Difference between revisions of "Screwduino"

From Land Boards Wiki
Jump to navigation Jump to search
Line 15: Line 15:
 
* 7-12V DC on standard 2.1mm DC power connector
 
* 7-12V DC on standard 2.1mm DC power connector
 
* Power selection jumper (FTDI, Regulator, Screw Terminals)
 
* Power selection jumper (FTDI, Regulator, Screw Terminals)
 +
 +
==Design Advantages ==
 +
 +
Gets away from all of the painful wire jumpers and pins that constantly come loose.
 +
Makes the step from prototype to final design much easier.
  
 
== Assembly Sheet ==
 
== Assembly Sheet ==
  
 
* [[Screwduino Assembly Sheet]]
 
* [[Screwduino Assembly Sheet]]

Revision as of 13:45, 10 January 2020

Tindie-mediums.png

ScrewduinoX4-5493-1365x663px.jpg

Features

  • Arduino UNO Compatible (Arduino bootloader)
  • ICSP header for program download
  • Standard 6-pin FTDI connector
  • 4-pin I2C connector
  • Reset switch
  • Other than power regulator only uses through-hole parts
  • 5mm pitch screw terminal blocks
  • Four (4) 4-40 mounting holes with clearance for screw heads, standoffs and/or nuts
  • 7-12V DC on standard 2.1mm DC power connector
  • Power selection jumper (FTDI, Regulator, Screw Terminals)

Design Advantages

Gets away from all of the painful wire jumpers and pins that constantly come loose. Makes the step from prototype to final design much easier.

Assembly Sheet