Workmanship

From blwiki
Jump to: navigation, search

Cleanliness

Clean up area.

CL-01-Area Needs Cleaning-P1040757-720PX.jpg

Return extra parts to kits

CL-02-Parts-Need-Put-Back-In-Kit-P1040758-720PX.jpg

Put away tools in coffee cups

CL-02-Tools-Need-Put-Away-P1040759-720PX.jpg

Throw away empty part carriers in trash

CL-03-Throw-out-used-plastic-tubes-paper-carriers-P1040765-720PX.jpg

Throw away empty part carriers in trash

CL-04-Throw-out-trash-P1040770-720PX.jpg

Throw away empty part carriers in trash

CL-05-Throw-out-waste-P1040771-720PX.jpg

Put cap on water - if it spills it's bad thing

CL-06-Cap-on-waterP1040776-720PX.jpg

Material Handling

Don't waste solder wick - use adjacent section without long spaces between

MT-01-Waste Solder Wick-P1040760-720PX.jpg

Alcohol cap has to be left on - evaporation and spills. Lid needs to be closed.

MT-02-Alcohol-Lid-Replaced-Also-Needs-Closed-P1040761-720PX.jpg

Tin Soldering tip before shutting off.

MT-04-Tin-Tip-P1040763-720PX.jpg

Tin both sides of iron tip.

MT-05-Tin-Both-Sides-of-Tip-P1040764-720PX.jpg

Make sure soldering iron is turned off when done

MT-03-Soldering-Iron-Turn-Off-P1040762-720PX.jpg

Return unused parts to tubes, kits, etc.

MT-06-Put-extra-parts-in-tubes-kits-P1040766-720PX.jpg

Return extra parts to specific bin

MT-07-Put-parts-in-bins-P1040769-720PX.jpg

Pick up material that falls on floor

MT-08-Pick-up-floor-droppings-P1040768-720PX.jpg

Snap lids of part bins - if they spill it is very time consuming

MT-09-Snap-lids-spill-bad-P1040767-720PX.jpg

Flux is $12 - make sure to put cap on otherwise it dries out

MT10-Recap-flux-P1040777-720PX.jpg

Return extra parts to bins

MT-11-Return-extras-to-bins-P1040772-720PX.jpg

Extra parts go back in kits

MT-12-Parts-back-in-kitsP1040774-720PX.jpg

Extra boards go back in kits

MT-13-Boards-to-kits-P1040775-720PX.jpg

Return extras to bins

MT-14-Return-extras-to-bins-P1040773-720PX.jpg

Workmanship

Header orientation vs silkscreen

WS-01-Wrong Header Installation Orientation.jpg

Added missing capacitors (small SMT parts)

WS-03 Missing Comp Added Caps.jpg

Missing 2 pin header

WS-04-Missing-header-P1040786-720PX.jpg

Board etch destroyed - board scrapped

WS-XX-Etch-cut-P1040787.jpg