Difference between revisions of "Main Page"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 83: | Line 83: | ||
<video type="youtube">BBPH98ODq6k</video> | <video type="youtube">BBPH98ODq6k</video> | ||
| − | * [[EP2C5-DB]] - Cyclone II FPGA card | + | * [[EP2C5-DB]] - Cyclone II FPGA card |
| − | * [[BASE-EP4CE6]] - Cyclone IV FPGA Card | + | ** Used with [[Cyclone_II_EP2C5_Mini_Dev_Board|Cyclone II EP2C5 Mini Dev Board]] |
| − | * [[RETRO-EP4]] - Cyclone IV FPGA Card | + | * [[BASE-EP4CE6]] - Cyclone IV FPGA Card |
| − | * [[RETRO-EP4CE15]] - Cyclone IV or Cyclone V card | + | ** Used with [https://www.waveshare.com/wiki/CoreEP4CE6 WaveShare CoreEP4CE6 EP4CE6E22C8N FPGA Board] |
| − | * [[EP4 FPGA BREAKOUT]] - Breakout card | + | * [[RETRO-EP4]] - Cyclone IV FPGA Card |
| − | + | ** Used with [https://www.waveshare.com/wiki/CoreEP4CE6 WaveShare CoreEP4CE6 EP4CE6E22C8N FPGA Board] | |
| − | + | * [[RETRO-EP4CE15]] - Cyclone IV or Cyclone V card | |
| − | + | ** Used with [[QMTECH EP4CE15 FPGA Card]] or | |
| − | + | ** [[QM_Tech_Cyclone_V_FPGA_Board|QMTECH 5CEFA2F23 FPGA Card]] | |
| − | + | * [[EP4 FPGA BREAKOUT]] - Breakout card | |
| − | + | ** Used with [[A-C4E6_Cyclone_IV_FPGA_EP4CE6E22C8N_Development_Board|A-C4E6 Cyclone IV FPGA EP4CE6E22C8N]] or[[A-C4E10_Cyclone_IV_FPGA_EP4CE10E22C8N_Development_Board|A-C4E10 Cyclone IV FPGA EP4CE10E22C8N]] Development Boards | |
| − | |||
| − | |||
==== Off-the-Shelf FPGA Cards ==== | ==== Off-the-Shelf FPGA Cards ==== | ||
Revision as of 14:03, 15 August 2020
Land Boards Cards
Analog Cards
- AudioAmp384 - 5 W Audio Amplifier
- AudioAmp386 - 3/4 W Audio Amplifier
- HVDigitalPot - High Voltage Digital Pot
- HVDigitalPot2 - High Voltage Digital Pot
- HVDigitalPot2F - High Voltage Digital Pot
- IntegTheremin - Integrated Theremin
- NewPot2 - Rotary Switch potentiometer replacement
- RF-Amp - RF Amplifier
- SPI-POTX2 - Dual Digital Potentiometer
- UNI-OPAMP-08 - Universal 8 channel Op Amp
- XR2206 - Exar Function Generator set up to do sine waves
Arduino Cards
- ATProgHead - AVR programming head (for use with the GVSDuino)
- BLUE-PILL-HUB - Blue Pull Board I2C Hub
- FTDI-49MM - FTDI
- FTDI-USB-RS-232 - USB to RS-232 converter
- FTDI-USB-TTL - USB to TTL converter
- GVSDuino _ Arduino UNO clone
- GVS-32U4 - Arduino Leonardo compatible
- MiniDuino - Arduino UNO compatible with convenient headers
- MyMenu - OLED with menu switches
- NANO-BKOUT - Arduino Nano Breakout
- Screwduino - Arduino with screw terminals
- TinyDuino85 - ATTiny85 board
- TinyGrid85 - ATTiny85 Prototype
- Tiny85ISP - ATTiny85 Programmer
- UNO-DB25 - Arduino UNO mount board with DB-25 connector (ODAS compatible form factor)
BeagleBone Cards
