Difference between revisions of "TL866ii Plus Programmer"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 18: | Line 18: | ||
** [http://www.xgecu.com/MiniPro/T48_List.txt Supported device list] | ** [http://www.xgecu.com/MiniPro/T48_List.txt Supported device list] | ||
** Includes typical Flash ROMs and ATF16V8 PLDs | ** Includes typical Flash ROMs and ATF16V8 PLDs | ||
| + | XGecu T48 (TL866-3G) hardware Parameters: | ||
| + | * 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ | ||
| + | * Volume: 10X6.5X2.8 cm (almost the same as TL866II) | ||
| + | * 16 channel ISP | ||
| + | Total 56-channel dedicated IO | ||
| + | 56-channel high-speed high-voltage isolation | ||
| + | * VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable. | ||
| + | * Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface. | ||
| + | * Self-test function, self-test each pin of VPP/VCC/GND/IO | ||
| + | * Suitable for developers and maintenance personnel, can do small batch production for high capacity chips, support simultaneously working with 4 Programmers on each computer. | ||
| + | *Support operating Systems: Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11 | ||
[[file:PLD_Programming_TL866_3G.PNG]] | [[file:PLD_Programming_TL866_3G.PNG]] | ||
Revision as of 17:34, 28 August 2024
Contents
Ordered on AliExpress
- USed to program EPROMs, PLDs, MPUs
- 27C256, 27C512 Flash memories
- ATF16V8 PLDs
- ATMega CPUs
- Can be used to test logic parts
- TL866 on AliExpress
T48 Programmer
- AKA, TL866-3G (3rd gen TL866)
- Less expensive, updated design
- On AliExpress) - can be found for less if you look around
- Supported device list
- Includes typical Flash ROMs and ATF16V8 PLDs
XGecu T48 (TL866-3G) hardware Parameters:
- 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ
- Volume: 10X6.5X2.8 cm (almost the same as TL866II)
- 16 channel ISP
Total 56-channel dedicated IO 56-channel high-speed high-voltage isolation
- VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable.
- Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface.
- Self-test function, self-test each pin of VPP/VCC/GND/IO
- Suitable for developers and maintenance personnel, can do small batch production for high capacity chips, support simultaneously working with 4 Programmers on each computer.
- Support operating Systems: Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11
== Part goes to top of socket nearest lever
- Part pin 1 to pin 1 nearest lever
- Ex:
Flash Memory Programming Example
Flash Memory (EEPROM) Programming
- Program using TL-866ii plus programmer
- File = S68K_001.hex
- Set EPROM offset when file is loaded to accommodate memory map offsets for EPROM space
- Set From File Start Addr(Hex) to 80000
- To Buffer Start Addr(Hex) to 00000 (should be already that value)
- Using SST 27SF256 part
- Part is 32 KB
- Got Device ID error
- Turn off ID checkbox in the Options section (bottom left of window)
- Device programmed/verified
- Memory Buffer should look like
PLD Programming
