Difference between pages "File:TIA P1015 720px.jpg" and "Arduino Based Test Station"

From Land Boards Wiki
(Difference between pages)
Jump to navigation Jump to search
 
 
Line 1: Line 1:
 +
[[file:DIGIO32-I2C_P1994_720px.jpg]]
  
 +
<video type="youtube">yfm2ZRHHBAg</video>
 +
 +
== Hardware ==
 +
 +
* [[BLACK-PILL-HUB]] - Test Station Processing element
 +
** [[STM32 Black Pill]] - CPU card
 +
*** Preferred choice due to nearly unlimited resources
 +
** Previous CPU choices
 +
*** [[BLUE-PILL-HUB]]
 +
**** FTDI card required
 +
*** [[NANO-BKOUT]]
 +
* [[DIGIO32-I2C]] - 32-bits of Digital I/O for testing some cards
 +
* [[LED-32]] - 32 LEDS for bounce across LEDs tests
 +
* [[DB37RIBBON]] - DB-37 Male to right angle Ribbon cable header
 +
** DB-37 plugs into Test Station [[DIGIO32-I2C]]
 +
** Some UUT cards use a second [[DB37RIBBON]] card
 +
* [[DB25RIBBON]] - DB-25 Male or Female to Ribbon cable
 +
** Some UUT cards have DB-25 connectors
 +
* UUT cable sets
 +
** Connect to [[DB37RIBBON]], [[DB25RIBBON]], or [[LED-32]] cards in Test Station
 +
* PC running PuTTY
 +
** 9600 baud
 +
** USB-C cable
 +
*** USB connected to PC and USB-C connected to [[BLACK-PILL-HUB]]
 +
* Powered through the USB-C connector on the [[STM32 Black Pill]]
 +
 +
=== BLACK-PILL-HUB ===
 +
 +
[[FILE:Black-Pill-Hub_P1383-720px.jpg]]
 +
 +
<video type="youtube">3o0MC8F1onk</video>
 +
 +
=== LED-32 ===
 +
 +
[[FILE:LED-32-P426-720px.jpg]]
 +
 +
=== DIGIO32-I2C ===
 +
 +
[[FILE:DIGIO32-I2C-P232-720px.jpg]]
 +
 +
<video type="youtube">fiyauoZw_Y4</video>
 +
 +
== Personality EEPROM ==
 +
 +
* Tests cards without personality EEPROM
 +
* Tests cards with personality EEPROM
 +
** Personality EEPROM follows Raspberry Pi Hat EEPROM format
 +
** Test station writes EEPROM
 +
** Test station uses EEPROM contents (if present) to determine which test to run
 +
 +
=== Example Personality EEPROM - DIGIO-128 ===
 +
<pre>
 +
Reading EEPROM
 +
Family=ODAS
 +
Company=land-boards.com
 +
Product=DIGIO-128
 +
</pre>
 +
 +
== Black Pill Setup ==
 +
 +
=== Resources ===
 +
 +
* Plenty of resources
 +
** EEPROM - 524288 bytes
 +
** SRAM - 131072 bytes
 +
 +
<pre>
 +
Sketch uses 50316 bytes (9%) of program storage space. Maximum is 524288 bytes.
 +
Global variables use 3828 bytes (2%) of dynamic memory, leaving 127244 bytes for local variables. Maximum is 131072 bytes.
 +
</pre>
 +
 +
== Programming ==
 +
 +
=== Programming Setup ===
 +
 +
* Steps from [https://www.sgbotic.com/index.php?dispatch=pages.view&page_id=49 Programming|Program STM32 Black Pill (STM32F401 / F411) with Arduino IDE (Windows OS)]
 +
** Add the URL to Additional Board Manager URLs text box:
 +
*** https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json
 +
** Go to Tools > Board > Boards Manager
 +
** Search for STM32, select latest version and click Install.
 +
