Difference between revisions of "ER-PROTO-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 8: | Line 8: | ||
* Three card set | * Three card set | ||
** Board interconnect headers duplicated on headers | ** Board interconnect headers duplicated on headers | ||
| + | ** 30mm wide front panel | ||
| + | ** 28mm wide panel and daughtercards | ||
* 6 POTS | * 6 POTS | ||
** Marked as RV1-RV5 | ** Marked as RV1-RV5 | ||
Revision as of 12:23, 25 October 2022
Features
- Eurorack Prototyping card set
- 6 HP wide (30mm) front panel
- 3U tall
- Three card set
- Board interconnect headers duplicated on headers
- 30mm wide front panel
- 28mm wide panel and daughtercards
- 6 POTS
- Marked as RV1-RV5
- Series resistors on pot wiper
- All 3 pot pins brought to top header
- 4 Jacks
- Marked J1-J4
- Tip/sleeve brought to header near middle/bottom
- Pots on top, jacks on bottom of card
- Easier to adjust pots without bumping into pots
- Pots more often accessed than jacks
- Large prototyping area
- 58 nodes with 3 holes per node (29 per "side")
- +12V, -12V down board edges
- 5V/GND down center of card
- Bussed connections horizontally
- Front Panel with generic labels
- Cover with White on Black P-Touch labels
Example
- Arduino NANO with quad Opamp example
