Difference between revisions of "TL866ii Plus Programmer"

From Land Boards Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
* USed to program EPROMs, PLDs, MPUs
 
* USed to program EPROMs, PLDs, MPUs
* Can be used to check parts
+
** 27C256, 27C512 Flash memories
 +
** ATF16V8 PLDs
 +
** ATMega CPUs
 +
* Can be used to test logic parts
 
* [https://www.aliexpress.us/item/2251832777409293.html?spm=a2g0o.order_list.order_list_main.5.2e9718022WWpPy&gatewayAdapt=glo2usa4itemAdapt TL866 on AliExpress]
 
* [https://www.aliexpress.us/item/2251832777409293.html?spm=a2g0o.order_list.order_list_main.5.2e9718022WWpPy&gatewayAdapt=glo2usa4itemAdapt TL866 on AliExpress]
 
** [http://www.xgecu.com/MiniPro/TL866II_List.txt TL866ii Supported Device list]
 
** [http://www.xgecu.com/MiniPro/TL866II_List.txt TL866ii Supported Device list]

Revision as of 14:42, 28 August 2024

Ordered on AliExpress

TL866ii-plus.jpg

T48 Programmer

  • AKA, TL866-3G (3rd gen TL866)
    • Less expensive, updated design
  • There's also a cheaper version TL866-3G (on AliExpress) - can be found for less if you look around

PLD Programming TL866 3G.PNG

== Part goes to top of socket nearest lever

  • Part pin 1 to pin 1 nearest lever
    • Ex:

TL866ii Plus.PNG

Flash Memory Programming Example

Flash Memory (EEPROM) Programming

  • Program using TL-866ii plus programmer
  • File = S68K_001.hex
  • Set EPROM offset when file is loaded to accommodate memory map offsets for EPROM space
    • Set From File Start Addr(Hex) to 80000
    • To Buffer Start Addr(Hex) to 00000 (should be already that value)
  • Using SST 27SF256 part
    • Part is 32 KB

SIMPLE-68008 EEPROM Programmer-02.PNG

  • Got Device ID error
    • Turn off ID checkbox in the Options section (bottom left of window)
  • Device programmed/verified
  • Memory Buffer should look like

SIMPLE-68008 EEPROM Programmer.PNG

PLD Programming

PLD Programming TL866.PNG