Difference between revisions of "STM32"

Latest revision as of 12:04, 6 February 2021

Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.
Upper right pin is GND on Blue pill card, but is 5V on Black pill card
Reset is on a different pin
Some IO pins are om different spots

@@ Line 6: / Line 6: @@
 * [[STM32 Black Pill]] Board
-=== Blue Pill vs Black Pill Pinout ===
+== Blue Pill vs Black Pill Pinout ==
 * '''Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.'''
@@ Line 14: / Line 14: @@
 [[File:Blue-vs-Black-Pill-Pin-Layout.png]]
-== Blue Pill Card Boot Jumpers ==
-[[File:BootJumpers.PNG]]
-=== Annotated ===
-[[File:STM32-Annotated.jpg]]
-== Mechanicals ==
-=== Blue Pill Mechanicals ===
-[[File:STM32-Mechanicals-2.jpg]]
-=== Black Pill Mechanicals ===
-[[File:original-dimensions-STM32F401CCU6_WeAct_Black_Pill_V1.2.png]]
-== Schematic  ==
-=== Blue Pill Card Schematic ===
-[[File:STM32-Schematic.jpg]]
-=== Black Pill Card Schematic ===
-[https://github.com/land-boards/lb-boards/blob/master/Arduino%20Cards/Black-Pill-Hub/Documents/BlackPillBoard/MiniF4x1Cx_V30%20SchDoc.pdf Schematic]