Difference between revisions of "LB-MEM-02"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Rev 1) |
Blwikiadmin (talk | contribs) (→Rev 1) |
||
| Line 75: | Line 75: | ||
* SRAM passes in TL866 in SRAM test mode | * SRAM passes in TL866 in SRAM test mode | ||
* Test using [https://raw.githubusercontent.com/douggilliland/Retro-Computers/master/6809/LB-6809/ramLoop/ramLoop.asm ramLoop.asm] software | * Test using [https://raw.githubusercontent.com/douggilliland/Retro-Computers/master/6809/LB-6809/ramLoop/ramLoop.asm ramLoop.asm] software | ||
| − | ** | + | ** Code works on [http://6809.uk/ 6809 Emulator] |
*** Forcing an error works | *** Forcing an error works | ||
** Check on card without SRAM | ** Check on card without SRAM | ||
Revision as of 15:23, 7 September 2024
Contents
Features
- 32KB SRAM
- 16KB EPROM
- Headers to select PROM bank
- Connects to Address/Data and Memory control lines
- 50x75mm card
Design
SRAM
EPROM
- ATF16V8B part
- TL866ii_Plus_Programmer
- LB-65CXX-01 card has 16 KB PROM from 0xC000-0xFFFF
- LB-6802-01 card has 16 KB PROM from 0xC000-0xFFFF
- LB-6809-01 card has 16 KB PROM from 0xC000-0xFFFF
- LB-Z80-01 card has 8KB PROM from 0x0000-0x1FFF (upper 8KB is not used)
Parts/Jumpers
27C256/27C512 EPROMs
- Card has a 16KB size from the CPU
- 27C256 (32KB) and 27C512 (64KB) Flash EPROMs are commonly available
- Jumpers allow firmware banks to be selected
- 2 banks in 27C256
- 4 banks in 27C512
Backplane Connector
Mechanicals
Rev 3
Rev 2
Rev 1
Checkout
Rev 3
- Adds PWR and GND on U1 (74HC04)
Rev 2
- Flips 74HC04
- Missing PWR and GND on U1 (74HC04)
Rev 1
- Missing PWR and GND on U1 (74HC04)
- Added PWR and GND wires to nearest pins with PWR and GND
- SRAM passes in TL866 in SRAM test mode
- Test using ramLoop.asm software
- Code works on 6809 Emulator
- Forcing an error works
- Check on card without SRAM
- Controls/data look OK
- Code works on 6809 Emulator