** Download and install STM32CubeProg from ST.com: [https://www.st.com/en/development-tools/stm32cubeprog.html]
 +
 +
=== DFU Programming ===
 +
 +
[[file:STM32F4-Black-Pill-Board-oriented.jpg]]
 +
 +
** Start the STM32CubeProg
 +
** From the Tools > Board > STM32 Board, select Generic STM32F4 series
 +
** Select Tools > Board Part Number > BlackPill F411CE
 +
** Under USB Support, select CDC (generic "Serial" supersede U(S)ART)
 +
** Under Upload method, select SMT32CubeProgrammer(DFU)
 +
** Use the onboard BOOT0 and NRST button to put the board into bootloader mode:
 +
*** press and hold the BOOT0 button
 +
*** press and release NRST (reset) button to power cycle the processor
 +
**** alternate is to press the Reset button on the [[BLACK-PILL-HUB]] card
 +
*** release BOOT0 button
 +
*** Sometimes removing the USB cable and plugging it back in while pressing BOOT0 button works better
 +
** Upload sketch
 +
 +
[[file:BlackPill_Config.png]]
 +
 +
* Displays in IDE
 +
 +
<pre>
 +
USB speed  : Full Speed (12MBit/s)
 +
Manuf. ID  : STMicroelectronics
 +
Product ID  : STM32  BOOTLOADER
 +
SN          : 348C35983539
 +
FW version  : 0x011a
 +
Device ID  : 0x0431
 +
Device name : STM32F411xC/E
 +
Flash size  : 512 KBytes (default)
 +
Device type : MCU
 +
Device CPU  : Cortex-M4
 +
 +
 +
 +
Memory Programming ...
 +
Opening and parsing file: ODASTESTER.ino.bin
 +
  File          : ODASTESTER.ino.bin
 +
  Size          : 49132 Bytes
 +
  Address      : 0x08000000
 +
 +
 +
Erasing memory corresponding to segment 0:
 +
Erasing internal memory sectors [0 2]
 +
erasing sector 0000 @: 0x08000000 done
 +
erasing sector 0001 @: 0x08004000 done
 +
erasing sector 0002 @: 0x08008000 done
 +
Download in Progress:
 +
 +
 +
File download complete
 +
Time elapsed during download operation: 00:00:02.263
 +
 +
RUNNING Program ...
 +
  Address:      : 0x8000000
 +
Start operation achieved successfully
 +
</pre>
 +
 +
=== Other Programming ===
 +
 +
* ST-LINK V2
 +
* [https://www.st.com/en/development-tools/flasher-stm32.html FLASHER-STM32] - STM32 Flash loader demonstrator (UM0462)
 +
* From [https://www.st.com/content/ccc/resource/technical/document/application_note/51/5f/03/1e/bd/9b/45/be/CD00264342.pdf/files/CD00264342.pdf/jcr:content/translations/en.CD00264342.pdf AN3155]
 +
[[File:SerialPropogramming (AN3155).PNG]]
 +
 +
== Useful Arduino Code ==
 +
 +
Here's some useful pieces of Arduino code
 +
 +
=== uint8_t checkI2CAddr(uint8_t addr) ===
 +
 +
<pre>
 +
////////////////////////////////////////////////////////////////////////////
 +
// uint8_t checkI2CAddr(uint8_t addr) - Check that an I2C device is present
 +
// Pass: addr - I2C address
 +
// Returns:
 +
//      0 : success
 +
//      1 : data too long to fit in transmit buffer
 +
//      2 : received NACK on transmit of address
 +
//      3 : received NACK on transmit of data
 +
//      4 : other error
 +
