_PIN[25] set_location_assignment PIN_U22 -to IO_PIN[26] set_location_assignment PIN_W19 -to IO_PIN[27] set_location_assignment PIN_V20 -to IO_PIN[28] set_location_assignment PIN_U20 -to IO_PIN[29] set_location_assignment PIN_U21 -to IO_PIN[30] set_location_assignment PIN_T22 -to IO_PIN[31] set_location_assignment PIN_R22 -to IO_PIN[32] set_location_assignment PIN_R21 -to IO_PIN[33] set_location_assignment PIN_P22 -to IO_PIN[34] set_location_assignment PIN_T19 -to IO_PIN[35] set_location_assignment PIN_T20 -to IO_PIN[36] set_location_assignment PIN_P17 -to IO_PIN[37] set_location_assignment PIN_P16 -to IO_PIN[38] set_location_assignment PIN_N21 -to IO_PIN[39] set_location_assignment PIN_N20 -to IO_PIN[40] set_location_assignment PIN_M20 -to IO_PIN[41] set_location_assignment PIN_M21 -to IO_PIN[42] set_location_assignment PIN_N19 -to IO_PIN[43] set_location_assignment PIN_M18 -to IO_PIN[44] set_location_assignment PIN_L19 -to IO_PIN[45] set_location_assignment PIN_L18 -to IO_PIN[46] set_location_assignment PIN_L22 -to IO_PIN[47] set_location_assignment PIN_M22 -to IO_PIN[48]

set_global_assignment -name ENABLE_SIGNALTAP OFF set_global_assignment -name USE_SIGNALTAP_FILE stp1.stp set_global_assignment -name ENABLE_OCT_DONE OFF set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF set_global_assignment -name USE_CONFIGURATION_DEVICE OFF set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/Debounce/LongDebounce/debounce.vhd" set_global_assignment -name VHDL_FILE Components/RAM_16Kx16.vhd set_global_assignment -name VHDL_FILE Components/RAM_4Kx16.vhd set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SBCTextDisplayRGB.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SansBoldRomReduced.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/SansBoldRom.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/DisplayRam2K.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/DisplayRam1K.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/CGABoldRomReduced.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/TERMINAL/CGABoldRom.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/UART/bufferedUART.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68KdotC_Kernel.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68K_Pack.vhd" set_global_assignment -name VHDL_FILE "../../MultiComp (VHDL Template)/Components/CPU/M68000/TG68K_2013/TG68K_ALU.vhd" set_global_assignment -name VHDL_FILE TS2_68000_Top.vhd set_global_assignment -name QIP_FILE Components/Monitor_68K_ROM.qip set_global_assignment -name QIP_FILE Components/RAM_8Kx16.qip set_global_assignment -name NUM_PARALLEL_PROCESSORS ALL set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top

Resources