Difference between revisions of "ArduinoInABox Assembly Instructions Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Notes) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | [[file:ArduinoInABox_CAD_X1.png]] | |
== Parts List == | == Parts List == | ||
{| class="wikitable" | {| class="wikitable" | ||
| + | ! Item | ||
! Qty | ! Qty | ||
| + | ! Reference(s) | ||
! Value | ! Value | ||
| − | |||
! | ! | ||
| + | ! Item | ||
! Qty | ! Qty | ||
| + | ! Reference(s) | ||
! Value | ! Value | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
| 1 | | 1 | ||
| − | | | + | | 1 |
| C1 | | C1 | ||
| + | | 10uF | ||
| | | | ||
| + | | 9 | ||
| 2 | | 2 | ||
| − | | | + | | J2, J3 |
| − | | | + | | Header, Straight or Right Angle, 1x8 |
|- | |- | ||
| 2 | | 2 | ||
| − | | | + | | 7 |
| − | + | | C2-C8 | |
| + | | 0.1uF (0805) | ||
| | | | ||
| − | | | + | | 10 |
| − | | Header, | + | | 3 |
| − | + | | J4, J7-J8 | |
| + | | Header, 1x2 (Note 1) | ||
|- | |- | ||
| − | | | + | | 3 |
| + | | 3 | ||
| + | | R1-R3 | ||
| 10K (0805) | | 10K (0805) | ||
| − | |||
| | | | ||
| + | | 11 | ||
| 1 | | 1 | ||
| − | |||
| J5 | | J5 | ||
| + | | Header, Straight or Right Angle, 2x13 | ||
|- | |- | ||
| − | | | + | | 4 |
| − | | | + | | 2 |
| − | | | + | | R10, R11 |
| + | | 2.2K (0805) | ||
| + | | | ||
| + | | 12 | ||
| + | | 2 | ||
| + | | J6, J9 | ||
| + | | Header, Right Angle, 1x2 | ||
| + | |- | ||
| + | | 5 | ||
| + | | 2 | ||
| + | | L1, L2 | ||
| + | | Ferrite Bead (0805) | ||
| | | | ||
| + | | 13 | ||
| 1 | | 1 | ||
| − | |||
| J99 | | J99 | ||
| + | | DC Jack | ||
|- | |- | ||
| + | | 6 | ||
| 1 | | 1 | ||
| − | | | + | | J1 |
| − | | | + | | OLED_I2C (0.91 or 0.96) |
| | | | ||
| + | | 14 | ||
| 3 | | 3 | ||
| − | | BNC ( | + | | P1-P3 |
| − | + | | BNC (Note 2) | |
|- | |- | ||
| + | | 7 | ||
| 1 | | 1 | ||
| − | | | + | | U1 |
| − | | | + | | Arduino Pro Mini (3.3V or 5V) |
| | | | ||
| + | | 15 | ||
| 3 | | 3 | ||
| − | | SMA ( | + | | P4-P6 |
| − | + | | SMA (Note 3) | |
|- | |- | ||
| + | | 8 | ||
| 1 | | 1 | ||
| − | |||
| SW1 or SW2 | | SW1 or SW2 | ||
| + | | Rotary Encoder w Switch | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 77: | Line 95: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | == Notes == | ||
| + | |||
| + | <pre> | ||
| + | Note 1: J4, J7 J8 connect to BNC or SMA connectors | ||
| + | Note 2: J6, J9 Power options | ||
| + | Install J9 to use raw power from DC Jack | ||
| + | Don't install MINI-360 if J9 is used | ||
| + | Install J6 is Mini360 is used | ||
| + | Adjust output voltage before installing J6 shunt | ||
| + | Note 3: On-board BNC or SMA connectors | ||
| + | P1-P3 are BNC connectors | ||
| + | Can use P4-P6 SMA instead | ||
| + | </pre> | ||
| + | |||
| + | * Off-board output | ||
| + | ** Use [[DB25-02]] card for I/O | ||
Latest revision as of 08:54, 22 May 2022
Parts List
| Item | Qty | Reference(s) | Value | Item | Qty | Reference(s) | Value | |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | C1 | 10uF | 9 | 2 | J2, J3 | Header, Straight or Right Angle, 1x8 | |
| 2 | 7 | C2-C8 | 0.1uF (0805) | 10 | 3 | J4, J7-J8 | Header, 1x2 (Note 1) | |
| 3 | 3 | R1-R3 | 10K (0805) | 11 | 1 | J5 | Header, Straight or Right Angle, 2x13 | |
| 4 | 2 | R10, R11 | 2.2K (0805) | 12 | 2 | J6, J9 | Header, Right Angle, 1x2 | |
| 5 | 2 | L1, L2 | Ferrite Bead (0805) | 13 | 1 | J99 | DC Jack | |
| 6 | 1 | J1 | OLED_I2C (0.91 or 0.96) | 14 | 3 | P1-P3 | BNC (Note 2) | |
| 7 | 1 | U1 | Arduino Pro Mini (3.3V or 5V) | 15 | 3 | P4-P6 | SMA (Note 3) | |
| 8 | 1 | SW1 or SW2 | Rotary Encoder w Switch |
Notes
Note 1: J4, J7 J8 connect to BNC or SMA connectors
Note 2: J6, J9 Power options
Install J9 to use raw power from DC Jack
Don't install MINI-360 if J9 is used
Install J6 is Mini360 is used
Adjust output voltage before installing J6 shunt
Note 3: On-board BNC or SMA connectors
P1-P3 are BNC connectors
Can use P4-P6 SMA instead
- Off-board output
- Use DB25-02 card for I/O