- BBB-COMMS-2 - BeagleBone Sensor Connection Cape
- BBB-GVS- BeagleBone Sensor Connection Cape
- BBB-GVS-3 - BeagleBone Sensor Connection Cape
Digital I/O Cards
- CARRIER95TO49MM - Adapt 49mm to 95mm cards
- DCE - RS-232 TTL
- DTE - RS-232 TTL
- DIGIO-128 - 128-bit Digital I/O Card
- DIGIO32-I2C - 32-bit Digital I/O Card
- DigIO16-I2C - 16-bit Digital I/O Card
- Front Panel For 8 Bit Computers - Front Panel for 8-bit Microprocessors with I2C interfaces
- I2CIO-8X - 8-bit I2C I/O based on the MCP23008
- I2CIO-8 - 8-bit I2C I/O based on the MCP23008
- I2C-TEMP - I2C Temperature Sensor
- I2C-RPT - 4-Channel I2C Multiplexer/Repeater
- I2C-RPT-08 - 8-channel I2C Multiplexer/Repeater
- ODAS-RELAY-16 - 16 Channel Relay Card
- PROTO16-I2C - 16-bit I/O with prototyping area
- PS2X49 - PS/2 keyboard/mouse interface
- SWLEDX8 - 8 Switches and 8 LEDs
- SWLEDX8-I2C - 16 bit I2C connection to SWLEDX8 card
- TinyPS2 - PS/2 keyboard or mouse to TTL Level Serial converter
- VGAX49 - VGA Digital Connection (2:2:2 or 5:6:5)
- SD_CARD_X49 = SD Card Adapter
ESP Cards
- ESP32-I2C-HUB - ESP32 Breakout board with I2C Hub
- ESP32-VGA - VGA on the ESP32
FPGA Cards
- EP2C5-DB - Cyclone II FPGA card
- Used with Cyclone II EP2C5 Mini Dev Board
- BASE-EP4CE6 - Cyclone IV FPGA Card
- RETRO-EP4 - Cyclone IV FPGA Card
- RETRO-EP4CE15 - Cyclone IV or Cyclone V card
- Used with QMTECH EP4CE15 FPGA Card or
- QMTECH 5CEFA2F23 FPGA Card
- EP4 FPGA BREAKOUT - Breakout card
- Used with A-C4E6 Cyclone IV FPGA EP4CE6E22C8N orA-C4E10 Cyclone IV FPGA EP4CE10E22C8N Development Boards
Off-the-Shelf FPGA Cards
- zrTech V2 Cyclone IV FPGAEP4CE6E22C8N Development Board USB V2]
- A-C4E6 Cyclone IV FPGA EP4CE6E22C8N Development Board
- A-C4E10 Cyclone IV FPGA EP4CE10E22C8N Development Board
- A-ESTF V2 EP4CE22 Board
- DE0-Nano Board
GVS Cards
- DS18S20 - One Wire Temperature Sensor
- DS18S20-LDR - One Wire Temperature Sensor plus Light Dependent Resistor (LDR) Sensor
- GVS-Switch - Switch
- GVSUNI - Universal GVS Sensor card
- IR_Sensor - Infrared Sensor
- IRSens-2 - Infrared Sensor v2
- LDRSensor - Light Dependent Resistor (LDR)Sensor
- Sw5Way - A 5 way switch on a single analog input line
- Sw5-2 - A discrete 5 way switch on a single analog input line
Ham Radio
- ANTUNER - Antenna Tuner
- FM-NOTCH Filter
- Software Defined Radio (SDR)
LED Cards
- CCLED - Constant Current 1W LED card
- LED-32 - 32 LEDs
- LED-TEST-2 - Test outputs with a card that has 16 LEDs on it
- LED-Test - Test outputs with a card that has 16 LEDs on it
- LED1W - 1W LED card
- LED1W4X - 4X 1W LED card
Opto Isolator Cards
- OPTOFAST-2 - 4 channel optocoupler card
- OPTOFAST - 4 channel optocoupler card
- OptoSmall - 4 channel optocoupler card