////////////////////////////////////////////////////////////////////////////
 +
 +
uint8_t checkI2CAddr(uint8_t addr)
 +
{
 +
  Wire.beginTransmission(addr);
 +
  return (Wire.endTransmission());
 +
}
 +
</pre>
 +
 +
=== uint8_t checkIfMCP23017(uint8_t addr)===
 +
 +
<pre>
 +
////////////////////////////////////////////////////////////////////////////
 +
//  uint8_t checkIfMCP23017(uint8_t addr)
 +
//  Check to see if the I2C part is a MCP23017
 +
//    The GPU Pullup A register (internal register address 0x0c) is present
 +
//    in a MCP23017 but not in a MCP23008.
 +
//  Pass: addr - I2C address
 +
//  Returns
 +
//    0 : Not an MCP23017
 +
//    1 : Likely an MCP23017
 +
////////////////////////////////////////////////////////////////////////////
 +
 +
uint8_t checkIfMCP23017(uint8_t addr)
 +
{
 +
  // Write 0x55 to MCP23017_GPPUA (0x0c)
 +
  Wire.beginTransmission(addr);
 +
  Wire.write(0x0c);
 +
  Wire.write(0x55);
 +
  Wire.endTransmission(1);
 +
  // Read back
 +
  Wire.beginTransmission(addr);
 +
  Wire.write(0x0c);
 +
  Wire.endTransmission();
 +
  Wire.requestFrom(addr,  1);
 +
  if (Wire.read() == 0x55)
 +
  {
 +
    Serial.println(F("Detected MCP23017"));
 +
    return 1;
 +
  }
 +
  else
 +
  {
 +
    Serial.println(F("Detected MCP23008"));
 +
    return 0;
 +
  }
 +
}
 +
 +
</pre>
 +
 +
== Cards Supported ==
 +
 +
Goal is to have automated tests for as many cards as possible. The currently tested cars are.
 +
 +
* [[DigIO16-I2C]] board
 +
* [[DIGIO-128]] board
 +
* [[OptoIn8-I2C]] board
 +
* [[OptoOut8-I2C]] board
 +
* [[DIGIO32-I2C]] board
 +
* [[PROTO16-I2C]] board
 +
* [[ODAS-PSOC5]] board
 +
* [[ODAS-RELAY-16]] board
 +
* [[DIGIO-128]]/64 board
 +
* [[I2CIO-8]] board
 +
* [[I2CIO-8X]] board
 +
* [[SWLEDX8-I2C]] board
 +
* [[OPTOFAST-2]]/[[OptoSmall]] Non-Inverting board
 +
* [[OPTOFAST-2]]/[[OptoSmall]] Inverting board
 +
* [[I2C-RPT]] board
 +
* [[I2C-RPT-08]] board
 +
* [[OptoFastBi]] board
 +
 +
=== Menu Options ===
 +
 +
<pre>
 +
Select the board type
 +
1 - DIGIO16-I2C board
 +
2 - DIGIO-128 board
 +
3 - OptoIn8-I2C board
 +
4 - OptoOut8-I2C board
 +
5 - DIGIO32-I2C board
 +
6 - PROTO16-I2C board
 +
7 - ODAS-PSOC5 board
 +
8 - ODAS-RELAY16 board
 +
A - DIGIO-128/64 board
 +
9 - TBD board
 +
X - Boards without EEPROMs
 +
Select board > X
 +
Select the board type
 +
1 - I2CIO8 board
 +
2 - I2CIO8X board
 +
3 - SWLEDX8-I2C board
 +
4 - OPTOFast/Small Non-Inverting board
 +
5 - OPTOFast/Small Inverting board
 +
6 - I2C-RPT-01 board
 +
7 - I2C-RPT-08 board
 +
8 - OptoFastBi board
 +
</pre>
 +
 +
== Cable Sets ==
 +
 +
[[FILE:ODTSTSTR_CBLS_P119_720pv.jpg]]
 +
 +
* Particular cable sets for cards
 +
* Bounce LED and Loopback to Test Station Cables
 +
 +
== Software ==
 +
 +
* [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards/ODAS/ODASTESTER ODAS Test Software Github Repo]
 +
* Bounce LEDs and loop test to [[DIGIO32-I2C]]

