Difference between revisions of "QTPy49"

From Land Boards Wiki
Jump to navigation Jump to search
Line 136: Line 136:
 
* Digital I/O 3
 
* Digital I/O 3
 
* Analog In 3
 
* Analog In 3
 +
* GP29 on XIAO-RP2040
 +
* PA05 on Adafruit SAMD21
 
* PWM output
 
* PWM output
 
* Capacitive touch input
 
* Capacitive touch input

Revision as of 11:25, 12 August 2022

Tindie-mediums.png

QTPy49 P18254-720px.jpg

Features

CPU Pinouts

Adafruit QT Py SAMD

Adafruit products Adafruit QT Py SAMD21 pinout.png

Seeed Studio XAIO SAMD

Seeeduino-XIAO-pin-out.jpg

Adafruit QT Py RP2040

Adafruit products qtpy-rp2040-pins.png

Seeed Studio XAIO RP2040

Seeed-xinpin-rp2040.jpg

Connectors/Headers

QTPy49-P18253-720pxV.jpg

  • Ground, Voltage, Signal (GVS) connections

J1 - DC In

  • QTPy49 can be powered from either the USB C or DC jack
    • Automatic Schottky diode power switching
      • Can use a regular Silicon Diode with sufficient current ex: 1N400X)
    • 7-12V if regulator is installed
    • 5V if regulator is not installed (install J2 jumper if not using regulator)
  • Center positive

J2 - Short Regulator

  • Install if J1 has 5V
  • No need to install U2 regulator

J3 - SPI

  1. GND
  2. 3.3V
  3. SS, AD3 (wired to J6-3)
  4. MOSI, S10
  5. MISO, D9
  6. SCK, D8

J3 - SD Card

  • MISO - AD9
    • GP4 on XIAO-RP2040
    • PA09 on Adafruit SAMD21
  • MOSI - AD10
    • GP3 on XIAO-RP2040
    • PA10 on Adafruit SAMD21
  • SCK - AD8
    • GP2 on XIAO-RP2040
    • PA11 on Adafruit SAMD21
  • SS - AD0
    • GP26 on XIAO-RP2040
    • PA02 on Adafruit SAMD21

J4 - UART

  1. GND
  2. 3.3V
  3. TX, D6
  4. RX, D7
  • D6
    • GP0 on XIAO-RP2040
    • PA06 on Adafruit SAMD21
  • D7
    • GP1 on XIAO-RP2040
    • PA07 on Adafruit SAMD21

J5 - I2C

  1. GND
  2. 3.3V
  3. D4, SDA
  4. D5, SCL
  • D4
    • GP6 on XIAO-RP2040
    • PA16 on Adafruit SAMD21
  • D5
    • GP7 on XIAO-RP2040
    • PA17 on Adafruit SAMD21

J6 - AD3

  • Digital I/O 3
  • Analog In 3
  • GP29 on XIAO-RP2040
  • PA05 on Adafruit SAMD21
  • PWM output
  • Capacitive touch input
  • Pinout
  1. GND
  2. 3.3V
  3. AD3 (wired to J3-3)

J7 - AD2

  • Digital I/O 2
  • Analog In 2
  • PWM
  • Capacitive touch input
  • Pinout
  1. GND
  2. 3.3V
  3. AD2

J8 - AD1

  • Digital I/O 1
  • Analog In 1
  • Capacitive touch input
  • AREF pin
  • Pinout
  1. GND
  2. 3.3V
  3. AD1

J9 - AD0

  • Digital I/O 0
  • Analog In 0
  • True analog output with 10 bit precision
  • Does not have PWM
  • Capacitive touch input
  • Pinout
  1. GND
  2. 3.3V
  3. AD0

Applications

Sample applications for the QTPy49 card.

SD Card Loader

GPS frequency Standard

Pulse Generator Test Station

PulseGen TestStation P18373-720px.jpg

Prototype

  • Built on GRID49 card
  • Breaks out QY Py pins to (2) 1x7 headers
  • Power/ground distribution on 2x8 header
  • Limit: Must be powered from USB C connector

QTPy Proto P18238-720px.jpg

Mechanicals

QTPy49 MECHS.PNG

Assembly Sheet