QMTECH EP4CE55 FPGA Card

From Land Boards Wiki
Jump to navigation Jump to search

P913-cropped-512pxV.jpg.jpg

Features

EP4CE55 Resources.PNG

Switches/Indications

  • Power LED - D4
  • User LED - D5 - FPGA Pin_E4
  • KEY0 - SW1 - FPGA Pin_W13
  • KEY1 - SW2 - FPGA Pin_Y13
  • nCONFIG - SW3
  • JP5 - 5V

Jumpers

  • J2 - JTAG

Connectors

U7

U7 io CONN.PNG

U8

U8 io CONN.PNG

Programming the FPGA EEPROM

  • File
  • Convert Programming File
  • Configuration Device = EPCQ64
  • Mode = Active Serial
  • Programming File Type: *.jic
  • Advanced = Check both Disables...
  • Select Flash Loader
  • Add Device = Cyclone IV and EP4CE15
  • Select SOF Data
  • Select Add File and select the .sof file
  • Generate
  • In Tools, Programmer
  • Add file and select the .jic file
  • Select Program/Configure
  • Takes a while to program
  • Press button near VGA

Pages

Mechanicals

QMTECH FPGA EP4CE15.jpg

Pin List

set_location_assignment PIN_T2 -to i_CLOCK_50
set_location_assignment PIN_W13 -to n_reset
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset
set_location_assignment PIN_R1 -to ps2Clk
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Clk
set_location_assignment PIN_R2 -to ps2Data
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Data
set_location_assignment PIN_C22 -to serSelect
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to serSelect
set_location_assignment PIN_A10 -to cts1
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to cts1
set_location_assignment PIN_A13 -to rts1
set_location_assignment PIN_B10 -to rxd1
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rxd1
set_location_assignment PIN_B13 -to txd1
set_location_assignment PIN_B17 -to videoB0
set_location_assignment PIN_A17 -to videoB1
set_location_assignment PIN_B16 -to videoG0
set_location_assignment PIN_A16 -to videoG1
set_location_assignment PIN_B20 -to videoR0
set_location_assignment PIN_A15 -to videoR1
set_location_assignment PIN_B18 -to hSync
set_location_assignment PIN_A18 -to vSync
set_location_assignment PIN_F1 -to n_sRamCS
set_location_assignment PIN_B4 -to n_sRamWE
set_location_assignment PIN_J2 -to n_sRamOE
set_location_assignment PIN_E1 -to sramData[0]
set_location_assignment PIN_C1 -to sramData[1]
set_location_assignment PIN_B1 -to sramData[2]
set_location_assignment PIN_B3 -to sramData[3]
set_location_assignment PIN_B2 -to sramData[4]
set_location_assignment PIN_C2 -to sramData[5]
set_location_assignment PIN_D2 -to sramData[6]
set_location_assignment PIN_F2 -to sramData[7]
set_location_assignment PIN_H1 -to sramAddress[0]
set_location_assignment PIN_J1 -to sramAddress[1]
set_location_assignment PIN_M1 -to sramAddress[2]
set_location_assignment PIN_N1 -to sramAddress[3]
set_location_assignment PIN_A8 -to sramAddress[15]
set_location_assignment PIN_A7 -to sramAddress[14]
set_location_assignment PIN_A6 -to sramAddress[13]
set_location_assignment PIN_A5 -to sramAddress[12]
set_location_assignment PIN_C3 -to sramAddress[11]
set_location_assignment PIN_A4 -to sramAddress[10]
set_location_assignment PIN_A3 -to sramAddress[9]
set_location_assignment PIN_H2 -to sramAddress[8]
set_location_assignment PIN_M2 -to sramAddress[7]
set_location_assignment PIN_N2 -to sramAddress[6]
set_location_assignment PIN_P2 -to sramAddress[5]
set_location_assignment PIN_P1 -to sramAddress[4]
set_location_assignment PIN_B5 -to sramAddress[18]
set_location_assignment PIN_B6 -to sramAddress[17]
set_location_assignment PIN_B7 -to sramAddress[16]
# SDRAM
set_location_assignment PIN_Y6 -to sdRamClk
set_location_assignment PIN_W6 -to sdRamClkEn
set_location_assignment PIN_AA4 -to n_sdRamCas
set_location_assignment PIN_AA3 -to n_sdRamCe
set_location_assignment PIN_AB3 -to n_sdRamRas
set_location_assignment PIN_AB4 -to n_sdRamWe
set_location_assignment PIN_V2 -to sdRamAddr[0]
set_location_assignment PIN_V1 -to sdRamAddr[1]
set_location_assignment PIN_U2 -to sdRamAddr[2]
set_location_assignment PIN_U1 -to sdRamAddr[3]
set_location_assignment PIN_V3 -to sdRamAddr[4]
set_location_assignment PIN_V4 -to sdRamAddr[5]
set_location_assignment PIN_Y2 -to sdRamAddr[6]
set_location_assignment PIN_AA1 -to sdRamAddr[7]
set_location_assignment PIN_Y3 -to sdRamAddr[8]
set_location_assignment PIN_V5 -to sdRamAddr[9]
set_location_assignment PIN_W1 -to sdRamAddr[10]
set_location_assignment PIN_Y4 -to sdRamAddr[11]
set_location_assignment PIN_V6 -to sdRamAddr[12]
set_location_assignment PIN_Y1 -to sdRamAddr[13]
set_location_assignment PIN_W2 -to sdRamAddr[14]
set_location_assignment PIN_AA10 -to sdRamData[0]
set_location_assignment PIN_AB9 -to sdRamData[1]
set_location_assignment PIN_AA9 -to sdRamData[2]
set_location_assignment PIN_AB8 -to sdRamData[3]
set_location_assignment PIN_AA8 -to sdRamData[4]
set_location_assignment PIN_AB7 -to sdRamData[5]
set_location_assignment PIN_AA7 -to sdRamData[6]
set_location_assignment PIN_AB5 -to sdRamData[7]
set_location_assignment PIN_Y7 -to sdRamData[8]
set_location_assignment PIN_W8 -to sdRamData[9]
set_location_assignment PIN_Y8 -to sdRamData[10]
set_location_assignment PIN_V9 -to sdRamData[11]
set_location_assignment PIN_V10 -to sdRamData[12]
set_location_assignment PIN_Y10 -to sdRamData[13]
set_location_assignment PIN_W10 -to sdRamData[14]
set_location_assignment PIN_V11 -to sdRamData[15]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hSync
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to n_reset
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ps2Clk
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ps2Data
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoB0
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoB1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoG0
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoG1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoR0
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to videoR1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to vSync
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to rts1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to rxd1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to txd1
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to n_sRamCS
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to n_sRamOE
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to n_sRamWE
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramData[7]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[7]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[8]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[15]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[14]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[13]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[10]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[9]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[11]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[12]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[16]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[17]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sramAddress[18]