Difference between revisions of "Main Page"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 99: | Line 99: | ||
* [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards Arduino Drivers] | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards Arduino Drivers] | ||
* [https://github.com/land-boards/RasPi Raspberry Pi Python Drivers] | * [https://github.com/land-boards/RasPi Raspberry Pi Python Drivers] | ||
| + | ( [https://github.com/land-boards/PiCluster/tree/master/ExampleCode Raspberry Pi Python Cluster Code] | ||
* [https://github.com/land-boards/lb-Python-Code/tree/master/MicroPython MicroPython Drivers] | * [https://github.com/land-boards/lb-Python-Code/tree/master/MicroPython MicroPython Drivers] | ||
* [https://github.com/land-boards/BBB BeagleBone Python Drivers] | * [https://github.com/land-boards/BBB BeagleBone Python Drivers] | ||
Revision as of 23:38, 7 January 2020
Contents
Land Boards Cards
Analog Cards
- UNI-OPAMP-08 - Universal 8 channel Op Amp
- SPI-POTX2 - Dual Digital Potentiometer
- HVDigitalPot - High Voltage Digital Pot
- HVDigitalPot2 - High Voltage Digital Pot
- HVDigitalPot2F - High Voltage Digital Pot
- NewPot2 - Rotary Switch potentiometer replacement
- RF-Amp - RF Amplifier
Arduino Cards
- BLUE-PILL-HUB - Blue Pull Board I2C Hub
- GVSDuino _ Arduino UNO clone
- TinyGrid85 - ATTiny85 Prototype
- NANO-BKOUT - Arduino Nano Breakout
- Screwduino - Arduino with screw terminals
- FTDI-USB-RS-232 - USB to RS-232 converter
- FTDI-USB-TTL - USB to TTL converter
- GVS-32U4 - Arduino Leonardo compatible
- Tiny85ISP - ATTiny85 Programmer
- MyMenu - OLED with menu switches
BeagleBone Cards
- BBB-GVS- BeagleBone Sensor Connection Cape
- BBB-GVS-3 - BeagleBone Sensor Connection Cape
- BBB-COMMS-2 - BeagleBone Sensor Connection Cape
Digital I/O Cards
- DIGIO-128 - 128-bit Digital I/O Card
- DIGIO32-I2C - 32-bit Digital I/O Card
- DigIO16-I2C - 16-bit Digital I/O Card with prototyping area
- Front Panel For 8 Bit Computers - Front Panel for 8-bit Microprocessors with I2C interfaces
- I2CIO-8X - 8-bit I2C I/O based on the MCP23008
- I2CIO-8 - 8-bit I2C I/O based on the MCP23008
- I2C-TEMP - I2C Temperature Sensor
- I2C-RPT - 4-Channel I2C Multiplexer/Repeater
- I2C-RPT-08 - 8-channel I2C Multiplexer/Repeater
- VGAX49 - VGA Digital Connection (2:2:2)
- TinyPS2 - PS/2 keyboard or mouse to TTL Level Serial converter
- PS2X49 - PS/2 keyboard/mouse interface
- Proto16-I2C - 16-bit I/O with prototyping area
ESP Cards
- ESP32-I2C-HUB - ESP32 Breakout board with I2C Hub
- ESP-32-VGA - VGA on the ESP32
FPGA Cards
- EP2C5-DB - FPGA card
- RETRO-EP4 - FPGA card
- RETRO-EP4CE15 - FPGA card
LED Cards
- LED-32 - 32 LEDs
Opto Isolator Cards
- OPTOFAST - 4 channel optocoupler card
- OptoSmall - 4 channel optocoupler card
- OPTOUSB - Opto coupled USB to FTDI Interface
- OptoFastBi - 2 Optocouplers in both directions
Raspberry Pi Cards
- RPI-I2C-HUB - 4 channel I2C Multiplexer for the Raspberry Pi
- RPP-UIO-16 - I/O Hat for the Raspberry Pi
- RasPi-GVS - I/O Card for the Raspberry Pi
- RPI-CONSOLE-U - Raspberry Pi Console Card (Micro USB)
- RPI-CONSOLE - Raspberry Pi Console Card (Mini USB)
- RPI-MDI - Raspberry Pi Servo Card
- RPPSOC - Raspberry Pi Programmable System on a Chip
- RASPI-PLUS-GVS-CFG - Raspberry Pi B+ Sensor Conn. Hat
- RASPI-PLUS-GVS - Raspberry Pi B+ Sensor Conn. Hat
- RPI_PSOC5 - Raspberry Pi "Clone"
Test Equipment
- PulseGen - Fast Pulse Generator - TDR
- DB25RIBBON - DB-25 to Ribbon Cable Adapter Card
- DB37RIBBON - DB-37 to Ribbon Cable Adapter Card
Drivers
( Raspberry Pi Python Cluster Code
Board Test Stations
Contact Us
Please contact us if you are looking for data on a card you purchased at support@land-boards.com .
