Difference between revisions of "PulseGen"

From Land Boards Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 +
[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/coax-tester-fast-edge-pulse-gen-50-or-75-ohm/]]
 +
 
[[File:PulseGen_5242-720px.JPG]]
 
[[File:PulseGen_5242-720px.JPG]]
  

Revision as of 23:26, 29 December 2019

Tindie-mediums.png

PulseGen 5242-720px.JPG

Features

  • Power Supply from 2V to 6V range so battery operation is possible eliminating need for power supply, etc
  • 5mm Terminal Block for power allows for batteries, etc to be easily connected without soldering
  • Very fast pulse edge (typical 2 nS rise time) and symmetric high/low drive.
  • 50 or 75 Ohm (other values could be made, send us your specs and we can add them)
  • BNC connectors on both ends
  • Connectors are a stuffing option with either BNC or SMA connectors (SMA is a special order so contact us)
  • Four mounting holes - 4-40 holes
  • Rounded corners fit more easily into plastic enclosures with inside radius at the corners
  • Nuts and washers for BNC mounting included
  • Small size (1.8" x 1.3)

Assembly Sheet