- OPTOUSB - Opto coupled USB to FTDI Interface
- OptoFastBi - 2 Optocouplers in both directions
- OptoIn8-I2C - Eight Channel Optically Isolated Input Card
- OptoOut8-I2C - Eight Channel Optically Isolated Output Card
Power Cards
- BrBdPwrSply - Breadboard Power Supply
- PowerDistrib - Power Distribution card
- POWER-49MM - Power Distribution card
- PwrSply317 - Adjustable Power Supply - a true classic
- PWR-BLK-01 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
- PWR-BLK-02 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
- PWR-BLK-03 - USB LiPo charger plus 5V Switching Mode Power Supply
- USB-POWER - USB 5V Switching Mode Power Supply
Raspberry Pi Cards
| Documentation | Function | 3.3V GPIO | 5V GPIO | Compatible with |
|---|---|---|---|---|
| RasPi-GVS | GVS card | 0 | 16 | All Raspberry Pi Models |
| RPP-UIO-16 | GVS card 3.3V/5V | 26 | 0-16 | Raspberry Pi Models A+, B+, Pi 2 |
| RASPI-PLUS-GVS | GVS card 5V | 9 | 16 | Raspberry Pi Models A+, B+, Pi 2 |
| RASPI-PLUS-GVS-CFG | Configurable GVS hat | 26 | 0-8 | Raspberry Pi Models A+, B+, Pi 2 |
| RPIO-TINY | GVS card | 17 | 0 | All Raspberry Pi Models |
| RPIO-TINY-2 | GVS card | 17 | 0-8 | All Raspberry Pi Models |
| RPIO-TINY-3 | GVS card | 17 | 0 | All Raspberry Pi Models |
| RPI-MDI | Servo card | 3 | 0 | All Raspberry Pi Models |
| RPI-CONSOLE | Console extender card (Mini USB) | N/A | N/A | All Raspberry Pi Models |
| RPI-CONSOLE-U | Console extender card (Micro USB) | N/A | N/A | All Raspberry Pi Models |
| RPI-I2C-HUB | I2C Hub/repeater/level translator card | N/A | N/A | All Raspberry Pi Models |
| RPPSOC | Programmable System On a Chip | N/A | N/A | Raspberry Pi Models A+, B+, Pi 2, Pi 3 |
| RPI-PWR | Raspberry Pi Recessed Power Card | N/A | N/A | All Raspberry Pi Models |
| PIATX | Raspberry Pi <> ATX Case Connections | N/A | N/A | All Raspberry Pi Models |
| PC-Case-USB | ATX Case USB Connections | N/A | N/A | All Raspberry Pi Models |
| RPI_PSOC5 | Raspberry Pi "Clone" | N/A | N/A | All Raspberry Pi Models |
Test Equipment
- PulseGen - Fast Pulse Generator - TDR
- DB25RIBBON - DB-25 to Ribbon Cable Adapter Card
- DB37RIBBON - DB-37 to Ribbon Cable Adapter Card
- CCLOAD-01 - Constant current load
- DiffProbe - Differential Oscilloscope Probe
- FTDIBkout - FTDI Breakout for debugging 6 pin FTDI connections
- IReflow - IR Reflow Oven Controller
- TinyOptoProbe - Optocoupled Logic probe
- VREF4096 - 4.096 Voltage Reference
Drivers
- Arduino Drivers
- Raspberry Pi Python Drivers
- Raspberry Pi Python Cluster Code
- MicroPython Drivers
- BeagleBone Python Drivers
Board Test Stations
Contact Us
Please contact us if you are looking for data on a card you purchased at support@land-boards.com .
