Difference between revisions of "I2C-RPT-08"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 32: | Line 32: | ||
* [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CRPT08 Github repo] - Driver code | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CRPT08 Github repo] - Driver code | ||
* [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards/I2CRPT08 Github repo] - Example code | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards/I2CRPT08 Github repo] - Example code | ||
+ | |||
+ | == Testing == | ||
+ | |||
+ | * [[Arduino Based Test Station]] | ||
+ | * Connects directly to I2C port on the [[Blue Pill Hub]] | ||
+ | ** I2C address offset = 0x0 | ||
+ | ** [[Blue Pill Hub]] is set to offset=0x1 so it does not conflict | ||
+ | ** Uses 8x of [[I2CIO-8]] cards | ||
+ | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards/ODAS/ODASTESTER ODAS Tester Github Repo] | ||
+ | |||
+ | [[File:I2C_RPT_Test_I6075_720px.jpg]] | ||
== Assembly Sheet == | == Assembly Sheet == | ||
* [[I2C-RPT-08 Assembly Sheet]] | * [[I2C-RPT-08 Assembly Sheet]] |
Revision as of 13:55, 1 January 2020
Features
- I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer
- Eight I2C Ports
- Host port
- Controlled via I2C
- 3.3V or 5V host operation
- 3.3V or 5V slave ports operation
- Voltage translation between the ports
- A Raspberry PI which runs 3.3V can control an I2C device which runs at 5V
- Interrupt line on each channel and host
- 100KHz/400KHz operation
- On-board termination resistors
- 49x49mm form factor
- 4 solid 4-40 mounting holes
- Arduino Based Test Station
- Connects directly to I2C port on the Blue Pill Hub
- I2C address offset = 0x0
- Blue Pill Hub is set to offset=0x1 so it does not conflict
- Uses 8x of I2CIO-8 cards
- ODAS Tester Github Repo
Drivers/Example Code
- Github repo - Driver code
- Github repo - Example code
Testing
- Arduino Based Test Station
- Connects directly to I2C port on the Blue Pill Hub
- I2C address offset = 0x0
- Blue Pill Hub is set to offset=0x1 so it does not conflict
- Uses 8x of I2CIO-8 cards
- ODAS Tester Github Repo