Difference between revisions of "PiPicoMite01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 160: | Line 160: | ||
== Prototype == | == Prototype == | ||
− | + | === Running PicoMite (MaxiMite) BASIC (VGA, PS/2) === | |
* Uses cards | * Uses cards | ||
Line 169: | Line 169: | ||
* Pinouts | * Pinouts | ||
− | + | ==== Cabling ==== | |
{| class="wikitable" | {| class="wikitable" | ||
Line 350: | Line 350: | ||
|} | |} | ||
− | + | ==== VGAX49 ==== | |
[[FILE:VGAX49_P901-cropped-720px.jpg]] | [[FILE:VGAX49_P901-cropped-720px.jpg]] | ||
Line 403: | Line 403: | ||
|} | |} | ||
− | + | ==== PS2X49 ==== | |
[[FILE:PS2X49_P897_cropped_512pxV.jpg]] | [[FILE:PS2X49_P897_cropped_512pxV.jpg]] | ||
Line 409: | Line 409: | ||
* [[PS2X49]] | * [[PS2X49]] | ||
− | + | ==== SD CARD X49 ==== | |
[[FILE:SDCARDX49_P935_cropped-512px.jpg]] | [[FILE:SDCARDX49_P935_cropped-512px.jpg]] | ||
Line 415: | Line 415: | ||
* [[SD CARD X49]] | * [[SD CARD X49]] | ||
− | + | ==== GRID49 ==== | |
[[FILE:GRID49_WIRING.PNG]] | [[FILE:GRID49_WIRING.PNG]] | ||
Line 427: | Line 427: | ||
* D1 - GND | * D1 - GND | ||
* E1 - Audio_In-R | * E1 - Audio_In-R | ||
− | |||
== Mechanicals == | == Mechanicals == |
Revision as of 15:55, 16 May 2022
Contents
Features
- Raspberry Pi Pico
- All pins brought to header
- Pin marking on rear
- VGA (1:2:1 - R:G:B)
- PS/2 Keyboard
- 5V to keyboard with voltage translator
- SD Card
- Full size card
- Up to 32GB
- Stereo audio
- 3.5mm jack
- 16-bit GPIO
- MCP23017 port expander
- I2C1
- 2x20 0.1" pitch header
- Jumper selectable terminators
- Power options
- 5V power input via USB B or 0.1" pitch header
- 3.3V output header
- 120mmx70mm outline
- (4) 6-32 Mounting holes
Pin Marking on Rear
Schematic
Connectors
GP | FUNCTION | PICO PIN |
---|---|---|
GP6 | AUDIO-L | 9 |
GP7 | AUDIO-R | 10 |
GND | AUDIO-GND | 8 |
3.3V | PS2_3.3V | |
VSYS | PS2_5V | 39 |
GP8 | PS2_CLK | 11 |
GP9 | PS2_DATA | 12 |
GND | PS2_GND | 13 |
3.3V | SD_3.3V | |
GP12 | SD_MISO | 16 |
GP11 | SD_MOSI | 15 |
GP10 | SD_SCK | 14 |
GP13 | SD_SLVSEL | 17 |
GND | SD_GND | 18 |
GP18 | VGA_BLU | 24 |
GND | VGA_GND | 23 |
GP20 | VGA_GRN_HI | 26 |
GP19 | VGA_GRN_LO | 25 |
GP16 | VGA_HSYNC | 21 |
GP21 | VGA_RED | 27 |
GP17 | VGA_VSYNC | 22 |
H1 - 3.3V Power
SD Card
Pico Connectors
GPIO
Audio
PS/2 Keyboard
5V Distribution
VGA
Prototype
Running PicoMite (MaxiMite) BASIC (VGA, PS/2)
- Uses cards
- Pinouts
Cabling
FUNCTION | GP | PICO PIN | CARD | SIG | PIN | COLOUR |
---|---|---|---|---|---|---|
AUDIO-L | GP6 | 9 | GRID49 | AUD-L | C1 | VIO |
AUDIO-R | GP7 | 10 | GRID49 | AUD-GND | D1 | BLK |
AUDIO-GND | GND | 8 | GRID49 | AUD-R | E1 | YEL |
PS2_3.3V | 3.3V | 3.3V | 4 | RED | ||
PS2_5V | VSYS | 39 | PWR1 | 2 | ORG | |
PS2_CLK | GP8 | 11 | CLK1 | 6 | VIO | |
PS2_DATA | GP9 | 12 | DAT1 | 8 | YEL | |
PS2_GND | GND | 13 | GND | 10 | BLK | |
SD_3.3V | 3.3V | 3.3V | 7 | RED | ||
SD_MISO | GP12 | 16 | MISO | 2 | YEL | |
SD_MOSI | GP11 | 15 | MOSI | 4 | BLU | |
SD_SCK | GP10 | 14 | SCLK | VIO | ||
SD_SLVSEL | GP13 | 17 | -SDCS | GRY | ||
SD_GND | GND | 18 | GND | BLK | ||
VGA_BLU | GP18 | 24 | VGA | B4 | 12 | BLU |
VGA_GND | GND | 23 | VGA | GND | 19 | GRN |
VGA_GRN_HI | GP20 | 26 | VGA | G5 | 6 | GRN |
VGA_GRN_LO | GP19 | 25 | VGA | G4 | 7 | GRN |
VGA_HSYNC | GP16 | 21 | VGA | HS | 17 | GRY |
VGA_RED | GP21 | 27 | VGA | R4 | 1 | ORG |
VGA_VSYNC | GP17 | 22 | VGA | VS | 18 | WHT |
VGAX49
- VGAX49
- Resistors Values
- Selected for 0.7V output on analog RGB pins
R,B | G RES | G | |||
---|---|---|---|---|---|
Rs | 75 | R1 | 390 | 75 | |
Rm | 270 | R2 | 820 | 264.298 | |
Vin | 3.3 | RM | 264.298 | 3.3 | |
Vout | 0.717 | 0.729 | |||
I (mA) | 9.57 | I (mA) | 9.73 |
PS2X49
SD CARD X49
GRID49
- GRID49
- Audio filter circuit
- C1 = Audio_In-L
- D1 - GND
- E1 - Audio_In-R