Difference between revisions of "TL866ii Plus Programmer"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | [[file:TL866ii-plus.jpg]] | ||
| + | |||
== Ordered on AliExpress == | == Ordered on AliExpress == | ||
| − | |||
[https://www.aliexpress.us/item/2251832777409293.html?spm=a2g0o.order_list.order_list_main.5.2e9718022WWpPy&gatewayAdapt=glo2usa4itemAdapt TL866 on AliExpress] | [https://www.aliexpress.us/item/2251832777409293.html?spm=a2g0o.order_list.order_list_main.5.2e9718022WWpPy&gatewayAdapt=glo2usa4itemAdapt TL866 on AliExpress] | ||
Revision as of 17:02, 18 August 2024
Contents
Ordered on AliExpress
== Part goes to top of socket nearest lever
- Part pin 1 to pin 1 nearest lever
- Ex:
Flash Memory Programming Example
Flash Memory (EEPROM) Programming
- Program using TL-866ii plus programmer
- File = S68K_001.hex
- Set EPROM offset when file is loaded to accommodate memory map offsets for EPROM space
- Set From File Start Addr(Hex) to 80000
- To Buffer Start Addr(Hex) to 00000 (should be already that value)
- Using SST 27SF256 part
- Part is 32 KB
- Got Device ID error
- Turn off ID checkbox in the Options section (bottom left of window)
- Device programmed/verified
- Memory Buffer should look like
PLD Programming
