Difference between revisions of "Front Panel For 8 Bit Computers"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/front-panel-for-some-microprocessors-pcb-only/]] | [[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/front-panel-for-some-microprocessors-pcb-only/]] | ||
| + | |||
| + | <video type="youtube">WupSfpHNN78</video> | ||
== Front Panel for 8-Bit Microprocessors == | == Front Panel for 8-Bit Microprocessors == | ||
Revision as of 02:49, 30 December 2019
Front Panel for 8-Bit Microprocessors
Features
It has these features. They may not fit your generic design. Especially since this card has to have an I2C interface.
- I2C interface (Two Wire interface - plus power and ground)
- Occupy I2C addresses either 0x20-0x23 or 0x24-0x27
- Jumper selectable base address
- Jumper Selectable I2C terminators
- I2C daisy-chain connector
- 4 MCP23017 16-bit I2C Port Expanders
- These are fine pitch surface mount parts
- 32 Pushbutton Switches
- 32 LEDs
Schematic
Drivers
- I2C parts are standard MCP23017 drivers which are supported in Arduino and most microprocessors
- PSoC driver GitHub Repo
