Difference between revisions of "OPTOFAST"

Revision as of 23:53, 29 December 2019

See our other Optocoupler cards

OPTOFAST-2 - Speed improved 4 channel optocoupler card - Suggested replacement for this card
OPTOSMALL - Four channel optocoupler card
OPTOOUT8-I2C - Eight channel optocoupler card - I2C interface
OPTOUSB - Optically coupled USB to FTDI interface
OPTOFASTBI - Two Optos in Two Directions

Opto-Isolator card
4-Channels
4N25 Optoisolators
Input /Output isolation
Transistor driver for Opto LED reduces required drive from 10 mA to under 500 uA
Input channels share their own common VCC/Ground
Output channels share their own common Vcc/Ground
8-pin header for input
8-pin header for output
Configuration Options (Speed enhanced, Bypass Input transistors, Remove Output collector resistors)
49x49mm
(4) 4-40 mounting holes

Revision as of 18:38, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) (Created page with "== OPTOFAST - 4 Channel Optocoupler Card == See our other Optocoupler cards * OPTOFAST-2 - Speed improved 4 channel optocoupler card - Suggested replacement for this card *...")		Revision as of 23:53, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) Newer edit →
Line 1:		Line 1:
		+	[[File:tindie-mediums.png\|link=https://www.tindie.com/products/land_boards/4-channel-opto-coupler-card-optofast/]]
		+
	== OPTOFAST - 4 Channel Optocoupler Card ==		== OPTOFAST - 4 Channel Optocoupler Card ==