Difference between revisions of "QTPy49-01"

From Land Boards Wiki
Jump to navigation Jump to search
Line 181: Line 181:
 
Run MMBASIC over USB port.
 
Run MMBASIC over USB port.
  
==== pin assignments ====
+
==== XIAO RP2040 MMBASIC Pin Assignments ====
  
 
<pre>
 
<pre>

Revision as of 16:08, 13 August 2022

QTPy49-01-01 FRONT REV1.png

Features

CPU Pinouts

Adafruit QT Py SAMD

Adafruit products Adafruit QT Py SAMD21 pinout.png

Seeed Studio XAIO SAMD

Seeeduino-XIAO-pin-out.jpg

Adafruit QT Py RP2040

Adafruit products qtpy-rp2040-pins.png

Seeed Studio XAIO RP2040

Seeed-xinpin-rp2040.jpg

Connectors/Headers

QTPy49-01 CAD.PNG

  • Ground, Voltage, Signal (GVS) connections

J1 - DC In

  • QTPy49 can be powered from either the USB C or DC jack
    • Automatic Schottky diode power switching
      • Can use a regular Silicon Diode with sufficient current ex: 1N400X)
    • 7-12V if regulator is installed
    • 5V if regulator is not installed (install J2 jumper if not using regulator)
  • Center positive

J2 - Alternate Power

  1. VSYS (5V) (bottom pin)
  2. DC IN (connects to J1)
  3. GND (top pin)

J3 - SD Card

  • MISO - AD9
    • GP4 on XIAO-RP2040 and SeeedStudio RP2040
    • PA09 on Adafruit SAMD21
  • MOSI - AD10
    • GP3 on XIAO-RP2040 and SeeedStudio RP2040
    • PA10 on Adafruit SAMD21
  • SCK - AD8
    • GP2 on XIAO-RP2040
    • GP6 on SeeedStudio RP2040
    • PA11 on Adafruit SAMD21
  • SS - AD0
    • GP26 on XIAO-RP2040
    • GP29 on SeeedStudio RP2040
    • PA02 on Adafruit SAMD21

J4 - UART

  1. GND
  2. 3.3V
  3. TX, D6
  4. RX, D7
  • D6
    • GP0 on XIAO-RP2040
    • GP20 on Adafruit RP2040
    • PA06 on Adafruit SAMD21
  • D7
    • GP1 on XIAO-RP2040
    • PA07 on Adafruit SAMD21
    • GP5 on Adafruit RP2040

J5 - I2C

  1. GND
  2. 3.3V
  3. D4, SDA - GP6 on XIAO-RP2040
  4. D5, SCL - GP7 on XIAO-RP2040
  • D4
    • GP6 on XIAO-RP2040
    • GP24 on Adafruit RP2040
    • PA16 on Adafruit SAMD21
  • D5
    • GP7 on XIAO-RP2040
    • GP25 on Adafruit RP2040
    • PA17 on Adafruit SAMD21

J6 - AD3

  • Digital I/O 3
  • Analog In 3
  • GP29 on XIAO-RP2040
  • GP24 on Adafruit RP2040
  • PA05 on Adafruit SAMD21
  • PWM output
  • Capacitive touch input
  • Pinout
  1. GND
  2. 3.3V
  3. AD3 (wired to J3-3)

J7 - AD2

  • Digital I/O 2
  • Analog In 2
  • GP28 on XIAO-RP2040
  • GP27 on Adafruit RP2040
  • PA05 on Adafruit SAMD21
  • PWM
  • Capacitive touch input
  • Pinout
  1. GND
  2. 3.3V
  3. AD2

J8 - AD1

  • Digital I/O 1
  • Analog In 1
  • GP27 on XIAO-RP2040
  • GP28 on Adafruit RP2040
  • PA03 on Adafruit SAMD21
  • Capacitive touch input
  • AREF pin
  • Pinout
  1. GND
  2. 3.3V
  3. AD1

Applications

Sample applications for the QTPy49-01 card.

MMBASIC XIAO RP2040

Run MMBASIC over USB port.

XIAO RP2040 MMBASIC Pin Assignments

OPTION SERIAL CONSOLE COM1,GP0,GP1
OPTION SYSTEM SPI GP2,GP3,GP4
OPTION COLOURCODE ON
OPTION SDCARD GP26

SD Card Loader

Mechanicals

QTPy49-01 MECHS.PNG

Prototype

QTPy49 MMBASIC P18412-720px.jpg

Assembly Sheet