Difference between revisions of "LB-6802-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 102: | Line 102: | ||
=== Rev 1 === | === Rev 1 === | ||
+ | |||
+ | * Power supply noise Trips voltage monitor | ||
+ | ** Change C2 capacitor to 100 uF | ||
== Assembly Sheet == | == Assembly Sheet == | ||
* [http://land-boards.com/LB-6802-01/LB-6802-01_Rev1_ibom.html Interactive BOM] | * [http://land-boards.com/LB-6802-01/LB-6802-01_Rev1_ibom.html Interactive BOM] |
Revision as of 22:39, 2 September 2024
Contents
Features
- 68B02 CPU
- 1.8432 MHz clock
- MC6802 is fully compatible with MC6800 but without messy two-phase clocking
Memory Map
- 0x0000-0x7FFF 32KB SRAM
- 0x8000-0xBFFF Serial (68B50 ACIA)
- 0xC000-0xFFFF 16KB EPROM
Design
CPU
MC6800 Block Diagram
Bus Timing
Power Supervisor/Reset
PLD
- ATF16V8B part
- TL866ii Plus Programmer
PLD Listing
Name LB-6802-01_PLD; Partno ATF16V8B; Date 08/24/24; Revision 01; Designer DOUG G; Company LAND BOARDS LLC; Assembly LB680201_U2; Location Rustbelt, US; Device G16V8; /* */ /* Control inputs */ PIN 1 = CLK; PIN 2 = CPUA12; PIN 3 = CPUA13; PIN 4 = CPUA14; PIN 5 = CPUA15; PIN 6 = CPUREAD; PIN 7 = VPB; /* Added as wire on Rev 1 PCB */ PIN 8 = VPA; PIN 9 = VDA; /* Address Decode and Chip Select outputs */ PIN 12 = !ROMCS; PIN 13 = !IOCS; PIN 14 = !MEMRD; PIN 16 = !RAMCS; PIN 18 = RDY; ROMCS = CPUA15 & CPUA14 & VPB; RAMCS = !CPUA15 & VPB /* 0x0000-0x7FFF 32KB SRAM */ # CPUA15 & !CPUA14 & !CPUA13 & VPB; /* 0x8000-0x9FFF Free (8KB */ IOCS = CPUA15 & !CPUA14 & CPUA13 & VPB; /* 0xA000-0xBFFF Serial (ACIA) */ RDY = VPB; MEMRD = CPUREAD & VPB;
Backplane Connector
Software
- Simple-6802 Software
- How to Program and Interface the 6800 By Andrew C. Staugaard, Jr. 1980
- 6800 instruction set
Mechanicals
Checkout
Rev 1
- Power supply noise Trips voltage monitor
- Change C2 capacitor to 100 uF