Revision as of 18:28, 21 March 2022

DIGIO32-I2C P1994 720px.jpg

Hardware

BLACK-PILL-HUB

Black-Pill-Hub P1383-720px.jpg

LED-32

LED-32-P426-720px.jpg

DIGIO32-I2C

DIGIO32-I2C-P232-720px.jpg

Personality EEPROM

  • Tests cards without personality EEPROM
  • Tests cards with personality EEPROM
    • Personality EEPROM follows Raspberry Pi Hat EEPROM format
    • Test station writes EEPROM
    • Test station uses EEPROM contents (if present) to determine which test to run

Example Personality EEPROM - DIGIO-128

Reading EEPROM
Family=ODAS
Company=land-boards.com
Product=DIGIO-128

Black Pill Setup

Resources

  • Plenty of resources
    • EEPROM - 524288 bytes
    • SRAM - 131072 bytes
Sketch uses 50316 bytes (9%) of program storage space. Maximum is 524288 bytes.
Global variables use 3828 bytes (2%) of dynamic memory, leaving 127244 bytes for local variables. Maximum is 131072 bytes.

Programming

Programming Setup

DFU Programming

STM32F4-Black-Pill-Board-oriented.jpg

    • Start the STM32CubeProg
    • From the Tools > Board > STM32 Board, select Generic STM32F4 series
    • Select Tools > Board Part Number > BlackPill F411CE
    • Under USB Support, select CDC (generic "Serial" supersede U(S)ART)
    • Under Upload method, select SMT32CubeProgrammer(DFU)
    • Use the onboard BOOT0 and NRST button to put the board into bootloader mode:
      • press and hold the BOOT0 button
      • press and release NRST (reset) button to power cycle the processor
      • release BOOT0 button
      • Sometimes removing the USB cable and plugging it back in while pressing BOOT0 button works better
    • Upload sketch

BlackPill Config.png

  • Displays in IDE
USB speed   : Full Speed (12MBit/s)
Manuf. ID   : STMicroelectronics
Product ID  : STM32  BOOTLOADER
SN          : 348C35983539
FW version  : 0x011a
Device ID   : 0x0431
Device name : STM32F411xC/E
Flash size  : 512 KBytes (default)
Device type : MCU
Device CPU  : Cortex-M4



Memory Programming ...
Opening and parsing file: ODASTESTER.ino.bin
  File          : ODASTESTER.ino.bin
  Size          : 49132 Bytes
  Address       : 0x08000000 


Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 2]
erasing sector 0000 @: 0x08000000 done
erasing sector 0001 @: 0x08004000 done
erasing sector 0002 @: 0x08008000 done
Download in Progress:


File download complete
Time elapsed during download operation: 00:00:02.263

RUNNING Program ... 
  Address:      : 0x8000000
Start operation achieved successfully

Other Programming

SerialPropogramming (AN3155).PNG

Useful Arduino Code

Here's some useful pieces of Arduino code

uint8_t checkI2CAddr(uint8_t addr)

////////////////////////////////////////////////////////////////////////////
// uint8_t checkI2CAddr(uint8_t addr) - Check that an I2C device is present
// Pass: addr - I2C address
// Returns:
//      0 : success
//      1 : data too long to fit in transmit buffer
//      2 : received NACK on transmit of address
//      3 : received NACK on transmit of data
//      4 : other error
////////////////////////////////////////////////////////////////////////////

uint8_t checkI2CAddr(uint8_t addr)
{
  Wire.beginTransmission(addr);
  return (Wire.endTransmission());
}

uint8_t checkIfMCP23017(uint8_t addr)

////////////////////////////////////////////////////////////////////////////
//  uint8_t checkIfMCP23017(uint8_t addr)
//  Check to see if the I2C part is a MCP23017
//    The GPU Pullup A register (internal register address 0x0c) is present
//    in a MCP23017 but not in a MCP23008.
//  Pass: addr - I2C address
//  Returns
//    0 : Not an MCP23017
//    1 : Likely an MCP23017
////////////////////////////////////////////////////////////////////////////

uint8_t checkIfMCP23017(uint8_t addr)
{
  // Write 0x55 to MCP23017_GPPUA (0x0c)
  Wire.beginTransmission(addr);
  Wire.write(0x0c);
  Wire.write(0x55);
  Wire.endTransmission(1);
  // Read back
  Wire.beginTransmission(addr);
  Wire.write(0x0c);
  Wire.endTransmission();
  Wire.requestFrom(addr,  1);
  if (Wire.read() == 0x55)
  {
    Serial.println(F("Detected MCP23017"));
    return 1;
  }
  else
  {
    Serial.println(F("Detected MCP23008"));
    return 0;
  }
}

Cards Supported

Goal is to have automated tests for as many cards as possible. The currently tested cars are.

Menu Options

Select the board type
1 - DIGIO16-I2C board
2 - DIGIO-128 board
3 - OptoIn8-I2C board
4 - OptoOut8-I2C board
5 - DIGIO32-I2C board
6 - PROTO16-I2C board
7 - ODAS-PSOC5 board
8 - ODAS-RELAY16 board
A - DIGIO-128/64 board
9 - TBD board
X - Boards without EEPROMs
Select board > X
Select the board type
1 - I2CIO8 board
2 - I2CIO8X board
3 - SWLEDX8-I2C board
4 - OPTOFast/Small Non-Inverting board
5 - OPTOFast/Small Inverting board
6 - I2C-RPT-01 board
7 - I2C-RPT-08 board
8 - OptoFastBi board

Cable Sets

ODTSTSTR CBLS P119 720pv.jpg

  • Particular cable sets for cards
  • Bounce LED and Loopback to Test Station Cables

Software

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:18, 19 March 2022Thumbnail for version as of 17:18, 19 March 2022720 × 632 (213 KB)Blwikiadmin (talk | contribs)

Metadata