Difference between revisions of "TL866ii Plus Programmer"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 6: | Line 6: | ||
== Flash Memory Programming Example == | == Flash Memory Programming Example == | ||
| − | === Flash Memory (EEPROM) Programming | + | === Flash Memory (EEPROM) Programming === |
* Program using [[TL866ii_Plus_Programmer|TL-866ii plus programmer]] | * Program using [[TL866ii_Plus_Programmer|TL-866ii plus programmer]] | ||
Revision as of 16:21, 18 August 2024
- Part pin 1 to pin 1 nearest lever
- Ex:
Flash Memory Programming Example
Flash Memory (EEPROM) Programming
- Program using TL-866ii plus programmer
- File = S68K_001.hex
- Set EPROM offset when file is loaded to accommodate memory map offsets for EPROM space
- Set From File Start Addr(Hex) to 80000
- To Buffer Start Addr(Hex) to 00000 (should be already that value)
- Using SST 27SF256 part
- Part is 32 KB
- Got Device ID error
- Turn off ID checkbox in the Options section (bottom left of window)
- Device programmed/verified
- Memory Buffer should look like
