PiPicoMite02 Rev1 Assembly Sheet
Parts List
Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
---|---|---|---|---|---|---|---|---|
1 | 4 | C1, C2, C7, C8 | 0.1uF | 15 | 1 | J1 | Header, 1x5 | |
2 | 2 | C3, C5 | 47nF | 16 | 2 | J2, J3 | Header, Female. 1x20 | |
3 | 2 | C4, C6 | 47uF | 17 | 1 | J4 | Header, 1x2 | |
4 | 1 | D1 | MBR0520T1J | 18 | 1 | J5 | Header, Vert, 2x2 | |
5 | 1 | D2 (alt for D1) | 1N5819 Mouser | 19 | 1 | J6 | Header, Vert, 2x8 | |
6 | 7 | R1-R3, R5, R10, R12, R15 | 2.2K | 20 | 1 | J7 | Header, Vert, 2x3 | |
7 | 2 | R4, R9 | 270 | 21 | 1 | J8 | AudioJack3 Mouser | |
8 | 1 | R6 | 390 | 22 | 1 | J9 | CONN, DB15HD, BLUE (VGA) Mouser | |
9 | 1 | R7 | 820 | 23 | 1 | J10 | USB-B Mouser | |
10 | 2 | R8, R13 | 1K | 24 | 1 | J11 | PS2_DIN6 ebay search | |
11 | 2 | R11, R14 | 47 | 25 | 1 | P1 | DB37 female | |
12 | 2 | R16, R17 | 10K | 26 | 1 | U1 | Raspberry Pi Pico RP2040 Digikey Adafruit Mouser | |
13 | 1 | U3 | TXS0104EDR or TXS0104ED | 27 | 2 | U2, U4 | MCP23017_SP Adafruit optional Socket. 28-pin, 0.3in Mouser quality part | |
14 | 1 | SD1 | Conn, SD Card Mouser |
Notes
- Install either D1 or D2
- Can use 1N400x in place of Schottky diode at D1/D2 location
- DC can be provided via header pins on J7 so J10 (USB B power connector) can be omitted
- U2, U4 sockets are optional
- Install shunts at J4, J5 as required per wiki page
- Resistor pads fit either 1/8W or 1/4W parts (1/4W shown here)