Difference between revisions of "Main Page"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 18: | Line 18: | ||
* [[NANO-BKOUT]] - Arduino Nano Breakout card | * [[NANO-BKOUT]] - Arduino Nano Breakout card | ||
* [[Screwduino]] - Arduino with screw terminals | * [[Screwduino]] - Arduino with screw terminals | ||
| − | |||
| − | |||
=== BeagleBone Cards === | === BeagleBone Cards === | ||
| Line 43: | Line 41: | ||
* [[TinyPS2]] - PS/2 keyboard or mouse to TTL Level Serial converter | * [[TinyPS2]] - PS/2 keyboard or mouse to TTL Level Serial converter | ||
* [[PS2X49]] - PS/2 keyboard/mouse interface | * [[PS2X49]] - PS/2 keyboard/mouse interface | ||
| + | |||
| + | === ESP Cards === | ||
| + | |||
| + | * [[ESP32-I2C-HUB]] - ESP32 Breakout board with I2C Hub | ||
| + | * [[ESP-32-VGA]] - VGA on the ESP32 | ||
=== FPGA Cards === | === FPGA Cards === | ||
Revision as of 13:52, 4 January 2020
Contents
Land Boards Cards
Analog Cards
- UNI-OPAMP-08 - Universal 8 channel Op Amp
- SPI-POTX2 - Dual Digital Potentiometer
- HVDigitalPot - High Voltage Digital Pot
Arduino Cards
- Blue Pill Hub - Blue Pull Board I2C Hub
- GVSDuino _ Arduino UNO clone
- TinyGrid85 - ATTiny85 Prototype card
- NANO-BKOUT - Arduino Nano Breakout card
- Screwduino - Arduino with screw terminals
BeagleBone Cards
- BBB-GVS- BeagleBone Sensor Connection Cape
- BBB-GVS-3 - BeagleBone Sensor Connection Cape
- BBB-COMMS-2 - BeagleBone Sensor Connection Cape
Digital I/O Cards
- DIGIO-128 - 128-bit Digital I/O Card
- DIGIO32-I2C - 32-bit Digital I/O Card
- DigIO16-I2C - 16-bit Digital I/O Card with prototyping area
- Front Panel For 8 Bit Computers - Front Panel for 8-bit Microprocessors with I2C interfaces
- I2CIO-8X - 8-bit I2C I/O based on the MCP23008
- I2CIO-8 - 8-bit I2C I/O based on the MCP23008
- I2C-TEMP - I2C Temperature Sensor
- I2C-RPT - 4-Channel I2C Multiplexer/Repeater
- I2C-RPT-08 - 8-channel I2C Multiplexer/Repeater
- VGAX49 - VGA Digital Connection (2:2:2)
- TinyPS2 - PS/2 keyboard or mouse to TTL Level Serial converter
- PS2X49 - PS/2 keyboard/mouse interface
ESP Cards
- ESP32-I2C-HUB - ESP32 Breakout board with I2C Hub
- ESP-32-VGA - VGA on the ESP32
FPGA Cards
- EP2C5-DB - FPGA card
- RETRO-EP4 - FPGA card
- RETRO-EP4CE15 - FPGA card
LED Cards
- LED-32 - 32 LEDs
Opto Isolator Cards
- OPTOFAST - 4 channel optocoupler card
- OptoSmall - 4 channel optocoupler card
- OPTOUSB - Opto coupled USB to FTDI Interface
- OptoFastBi - 2 Optocouplers in both directions
Raspberry Pi Cards
- RPI-I2C-HUB - 4 channel I2C Multiplexer for the Raspberry Pi
- RPP-UIO-16 - I/O Hat for the Raspberry Pi
- RasPi-GVS - I/O Card for the Raspberry Pi
- RPI-CONSOLE-U - Raspberry Pi Console Card (Micro USB)
- RPI-CONSOLE - Raspberry Pi Console Card (Mini USB)
- RPI-MDI - Raspberry Pi Servo Card
- RPPSOC - Raspberry Pi Programmable System on a Chip
- RASPI-PLUS-GVS-CFG - Raspberry Pi B+ Sensor Conn. Hat
- RPI_PSOC5 - Raspberry Pi "Clone"
Test Equipment
- PulseGen - Fast Pulse Generator - TDR
- DB25RIBBON - DB-25 to Ribbon Cable Adapter Card
- DB37RIBBON - DB-37 to Ribbon Cable Adapter Card
Drivers
Board Test Stations
Contact Us
Please contact us if you are looking for data on a card you purchased at support@land-boards.com .
