SSB6 Assembly Sheet

From Land Boards Wiki
Jump to navigation Jump to search

SSB6 PCB.PNG

Parts List - 2500 Hz

Qty Value RefDes Qty Value RefDes
2 10pF C1,C11 2 BNC, Rt angle (Note 1) J1,J2
2 120pF C2,C10 2 SMA, Edge launch (Note 1) P1,P2
2 82pF C3,C9 2 Toroid, FT37-43 (Note 2) T1,T2
3 100pF C4,C6,C8 6 9 MHz crystal (Note 3) Y1-Y6
2 470pF C5,C7

Notes

  1. Install either BNC or SMA
  2. T1, T2 are 10 bifilar 28 AWG turns on FT37-43 toroid
  3. Match crystals within 250 Hz (easy when you start with 50 crystals

Parts List - 2000 Hz

  • Capacitor values are "odder"
    • Not standard values for some
    • May need to parallel caps
    • Could put parallel caps on the bottom
Qty Value RefDes Qty Value RefDes
2 47pF C1,C11 2 BNC, Rt angle (Note 1) J1,J2
2 360pF C2,C10 2 SMA, Edge launch (Note 1) P1,P2
2 100pF C3,C9 2 Toroid, FT37-43 (Note 2) T1,T2
3 133pF C4,C6,C8 6 9 MHz crystal (Note 3) Y1-Y6
2 400pF C5,C7

Notes

  1. Install either BNC or SMA
  2. T1, T2 are 10 bifilar 28 AWG turns on FT37-43 toroid
  3. Match crystals within 250 Hz (easy when you start with 50 crystals

Transformer

  • T1, T2 are 10 bifilar 28 AWG turns on FT37-43 toroid

FT37-43 10 turns 9MHz.PNG

T1.PNG T2.PNG

SSB6 Etches PCB.PNG

In Transformer Footprint

In Transformer.PNG

Out Transformer Footprint

Out Transformer.PNG