Difference between revisions of "LB-Z80-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 105: | Line 105: | ||
* [[SIMPLE-Z80#Software|SIMPLE-Z80 Software]] | * [[SIMPLE-Z80#Software|SIMPLE-Z80 Software]] | ||
+ | |||
+ | === Register Set === | ||
+ | |||
+ | [[file:Z80_Registers.PNG]] | ||
=== Assembler files (for Windows/DOS) === | === Assembler files (for Windows/DOS) === |
Revision as of 12:16, 19 September 2024
Features
- Z80 CPU
- Oscillator 8 MHz nominal on card
- Reset switch/power monitor
- Address decoder PLD drives RAM/ROM/IO chip selects
- 100x50mm card
Memory Map
- 0x0000-0x1FFF 8KB ROM
- 0x2000-0xFFFF 56KB SRAM
- I/O
- 0x00-0x7F - Free
- 0x80-0x81 - Serial port (ACIA)
Design
CPU and Power Supervisor/Reset
- Z80 CPU
- Oscillator 8 MHz nominal on card
- Reset switch/power monitor
Memory Access Timing
I/O Access Timing
Oscillator
- 8MHZ or 10 MHz oscillator
PLD
- ATF16V8B part
- TL866ii Plus Programmer
PLD Listing
Name LB-Z80-01_PLD; Partno ATF16V8B; Date 09/17/20; Revision 01; Designer DOUG G; Company LAND BOARDS LLC; Assembly LB-Z80-01_U2; Location Rustbelt, US; Device G16V8; /* */ /* Control inputs */ PIN 1 = CLK; PIN 2 = CPUA13; PIN 3 = CPUA14; PIN 4 = CPUA15; PIN 5 = !MREQ; PIN 6 = !IORQ; PIN 7 = !M1; PIN 8 = !CPURD; PIN 9 = !CPUWR; /* Address Decode and Chip Select outputs */ PIN 13 = !ROMCS; PIN 14 = !IOCS; PIN 16 = !MEMRD; PIN 15 = !RAMCS; PIN 18 = !WAIT; ROMCS = !CPUA15 & !CPUA14 & !CPUA13 & MREQ & CPURD; RAMCS = CPUA15 & MREQ # CPUA14 & MREQ # CPUA13 & MREQ; IOCS = !M1 & IORQ; WAIT = !MREQ # !IORQ; MEMRD = CPURD;
Backplane Connector
Software
Register Set
Assembler files (for Windows/DOS)
- _ASSEMBLE.BAT - double-click in Windows to run the assembly if needed
- TASM.EXE
- TASM80.TAB
References
- Z80 Assembly Language Programming - Concise description of the register set, Chapter 3 page 1-42 of Z80, assembly language programming by Leventhal, Lance A.
- Programming the Z80 1980 Rodnay Zaks
- Z80, assembly language programming by Leventhal, Lance A., 1945-
- ASCII Table
Mechanicals
Checkout
Rev 1
- Didn't use silkscreen values, used
- R1 = 4.7K
- Other resistors are 10K
- Z80 nop tester nop = 0x00
- Refresh complicates this