Difference between pages "File:W7ZOI TIA SMT CAD.PNG" and "A Termination Insensitive Amplifier for Bidirectional Transceivers"

From Land Boards Wiki
(Difference between pages)
Jump to navigation Jump to search
(Blwikiadmin uploaded a new version of File:W7ZOI TIA SMT CAD.PNG)
 
 
Line 1: Line 1:
 +
[[file:TIA_P1015_720px.jpg]]
  
 +
== W7ZOI Design ==
 +
 +
* Paper - [http://w7zoi.net/bidirectional_matched_amplifier.pdf A Termination Insensitive Amplifier for Bidirectional Transceivers] - W7ZOI (Wes Hayward) design
 +
* [http://w7zoi.net/transistor_models_and_the_fba.pdf Transistor Models and the Feedback Amplifier]
 +
* Termination Insensitive - input impedance that does not depend upon the output load
 +
* Bi-directional - amplifiers in both directions
 +
* 50 ohms in/out
 +
* BNC or SMA Connectors
 +
* Transformer-less
 +
* Power applied to one half at a time - determines signal flow direction
 +
* ~30 mA per side
 +
* SMT or Through Hole versions
 +
* SMT version fits in aluminum case
 +
 +
=== W7ZOI Schematic ===
 +
 +
[[FILE:W7ZOI_SCHEMATIC.PNG]]
 +
 +
=== * Use ===
 +
 +
* Between RF/LO mixer (IF output/input) and crystal filter
 +
* Between Crystal Filter and Product Detector / Balanced Modulator
 +
 +
[[file:FARHADPNG.PNG]]
 +
 +
== Schematic in KiCAD ==
 +
 +
* Single channel
 +
* With SPICE directives
 +
 +
[[file:W7ZOI_SCHEMATIC_KiCAD.PNG]]
 +
 +
* Both channels
 +
* With SPICE directives
 +
 +
[[file:W7ZOI_SCHEMATIC_KiCAD-2.PNG]]
 +
 +
== NGSPICE Simulation ==
 +
 +
* NGSPICE run from KiCAD
 +
** [http://ngspice.sourceforge.net/ngspice-eeschema.html Tutorial: ngspice simulation in KiCad/Eeschema]
 +
* +24 dB @12V
 +
* 2N3904 Alternate Node Sequence (MMBT3903 - SOT23)
 +
** KiCAD order 1 2 3 is the SPICE normal order
 +
** NGSPICE order: 3 1 2
 +
 +
[[file:W7ZOI_Simulation_KiCAD-3.PNG]]
 +
 +
* Closely matches
 +
 +
[[file:W7ZOI_Gainz.PNG]]
 +
 +
* Across Band
 +
[[file:W7ZOI_Simulation_KiCAD_S2.PNG]]
 +
 +
== Measurements ==
 +
 +
* Powering only L-R side
 +
* 30 mA power supply current
 +
* 12V
 +
 +
=== NanoVNA Measurements ===
 +
 +
==== Left-to-right flow ====
 +
 +
* At 9 MHz
 +
 +
[[file:L-R_1-30MHz_meas.png]]
 +
 +
* S21 - sweep 1-30 MHz
 +
 +
[[file:L-R_1-30MHz_S21.png]]
 +
 +
* S11 VSWR - sweep 1-30 MHz
 +
 +
[[file:L-R_1-30MHz_S11.png]]
 +
 +
==== Right-to-Left flow ====
 +
 +
* At 9 MHz
 +
 +
[[file:R-L_1-30MHz_meas.png]]
 +
 +
* S21 - sweep 1-30 MHz
 +
 +
[[file:R-L__1-30MHz_S21.png]]
 +
 +
* S11 VSWR - sweep 1-30 MHz
 +
 +
[[file:R-L_1-30MHz_S11.png]]
 +
 +
== CAD ==
 +
 +
=== Through Hole CAD ===
 +
 +
[[FILE:W7ZOI_CAD.PNG]]
 +
 +
=== SMT CAD ===
 +
 +
[[FILE:W7ZOI_TIA_SMT_CAD.PNG]]
 +
 +
== Videos ==
 +
 +
<video type="youtube">JjcxEYk9atg</video>
 +
 +
<video type="youtube">CpQK0W7TY5g</video>
 +
 +
<video type="youtube">7TtKE39TWpI</video>
 +
 +
<video type="youtube">T8lq8Qtjqe0</video>
 +
 +
== Assembly Sheet ==
 +
 +
* [[W7ZOI TIA Assembly Sheet - Rev 1]] - Through-hole version
 +
* [[W7ZOI TIA SMT Assembly Sheet - Rev 1]] - SMT version

Revision as of 20:58, 25 March 2022

TIA P1015 720px.jpg

W7ZOI Design

W7ZOI Schematic

W7ZOI SCHEMATIC.PNG

* Use

  • Between RF/LO mixer (IF output/input) and crystal filter
  • Between Crystal Filter and Product Detector / Balanced Modulator

FARHADPNG.PNG

Schematic in KiCAD

  • Single channel
  • With SPICE directives

W7ZOI SCHEMATIC KiCAD.PNG

  • Both channels
  • With SPICE directives

W7ZOI SCHEMATIC KiCAD-2.PNG

NGSPICE Simulation

W7ZOI Simulation KiCAD-3.PNG

  • Closely matches

W7ZOI Gainz.PNG

  • Across Band

W7ZOI Simulation KiCAD S2.PNG

Measurements

  • Powering only L-R side
  • 30 mA power supply current
  • 12V

NanoVNA Measurements

Left-to-right flow

  • At 9 MHz

L-R 1-30MHz meas.png

  • S21 - sweep 1-30 MHz

L-R 1-30MHz S21.png

  • S11 VSWR - sweep 1-30 MHz

L-R 1-30MHz S11.png

Right-to-Left flow

  • At 9 MHz

R-L 1-30MHz meas.png

  • S21 - sweep 1-30 MHz

R-L 1-30MHz S21.png

  • S11 VSWR - sweep 1-30 MHz

R-L 1-30MHz S11.png

CAD

Through Hole CAD

W7ZOI CAD.PNG

SMT CAD

W7ZOI TIA SMT CAD.PNG

Videos

Assembly Sheet

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:48, 25 March 2022Thumbnail for version as of 18:48, 25 March 2022838 × 465 (34 KB)Blwikiadmin (talk | contribs)

You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://land-boards.com/blwiki/index.php?title=File:W7ZOI_TIA_SMT_CAD.PNG&oldid=12114"